New Holland T4O4O User manual

NEW HOLLAND T4OOOF/N/V
T4O3O T4O4O T4O5O

Offered in three widths to suit a range of specialist applications, the T4000F/N/V tractor
series match high power to weight ratios to best in class manoeuvrability. Key features
include power outputs of 78, 87 and 97 hp, a wide transmission offering, cab or ROPS
and a choice of front axles.
POWERFUL AND COMPACT
Powered by all-new four-cylinder engines, the T4000F/N/V tractor series offers
unrivalled performance in a compact package.
SPECIALIST VERSATILITY
Few specialist tractors can match the all-round versatility of a T4000F/N/V tractor.
Available with tight turning SuperSteer, with automatic 4WD, these tractors can be
used in a wide range of applications.
PRODUCTIVE COMFORT
Available with an advanced, fully sealed Blue Cab, T4000F/N/V tractors match
unrivalled comfort in the most unforgiving environments with brilliant all-round
visibility.
ENGINEERED TO REDUCE COSTS
Long engine service intervals and low fuel consumption reduce the whole life
operating costs of all T4000F/N/V models.
STYLISH NEW T4000F/N/V. GREAT LOOKS,
23

BRILLIANT PERFORMANCE
T4OOOV*
Turning radius (m) 3.4
Rear Tyres * 280/85R28 ** 320/85R24 *** 340/85R28
All 4
cylinder
models
2.093 mm
All 4
cylinder
models
2.348 mm
All 4
cylinder
models
2.348 mm
Turning radius (m) 2.9 Turning radius (m) 2.9
T4OOON** T4OOOF***
1061 mm 1229 mm
2173 mm
2148 mm
2173 mm
1398 mm

COMPACT FOUR-CYLINDER POWER
With torque as high as 398 Nm and torque reserves
of up to 46%, T4000F/N/V tractors bring massive
performance to a compact tractor package.
Developed by Fiat Powertrain Technologies, the Tier III
power units are smooth running, fuel efficient and
quiet. Proven in existing T5000 and T6000 tractors,
these engines have long service intervals to minimise
operating costs.
CLEAN, FOUR-CYLINDER
INTERCOOLED EFFICIENCY
ENGINE45

MORE POWER AND TORQUE. SAME
FUEL CONSUMPTION
All T4000F/N/V models develop more
power and greater torque at a lower engine
speed when compared to the previous
TN-A speciality series. This increase in
output is achieved without an increase in
fuel consumption, this remaining at an
optimum 219 g/kWh for the range topping
T4050F/N/V.
INTERCOOLED EFFICENCY
By cooling the engine intake air, the intercooler
fitted to the T4000F/N/V power units boosts
combustion efficiency. This is of particular benefit
in high ambient temperatures, overall fuel use and
power development remaining consistent,
regardless of conditions.
ENGINEERED FOR 100% BIODIESEL
All T4000F/N/V are designed to operate on
biodiesel fuels without costly modifications.
Talk to your New Holland dealer for full details.
0
150
300
450
600
+ 100%
TN-A T4050
EASIER TO LOOK AFTER
From the outset, New Holland has designed all
T4000 models for ease of maintenance. A fast
access fuel flap allows speedy refuelling
without raising the one-piece engine hood.
Engine service intervals are as high as 600
hours on the T4050F/N/V.
(Nm)(g/kWh)
(rpm)
(rpm)
(rpm)
20
30
40
0
10
50
60
70
80
250
300
350
400
210
220
230
240
450
500
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
(kW)
Power
Torque
Fuel consumption
T4050 TN95FA
+35% TORQUE BACK-UP
(hours)

