New Cat Condos Cat Stairway User manual

New Cat Condos Cat Stairway
SKU: 190109
Assembly Instructions
Package contents:
1- Base, Middle Perch, Top Perch
3- Connecting Rods
1- Glue Bottle
Follow these easy steps:
Add glue to the visible ends of the rods & connect the middle perch to the top
of the base by inserting rod ends into the holes (see Figure 3).
1
In a large, open area, open the box
and remove all contents
3
2
Softly, insert each connecting rod containing glue into each hole of the middle
perch. Wipe off any excess of the glue with a wipe (see Figure 2).
Take the top perch & connect the screw (located under the top perch)
to the top of the middle perch & rotate clockwise until secured &
locked. DO NOT OVERTIGHTEN (see Figure 4).
4
Before placing the first 2 connecting rods into the holes, place a
generous amount of glue around the entire rod (see Figure 1).
5
6
Take the last Rod and add glue around one end, insert it in the hole
of the top perch, then add glue to the visible end & finally connect the
top perch to the middle perch (see Figure 5).
Allow glue to dry for 24 hours. If glue does not adhere to material reapply a heavy
spread and let dry for 24 hours. Wipe up any excess glue with a clean damp cloth.

Figure 1
Figure 3
Figure 2
Figure 4
Figure 5