New Classic Furniture HUDSON D3832-60-REC User manual

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Please read the instructions thoroughly before assembly.
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not tighten screws or bolts until the assembly is completed.
3. To level the chairs or table, before tightening all the screws, the chairs or table must be place on a flat
surface and then tighten the screws.
Assembly Instructions
MADE IN VIETNAM PAGE: 1 OF 3
4.Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
ITEM NO.D3832-60-REC
HUDSON 60" RECTANGLE DINING TABLE
& 4 CHAIR SET
PARTS LIST
NO.
A
COMPONENT
CUSHION
SEAT
SKETCH QTY.
4 PCS
B
CHAIR BACK
4 PCS
C FRONT LEG 8 PCS
NO.
1FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
HARDWARE LIST
COMPONENT SKETCH QTY.
44 PCS
244 PCS
NUT
5/16” DIA.
ALLEN
WRENCH
5/16” DIA.
3
12 PCS
4
16 PCS
LONG BOLT
1/4” x 3”
6
1 PC
SHORT BOLT
1/4” x 1 3/4”
5
16 PCS

MADE IN VIETNAM PAGE: 2 OF 3
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and
install the cushion seat.
STEP 2
Insert long bolts to secure the cushion seat.
STEP 3
Install the chair front legs once the cushion
seat is secured.
Assembly Instructions
21
5
4
B
A
4
2
1
6
B
A
1234
B
A
C
C
STEP 4
Complete.
ITEM NO.D3832-60-REC
HUDSON 60" RECTANGLE DINING TABLE
& 4 CHAIR SET

MADE IN VIETNAM PAGE: 3 OF 3
Assembly Instructions
NO.
1FLAT WASHER
5/16” DIA.
HARDWARE LIST
COMPONENT SKETCH QTY.
8 PCS
2SPRING WASHER
5/16” DIA. 8 PCS
3BOLT
5/16” x 65 MM 8 PCS
4ALLEN KEY
4 MM 1 PC
NO.
A
PARTS LIST
COMPONENT
TABLE TOP
SKETCH QTY.
1 PC
BTABLE LEG 4 PCS
To assemble the table, please follow the following
steps:
STEP 1: Install 4 of the table legs and tighten all
bolts.
A
ITEM NO.D3832-60-REC
HUDSON 60" RECTANGLE DINING TABLE
& 4 CHAIR SET
1
2
3
4
UP DOWN
ADJUSTABLE
LEVELER
B
B
B
B