New Cat Condos 190091 User manual

New Cat Condos Kitty Cat Tree
SKU: 190091
Assembly Instructions
Package contents:
1 - Base, Mid Perch, Single Post & Top Bed
3 - Connecting Rods
1 - Glue Bottle
Follow these easy steps:
Softly, insert the rods in each of the holes of the middle perch (see Figure 2).
1
In a large, open area, open the box
and remove all contents
3
2
Before placing the first 2 connecting rods into the holes
place a generous amount of glue around the entire rod.
Dor this for both rods. Wipe off any excess glue with a
damp cloth (see Figure 1).
Add glue to the visible ends of the rods and connect them to the base
perch (see Figure 3).
4
5
Add glue to the remaining rod and insert it in the single post. Then add glue to
the visible end of the rod and insert it into the hole of the middle perch
(see FIgure 5).
Allow glue to dry for 24 hours. If glue does not adhere to material reapply a heavy
spread and let dry for 24 hours. Wipe up any excess glue with a clean damp cloth.
6
Lastly, take the tray and screw it to the top of the single post. Rotate clockwise
until tightened. DO NOT OVER TIGHTEN (see FIgure 5).

Figure 1
Figure 4
Figure 3
Figure 2
Figure 5