AFi HBFB-CYN User manual

Before assembling your bed, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Congratulations!
Your headboard is now assembled.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Adult assembly
ASSEMBLY INSTRUCTIONS
Page 1 of 3
Step 1
Instructions apply for bed sizes
QUEEN > KING
PARTS LIST HARDWARE
READY
ASSEMBLE
TO
HEADBOARD PANEL 1 PC
1
2
3
4
5
1 PC
1 PC
1 PC
1 PC
LEFT LEG
RIGHT LEG
PILLOW STOP
FOOTBOARD
Allen wrench - 1pc
Barrel Nut - 2pcs
Spare - 1pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
JCB M6 X 40mm (1 1/2”) - 6 pcs
JCB M6 X 110mm (4 3/8”) - 2 pcs
Spare - 1 pc
Spare - 1 pc
B
C
E
D
AWooden dowel - 4 pcs
Spare - 1 pc
Attach the legs (2) and (3) to pillow stop (4), using JCB (C) and barrel nut (D). Do not tighten at this
step. Attach leg assembly to headboard panel (1), using wood dowels (A) and JCB (B).
Tighten all with the Allen wrench (E).
Adult assembly
41
2
3
D
A
C
D
D
C
C
A
B
B
B
B
B
B
B
A
A
A
PO:
CODE ITEM ITEM
HBFB-CYN R-29574X R-29575X
A
BED WITH MATCHING FOOTBOARD

Page 2 of 2
01
02
03
04
05
HARDWARE
HEADBOARD
FOOTBOARD
SIDE RAILS
SLAT KIT
BOX 1
04
04
04
02
03
Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below.
Step 1
Use the lower set of
pins.
Adult assembly
Adult assembly
Step 2
BOX 2
Attach slat kit (05) onto the bed. For assembly of slat kit, follow the assembly instructions
included with bed frame.
05
05

ASSEMBLY INSTRUCTIONS
Before assembling your bed frame, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Wood screw(1 1/4”) - 12 pcs
Spare - 1 pc
BED FRAME
Page 1 of 2
PARTS LIST HARDWARE
D
BE
F
SIDE RAILS
SLAT KIT
SUPPORT RAIL
SUPPORT LEGS
2 PCS
2 SET
2 PCS
4 PCS
1
2
3
4
Allen wrench M4 - 1pc
Allen wrench M6 - 1pc
Spare - 1pc
AJCB M6 X 30mm ( 1 1/8") - 6 pcs
CJCB M8 X 40mm ( 1 5/8") - 4 pcs
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
READY
ASSEMBLE
TO
QUEEN
PO: CODE ITEM
FR-KEW-LOM R-22224X
Spare - 1 pc
Spare - 1 pc
Cap Nut - 6 pcs
1
1
Adult assembly
Attach side rails (1) to the headboard and footboard. For assembly, follow
the assembly instructions included with your headboard and footboard.
Step 1
Lower set of pins.

Page 2 of 2
Congratulations!
Your bed is now ready for use.
D
Wood screw 1 1/4"
Step 3
Step 4
C
C
4
3
4
Attach support legs (4) to support rail (3) as shown below. Using JCB M8 (C)
tighten with Allen wrench M6 (F). Repeat the other.
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
QUEEN
JCB M8 X 40mm
JCB M6 X 30mm
Cap nut
C
A
B
Attach support rail (3) to the slat kit (2) as shown below. Using JCB M6 X 30mm (A)
and cap nut (B). Tighten with Allen wrench M4 (E).
Using wood screw (D) tighten with Phillips head screwdriver. (Customer supplied)
D
D
D
D
D
D
D
D
D
D
D
D
A
A
A
A
A
A
2
23
3
B
B
B
B
B