Newbealer NB308 User manual

COMPACT FABRIC
STEAMER
NB308
USER MANUAL
Please read this manual carefully before
using and keep this in a safe place for
future reference.

● The voltage of the power source must be compati-
ble with the voltage displayed on the rating plate of
this steamer (120V/60Hz).
● Always unplug the steamer before attaching or
detaching the attachment brush and filling or
emptying the water tank.
● DO NOT fill water past the maximum level. Fill to
MAX mark only (7.8 oz. / 230 ml). Overfilling may
result in burns from spilling water.
● The garment steamer provides a thermal safety
fuse to protect it from over-heating and an automatic
shut-off feature for safety protection when the unit
gets too low on water level. However, the steamer
should not be left unattended while it is connected to
power.
● This steamer should not be used by children. Only
allow dependents to use the steamer when under
proper supervision.
● Never place heavy or sharp objects on the
steamer's power cable.
● All cables should be positioned so they cannot be
tripped over or become obstructions.
● It is recommended to not plug in any other
appliances into the same circuit when the garment
steamer is in use to avoid overload.
● If the supplied power cord is damaged, it should
be replaced by a qualified technician.
● Do not expose the steamer to humidity and or use
it outdoors.
● Only fill the water tank with de-mineralized or
distilled water. Other liquids may damage the
steamer.
● Do not put any additives in the water tank. These
Safety Instructions
- 01 -

can damage the steamer.
● Never leave the steamer unattended when it is hot,
switched on, or connected to power.
● Do not use the steamer if it has fallen from a high
place, or if there are visible signs of damage or
leakage.
● Never use the steamer on clothes that are being
worn. Never direct the steamer towards people or
animals.
● There may be leakage from the steam head if the
steamer's temperature is not high enough to
vaporize water and generate steam. Therefore,
make sure the steamer is always preheated for 2
minutes before use.
● Before store the appliance, please wait half an
hour for the appliance to completely cool down.
● Only use officially provided attachments and
accessories.
- 02 -
Warning: While using the steamer, be sure to keep
it upright. Your steamer should never be tilted past a
45-degree angle to prevent spills.

Included Items
1 x Garment Steamer 1 x Fabric brush
1 x User Manual
*When unpacking the garment steamer, check if you have
received all the items listed.
Product Details
Product: COMPACT FABRIC STEAMER Rated Power: 800W
Rated Voltage: AC 120V ~ 60Hz
Water Tank Capacity: 7.8oz (230ml)
Dimension: 6.6*4.3*8.3 in
Model: NB308
Working Time: 15-25 min
Net Weight: 1.63lb (740g)
Specifications
Parts Identification:
1.Steam Head
2.Power Indicator Light
3.Push Button Switch
4.Water Tank
5.Water tank inlet cap
6.Cord exit
7.Handle
8.Fabric Brush
(removable)
9.Reset Button
1
2
3
4
6
9
7
8
5
- 03 -
Note: The unit will turn off automatically when the
water reservoir empties. Don't forget to press the reset button
to resume work after refilling water (Indicator light will be on).

When you first use the steamer, some residual water from the
testing might be emitted from the steam head. This is normal
and will not affect the use of the steamer and will disappear
quickly.
Before the First Use
It is recommended to use de-mineralized or distilled water.
Never use water containing additives (starch, perfume, aromatic
substances, softeners, etc.), or condensation water (for example
water from tumble dryers, water from refrigerators, water from air
conditioning units, rainwater). This water contains organic waste
materials or minerals that concentrate under the effect of heat
and cause spitting, brown coloring or premature ageing of your
steamer.
What Water to Use?
1. Open the water inlet cap.
2. Fill the water tank with water (See
section "what water to use"). Fill up to
the MAX (7.8 oz. / 230 ml) fill line.
Overfilling may result in burns from
spilling water.
Before Use
- 04 -

3. Close the water inlet cap.
1. Plug in the appliance.
Use
- 05 -
Warning: As steam is very hot, never attempt to
remove creases from a garment while it is being worn,
always hang garments on a clothes hanger.
Accessories
The fabric brush allows removing lint, pet hair, dust, dirt and
dander on overcoat and down jacket
To attach: While the brush and steamer are cool, align the
fabric brush to the steam head and lock it into position.
To remove: Allow the steamer to cool prior to removing the
brush.
4. Hang your garment on a
clothes hanger.

