Furniture of America Sion CM-AC6213 User manual

MODEL #
CM-AC6213
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-11-24
2 - People
Recommended
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
1 / 8

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 8

4 / 8

Shelf
Cam Lock
Ø14.5 x 1/2" Cam Lock Screw
Ø6 x 1-3/8" Wood Dowel
Ø6 x 1-3/16" Barrel Nut
Ø3/16 x 3/8"
Foot Top-Left Post Top
Right Post
Philip Head Screw
Ø3/16 x 1-3/4"
Wood Screw
Ø4 x 5/8" Wood Plug
Ø13 x 3/8"
Bottom
Left Post
Bottom
Right Post
Glue Screw Ø3 X 5/8" Flat Washer
Ø4 X 3/8"
Shelf Shelf Shelf Shelf
LADDER SHELF
CM-AC6213
#1 1pc #2 1pc #3 1pc #4 1pc #5 1pc
#6 1pc #7 1pc #8 1pc #9 1pc #10 1pc
#A 1pc #B 1pc #C 21pcs #D 10pcs #E 10pcs
#F 4pcs #G 10pcs #H 1pc #I 2pcs #J 4pcs
5 / 8

Screw
Ø3.5 X 3/4"
#1
#2
#3
#4
#5
#7
#8
#9
#10
#6
Glue Plug
#K 2pcs #L 2pcs #M 2pcs #N 1pc
Allen Wrench M4
Fabric
6 / 8

#3
#4 #5
#1
#2
#7
#8
#9
#10
#B
#A
#
#C
#E #C
#6
#D
#E #C
#D
#N
ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x1pc
Hardware #C x8pcs
Hardware #D x4pcs
Hardware #E x4pcs
Part #7 x1pc
Part #8 x1pc
Part #3 x1pc
Part #4 x1pc
Hardware #C x13pcs
Hardware #D x6pcs
Hardware #E x6pcs
Part #5 x1pc
Part #9 x1pc
Part #10 x1pc
Hardware #A x1pc
Hardware #B x1pc
Part #6 x1pc
7 / 8
Insert dowels (#C) to the shelves
(#1,2), then align top posts (#7,8) to
the shelves (#1,2). Secure by using
bolts (#E) onto barrel nuts (#D).
Insert dowels (#C) to the shelves
(#3,4,5), then align bottom posts (#9,10)
to the shelves (#3,4,5). Secure by using
bolts (#E) onto barrel nuts (#D).
Secure dowel (#C) and cam bolt
(#B) onto bottom of shelf (#5),
then align support leg (#6) to the
shelf (#5). Secure by using cam
lock (#A).

WALL
#L
#K#J
#M
#G
#F
#6
#I
#J
ASSEMBLY INSTRUCTIONS
3
Hardware #I x 2pcs
Hardware #J x4pcs
Hardware #K x2pcs
Hardware #F x4pcs
Hardware #G x10pcs
Hardware #L x2pcs
Hardware #M x2pcs
8 / 8
Adjust leveler on support
leg (#6) according to
ground level.
Insert plugs (#G) to cover bolts.
Align top to bottom, then
secure by using screws (#F).