Costco Recliner 18586 User manual

Recliner Assembl
y
Instruction
s
Part # Description Quantity Picture
1
Large Wooden Seat Base, Central Post,
Wooden Seat Frame (larger), Metal Arm
Rest Frame & Seat Cushion
1
Step 1: Step 2:
3 2-1/4” Machine Screws (φ8mm) 2
4 Nuts 2
6A Right Arm Pad 1
6B Left Arm Pad 1
7 1" Machine Screws (φ1/4") 6 Step 3: Step 4:
14 Wrenches 2
5 1" Joint Screws 2
2 Back Cushion 1
Place the following recliner parts on the floor:
1). The pre-assembled Large Wooden Seat Base, Central
Post, Large Wooden Seat Frame, Metal Arm Rest Frame
and Seat Cushion
2). Back Cushion
3). 6A Right Arm Pad and 6B Left Arm Pad
Attach the Back Cushion (2) onto the pre-assembled Large
Wood Seat Base, Central Post, Large Wooden Seat
Frame, Metal Arm Rest Frame & Seat Cushion (1). Align
the holes of the Metal Arm Rest Frame (1) to both sides of
the Back Cushion (2). Fasten by using 2-1/4" Machine
Screws (3).
Bring up the Back Cushion (2), Line up the holes of the tabs
on the bottom of the Back Cushion (2) and the metal rings
on the rear of the Seat Cushion (1). Insert the 1" Joint
Screws (5) through the metal rings in the Nuts (4) and
tighten the 1" Joint Screws (5).
Attach the Right Arm Pads (6A) and Left Arm Pad (6B)
onto the Metal Arm Rest Frame (1) using 1" Machine
Screws (7).
18586 RECLINER WITH OTTOMA
N
Recliner Parts & Hardware List
Please read the assembly instructions thoroughly and assemble this recliner per the assembly instructions. Please note that
using an incorrect assembly method may damage the structure of this recliner!
TWO PEOPLE ARE RECOMMENDED FOR BACK
CUSHION ASSEMBLY!

Ottoman Assembly Instructions
Part # Description Quantity Picture
7 1” Machine Screws (φ1/4") 4
8 1-5/8” Machine Screw (φ8mm) 4
9 Spring Washers 4
10 Flat Washers 4
Step 1: Step 2:
13 Smaller Wooden Ottoman Base 1
14 Wrenches 1 Step 3:
12 Smaller Wooden Ottoman Frame 1
11 Ottoman Cushion 1
Turn the Ottoman Cushion (11) upside down on the floor
and attach the now assembled Wooden Ottoman Frame
(12) and Wooden Ottoman Base (13) on the Ottoman
Cushion (11) by using 1" Machine Screws (7) and tighten
the Machine Screws (7).
Place the following ottoman parts on the floor:
11). Ottoman Cushion
12). Smaller Wooden Ottoman Frame
13). Smaller Wooden Ottoman Base
Turn the Smaller Wooden Ottoman Frame (12) upside
down on the floor and attach the Smaller Wooden Ottoman
Base (13) onto the top of the Smaller Wooden Ottoman
Frame (12). Fasten by using 1-5/8" Machine Screws (8)
with Spring Washers (9) and Flat Washers (10). Tighten all
screws.
OPERATING INSTRUCTIONS
While seated in the Recliner, reach to the right side of the Recliner and
find the adjustment knob. Turn the adjustment knob counter-clockwise
and the Back Seat Cushion will recline back. To lock the Back Seat
Cushion into desired position, turn the adjustment knob clockwise until
tightened.
Ottoman Parts & Hardware List