New Classic Furniture D1701-52S User manual

1
ASSEMBLY INSTRUCTIONS
GIA COUNTER TABLE
DIA COUNTER CHAIR (SET INCLUDES 4 CHAIRS)
ITEM NO. D1701-52S
This page lists all the contents included in the Box. Please take time to identify the
hardware as well as the individual components to this product. As you unpack and
prepare for assembly, place the contents on a carpeted or padded area to protect
them from damage.
C l e a n i n g & C a r e
Treat the surface with care, clean it with a dry or damp soft cloth.
Do not use abrasive cleaners. Hardware may be loosen over time.
Periodically check that all connections are tight.
A Phillips screwdriver is necessary for assembly.

2
GENERAL INFORMATION, TIPS & TRICKS
1. Please read the assembly instructions prior to assembling this product.
2. To avoid damages, assemble this product on a non-abrasive surface such as a carpet.
3. Make sure all bolts and nuts are tightly fastened before the product is used.
4. Not for commercial use.
5. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the
wood as needed. Avoid prolonged exposure to moisture.
Please make sure you have all parts before beginning assembly. Please wait
until all steps are completed before tightening bolts. We recommend two
people to assemble.
Do not put hot pots or objects which are more than
80 degrees Fahrenheit directly on the table.
A Phillips screwdriver is necessary for assembly.

TABLE HARDWARE LIST
3
TABLE PART LIST
QTY: 2 PCS
C. Table Shelves
QTY: 4 PCS
B. Table LegsA. Table Top
QTY: 1 PC
QTY: 12 PCS
SIZE: 5/16" x 2 1/2"
QTY: 12 PCS QTY: 12 PCS
SIZE: 5/16" DIA
2. SPRING WASHERS1. ALLEN BOLTS
SIZE: 5/16" DIA
3. FLAT WASHERS
QTY: 1 PC
SIZE: 1/4” DIA
4. ALLEN WRENCH

STEP 1
Attach the Table Legs (B) to the Table Shelves (C) by using Allen Bolts (1), Spring Washers (2) and Flat
Washers (3). Do not tighten all bolts at this step.
STEP 2
Attach the Table Shelves (C) to the Table Legs (B) by using Allen Bolts (1), Spring Washers (2) and Flat
Washers (3). Do not tighten all bolts at this step.
4
TABLE ASSEMBLY INSTRUCTIONS

STEP 3
Attach the Table Legs (B) to the Table Top (A) using Allen Bolts (1), Spring Washers (2) and Flat Washers (3).
Make sure the table is level, and tighten all bolts by using Allen Wrench (4).
STEP 4
Turn the assembly upright. Place the Table Top (A) down to the assembly unit as shown.
Ensure the Table Legs ( B) are secured to the Table Top (A)
5
TABLE ASSEMBLY INSTRUCTIONS

SIZE: #8 x 1 1/2" LSIZE: 1/4" x 3"
QTY: 16 PCS
6. LONG BOLTS 7. WOOD SCREWS
QTY: 4 PCS
SIZE: 5/16" DIA
CP1:YTQSCP44:YTQSCP44:YTQ
SIZE: 5/16" DIA
TSLOBTROHS.5
SIZE: 1/4" x 1 3/4"
A. Back Legs
QTY: 48 PCS
CHAIR HARDWARE LIST
4. ALLEN WRENCH3. NUTS
SIZE: 5/16" DIA
CHAIR PART LIST
D. Front Legs(Left - Right)
QTY: 4 PCS QTY: 4 PCS
E. Side Stretchers (Left - Right) F. Front Stretchers
C. Cushion SeatsB. Seat Frames
QTY: 4 PCSQTY: 8 PCS QTY: 8 PCS
QTY: 16 PCS
6
SIZE: 5/16" DIA
2. SPRING WASHERS1. FLAT WASHERS
QTY: 12 PCS

7
STEP 1
Take the Allen Wrench, and turn the
bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolts.
Insert Side Stretchers ( ) into the holes of the Back Leg(AE ) with Wood Screws (7) by using Screwdriver
(not included). Do not fully tighten all screws in this step.
CHAIR ASSEMBLY INSTRUCTIONS
STEP 2
Put the Back Leg (A) and the Seat Frame (B) upside down on the soft and smooth surface.
Then insert Long Bolts (6), Short Bolts (5), Spring Washers(2), and Flat Washers (1) into the predrilled holes
of each corner, by using Allen Wrench (4).
A
1
2
5
4
6
4
21
B
B
A
E (Right)
7
7
E (Left)

8
CHAIR ASSEMBLY INSTRUCTIONS
First, insert the Front Stretcher (F) into the holes of the Front Legs (D) by using Wood Screws (7).
Attach the Front Legs (D) to the Side Stretchers (E) and the corner of Seat Frame (B). Insert Flat Washers (1),
Spring Washers (2), and Nuts (3), by using Allen Wrench (4). Tighten all Wood Screws (7) in this step.
STEP 4
STEP 3
Attach the Cushion Seat (C) onto the Seat Frame (B) with Wood Screws (7) by using Screwdriver
(not included).
7
3
2
1
4
A
B
D (Left)
E (Right)
D (Right)
E (Left)
7
7
F
7
7
7
7
7
7

9
CHAIR ASSEMBLY INSTRUCTIONS
Printed in Vietnam
Turn the assembled chair to the upright position carefully. Make sure the chair is level, and then
securely tighten all bolts at this stage. Assembly is now completed.
STEP 5