2. Slide the power switch upwards to
turn on the appliance with low or
high steam mode.
3. Allow the steamer to preheat so
that the steam will be emitted from
nozzle in 2 minutes.
4. Hold your steamer in a vertical
position, and direct steam nozzle
towards the fabric you wish to steam.
5. For optimal use, move the steam
jets over your garment from top to
bottom
6. Use your free hand to keep the fabric
taut and stretched. Steam the garment
with slow, downward strokes, keeping
the head of the steamer in contact with
the fabric.
- 06 -
Low High
OFF
WEAK
STRONG
OFF
WEAK
STRONG

Auto Off Feature
1) For your safety, the steamer is fitted with an automatic
shut-off feature, which is turned off automatically when the
unit runs out of water.
2) To reactivate the steamer:
a. Refill the water tank after
allowing the unit to cool down for
a few minutes.
b. Press the reset button at the
bottom of the device (then the
light on).
c. Turn on the appliance with low
or high steam mode.
Warning: Never touch the
soleplate of the steamer.
After Use
Warning: Never steam a
garment while it is being worn.
- 07 -
1. Slide the power switch downwards
to turn off the appliance. OFF
WEAK
STRONG

Cleaning
- 08 -
1. Wait half an hour for the appliance
to completely cool down.
2. Clean the plastic parts of the
appliance with a dry cloth or a soft
sponge.
3. Never wash or rinse appliance
directly over a sink.
2. Unplug the appliance.
3. To avoid mineral buildup, empty
the tank after each use.
4. Wait for 30 minutes for your
appliance to cool before storing.
30
min

● Anti-calc operation can be done if you notice your appliance
performance has decreased.
● Do this operation in a vented room.
Steps:
1. Fill the water tank with 0.2oz citric acid (you can also use 50%
water and 50% white vinegar).
2. Let the citric acids solution rest in the unit for 20 minutes.
3. Switch on the appliance.
4. Allow the appliance to run until the water tank has completely
emptied.
5. Fill the water tank with 100% water and repeat the operation
until the water tank is completely empty in order to rinse the
appliance.
Anti Calc
1. Store it in a cool dry place.
2. DO NOT wrap the power cord around the unit, place it loosely.
NOTE: Water containing mineral levels will vary depending on the
place where you live in. To ensure the continuous operation of the
steamer, never store it without cleaning and removing excess
water from the water container or tank.
If you fill your steamer with tap water, you may experience mineral
build-up due to the high mineral content in the water supply in
many cities. Mineral residue inside your steamer’s internal heater
may cause intermittent steaming or, in severe cases no steaming
at all.
To avoid the problem, only use de-mineralized or distilled water in
your steamer. If you are unable to use de-mineralized or distilled
water, we recommend you to follow the cleaning procedure below
at least once a month to help avoid mineral build-up.
Storing Your Newbealer Steamer
- 09 -

● To reduce the risk of contact with hot water coming from steam
vents, check the water level and the indicator light on your
steamer before each use. Use this appliance for its intended use
only.
● To reduce the risk of electric shock, do not immerse your
steamer in water or other liquids.
● Never pull out the cord to disconnect from the outlet, instead,
grasp the plug and pull to disconnect completely before putting it
away. Place the cord loosely when storing.
● Always keep your steamer disconnected from any electrical
outlet when filling it with water, when emptying it, and when it is
not in use.
● Do not operate your steamer when the cord is damaged, or if
the appliance has been dropped or damaged.
● To reduce the risk of electric shock, do not disassemble or
attempt to repair your steamer if damaged. Return it to the
Service Center for repair. An incorrect reassembly or repair could
result into a fire, electric shock, or injury when the appliance is
used.
● Never drop or insert any object into the steam vents of the
nozzle.
● Do not use the steamer outdoors, operate it where aerosol
products are being used or where oxygen is being manipulated.
● The surface of your steamer may get hot when it will be in
use.Always use a handle to avoid burning your skin.
● Do not place the steam nozzle directly on any surface or on
the appliance power cord while it is not or plugged in.
● Unplug your steamer before filling or emptying the water tank.
Never fill water past the maximum level.
● To reduce the risk of a circuit overload, do not operate another
high-voltage appliance on the same circuit.
● Be careful when arranging the cord so it cannot be pulled or
tripped over.
Warning
- 10 -

