NETGEAR EPS90W User manual

Installation Guide
External Power Adapter
Model EPS90W, EPS130W, and EPS200W
WARNING: Read this document first before connecting the new
power adapter to a device.
Package contents
• Power adapter
• Power cord (varies by region)
• Installation guide
Flexible PoE power budget
For NETGEAR switches that support a flexible PoE budget, you
can increase or decrease the available PoE power. To do this, you
must first change the PoE power budget setting for the switch and
then connect the new power adapter. For managed switches, log
in to the local browser interface to change the PoE power budget.
Unmanaged switches come with a physical PoE power budget
setting on the hardware.
Note: Only connect the power adapter to a compatible NETGEAR
switch listed in the following table.
Switch
Model
Power Adapter
Model
Power Adapter
Wattage
PoE+ Power
Wattage
GC108P and
GC108PP
EPS130W 130W 126W
GS110TPP EPS130W 130W 120W
EPS200W 200W 190W
GS108LP and
GS108PP
EPS90W 90W 83W
EPS130W 130W 123W
GS116LP and
GS116PP
EPS90W 90W 76W
EPS130W 130W 115W
EPS200W 200W 183W
Register with the NETGEAR Insight app
Use the NETGEAR Insight app to register your new power adapter
(and your switch if you haven’t already) to activate your warranty
and access support.
1. On your iOS or Android mobile device or tablet, visit the app
store, search for NETGEAR Insight, and download the latest
version of the app.
2. Open the NETGEAR Insight app.
3. If you did not set up a NETGEAR account, tap Create
NETGEAR Account and follow the onscreen instructions.
4. Enter the email address and password for your account and
tap LOG IN.
5. To register the new power adapter, tap the menu in the upper
left corner and select Register Any NETGEAR Device.
6. Scan the serial number barcode using the camera on your
mobile device, or manually enter the 13-digit serial number.
7. Tap Go.
8. To register your switch, repeat Steps 5–7.

May 2019
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get
help, access the latest downloads and user manuals, and join our
community. We recommend that you use only official NETGEAR
support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce
document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in
Canadian French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU
Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the
power supply.
Do not use this device outdoors. If you connect cables or devices
that are outdoors to this device, see
http://kb.netgear.com/000057103 for safety and warranty
information.
Managed switch: connect the power
adapter and set the new PoE budget
1. Disconnect the current power adapter from your switch.
2. Connect the new power adapter to the switch and plug it in to
an electrical outlet.
3. Launch a web browser on a computer that is on the same
network as the switch.
4. Log in to the local browser interface of the switch.
For information about how to log in, see the user manual for
your switch, which you can download from
https://www.netgear.com/support/.
5. In the System tab, select PoE.
6. Select the power adapter.
7. Click the Apply button.
The PoE budget for the switch is set to that of the new power
adapter.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Unmanaged switch: change the PoE
budget and connect the power adapter
Follow these steps for switch models that support flexible PoE.
1. Power down the switch and disconnect the current power cord.
2. Use a screwdriver to remove the metal plate that covers the
slider.
3. Move the slider to the setting that
corresponds to the wattage of the
new power adapter.
4. Replace the metal plate.
5. Connect the new power adapter
to the switch and plug it in to an electrical outlet.
The switch operates at the PoE budget allowable by the power
adapter.
3.7A (GS116PP)
2.4A
1.66A (GS116LP)
54V
54V
54V