TRANSMISSION67
POWER CLUTCH
Dual command transmissions are
available with a Power Clutch option.
This allows the operator to use a push
button on the main shift lever to operate
the clutch. This makes changes on the
move fast, smooth and comfortable.
DUAL COMMAND™ OFFERS SO MUCH MORE
The 32x16 Dual Command™ transmission with power
shuttle offers the same number of ratios as Split
Command, but allows a high low push button ratio 'split'
to be made under full load and without using the clutch.
A 44x16 Dual Command transmission is available to meet
specialist requirements.
A WIDE CHOICE OF EFFICIENT TRANSMISSIONS
Thanks to the modular build of T4000F/N/V
tractors, the transmissions can be easily
matched to end user needs. Advanced
features include power shuttle, power clutch
and creep speed options.
8
7
6
5
4
3
2
1
32x16
16x16
44x16
TRANSMISSION CHOICE
Dual Command™ (optional
creeper / 30 kph / 40 kph)
Dual Command™
(30 kph / 40 kph)
Powershuttle
(30 kph / 40 kph)
Power Clutch button
Hi-button
Lo-button
Power Clutch button
+ Gear change
Low dual power
High dual power
forwardreverse kph
0551010 1515 2020 2525 3030 3535 4040
40,123
33,436
27,083
22,569
18,424
15,353
12,359
10,3
13,897
11,581
9,381
7,817
6,381
5,318
4,281
3,567
11,352
9,46
7,663
6,386
5,213
4,344
3,497
2,914
2,701
2,251
1,823
1,519
1,24
1,034
0,832
0,693
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
38,869
26,237
17,848
11,973
13,463
9,087
6,182
4,147
10,997
7,423
5,05
3,388
2,617
1,766
1,201
0,806
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
BL
BH
C
A

POWER SHUTTLE SPEED DIRECTION CHANGE
If a fast shuttle between forward and reverse is a priority,
consider the 16x16 Power Shuttle transmission. The
operator can simply use the electro-hydraulic shuttle lever
to change direction. From neutral, the shuttle lever can be
used to smoothly feed power to the transmission without
using the clutch.
CREEP SPEED OPTION
Creep speeds as low as 160 metres/hour are
available, enabling the tractor to carry out a
wide range of precision operations. These
transmissions are so flexible that this same low
speed can be matched to a ratio offering a 40
kph transport speed.

DESIGNED AROUND THE OPERATOR
Operator comfort is a key New Holland priority.
All controls are ergonomically designed and grouped
according to function. Noise and vibration levels are
tightly controlled, with light steering and class leading
visibility over the stylish engine hood all contributing to
reduced operator fatigue.
LOW CAB ROOF AND FOLDING ROPS
The Blue Cab models have a newly developed low
profile to reduce the overall height of the tractor.
ROPS models have a forward folding frame to clear
over-hanging crops or access low buildings.
SMALL IN SIZE, BIG IN COMFORT
OPERATOR ENVIRONMENT89

ALL THE INFORMATION YOU NEED
The new instrument display fitted to all
T4000F/N/V tractors is easy to read and
understand. The new display lists valuable
information including forward speed, PTO
speed, low fuel and the next service
interval.
HIGH COMFORT SEAT
Fitted with a deep cushion seat
pan and wide backrest, the seat
in T4000F/V/N tractors adjusts to
suit all sizes of operator. A choice
of mechanical or deluxe air
suspension seats are available.
BLUE CAB FOR HARSH ENVIRONMENTS
The sealed Blue Cab has thermostatically controlled air
conditioning developed to suit harsh environments. Anti-
pollen plus recirculation filters remove dust and pollutants.
The ventilation system draws in 20% more air than the
standard cab. A range of carbon filters can be specified.
BRIGHT LIGHTS FOR DARK NIGHTS
Two work lights are incorporated within the
main headlight cluster. Cab models have
two worklights built into the front and rear
roof panel. ROPS tractors have a single
rear mounted fender light.

SPECIALIST TRACTORS FOR SPECIALIST NEEDS
The modular build of T4000F/N/V tractors enables New Holland to offer a broad range of specifications that exactly matches
your specialised need. The standard hydraulic flow of all models is 48.6 Lpm. Need more flow? Specify the Megaflow pump,
and output can be increased to 63.8 Lpm.*
T4000F/N/V. Factory built to your specification.
* Standard for the Australian market.
PTO AND HYDRAULICS10 11
DIRECT OUTPUT, NO LOSS OF POWER
Engaged via a servo assisted control, the rear pto on
T4000F/N/V tractors has a direct driveline to minimise
power loss. Maximum engine power is directed to the
PTO for optimum efficiency and performance. A
choice of Ground Speed/540/540E/1000 PTO speeds
are available.
HYDRAULIC LINKAGE SETTINGS
Hydraulic stabilisers can be specified to allow the
attachment to be offset to either side of the tractor.
The stabilisers can be set in a fixed or float position by
the push of a button. A levelling ram can also be
specified for the right lower link arm. Both systems
have a dedicated hydraulic supply.
DIRECT PTO POWER OUTPUT