If your Garment Steamer is not operating properly, please check if
it is related to any of the following problems or conditions. If you
are still unable to detect and solve the problem, please contact us
for help.
Problems
There is no
steam.
Not enough
steam coming
out.
Water leaks.
Water spits.
Steam rate
decreases or
releases particles.
Possible Causes
The steamer is not plugged in,
or not switched on
Check that your steamer is
correctly plugged in and switched
on.
Unplug your steamer and refill it.
Press the reset button to resume
work after refilling water each
time.
Follow the instructions under the
“Before Use” section and fill to
Max level.
Always allow steamer to preheat
2 minutes until steam out.
Ensure that cover is closed.
Fill the water tank to the Max.
level, do not overfill.
Keep the unit in an upright
position.
Before steaming, always allow
steamer to preheat 2 minutes until
steam out.
Fill the water tank to the Max.
level, do not overfill.
After each use, empty the water
tank.
Refer to ‘ANTI CALC’ section in
instructions for use.
Never add any additive in the
water tank.
Read carefully the “What water
to use” section.
Read carefully the ‘ANTI
CALC’ section in instructions
for use.
The water level is too low.
After “Auto-off” you forget to press
the reset button.
There is not enough water in
the water tank.
The steamer is not heated to
full temperature..
The cover is not closed properly.
There water tank is overfilled.
Your steamer was tilted past a
45-degree angle.
The steamer is not heated to
full temperature before use.
There water tank is overfilled.
There is remaining water after last
use which became condensation
water and stored in the steam head.
Calcium build-up.
The steam leaves
stains on the
fabric or the
appliance spits.
You are using water with
additives.
The water is too hard.
The appliance has not been
rinsed enough after the descaling
operation.
Solutions
Troubleshooting
- 11 -

To Steam Garments
1. Place the fabric in a dry and ventilated place and at least 20
cm (8 inches) away from any walls (otherwise moisture may
cause mildew).
2. Empty garment pockets and straighten turn-ups such as cuffs
and hems.
3. Hang the garment from a hanger and stretch the fabric slightly
with one hand, making sure there is nothing behind the fabric
that could be damaged by the steam.
4. Put the steam head against the garment, moving your arm in
an up and down motion, targeting creases on the fabric.
NOTE: Do not steam over metal accessories. Use caution when
steaming around metal accessories.
WARNING: When using the garment steamer, do
not touch the steam head. This garment steamer will
generate a large flow of high-temperature air that can
cause burns if not handled carefully.
To Steam Curtains
1. Wash and dry the curtains.
2. Steam when they are hanging.
3. While steaming, stretch the curtains with one hand to help
remove creases more easily.
To Steam Upholstery
1. The garment steamer can be used to kill bacteria, remove
odors and freshen up furniture upholstery, slipcovers, and
cushions.
2. Move the garment steamer over the fabric, cushions should be
removed for steaming. Allow cushions to dry thoroughly before
placing them back on the furniture.
Steaming Tips
- 12 -

The appliance’s packaging is made from environmentally friendly
material and can be disposed of at your local recycling plant.
Thank you for purchasing your newbealer garment steamer, the
perfect tool to keep your wardrobe and household fabrics fresh
and wrinkle-free. Use it daily to easily and quickly revive all your
clothing. Enjoy a warranty for one year!
If you experience any issues with this product, or its performance
is not what you had expected, please contact us, we would like
to offer a replacement.
Warranty Details
- 13 -