Newport Brass 8081 User manual

INSTALLATION INSTRUCTIONS
BAR FAUCET
Model No's:
8081, 8181, 8781, 8881, 8901, 9081,
9181,9281, 9881, 1008, 1038, 1068,
1078, 1098, 1208, 1608, 1628, 1648,
1668, 1688, 1708, 1728
Congratulations on the purchase
of your Newport Brass product,
an excellent choice, that will give you
years of quality service and enhance
the look and style of your home.

Recommended Installation by a Professional Plumbing Contractor
Note:The use of petroleum base plumbers putty on our products will nullify the warranty.
We recommend the use of clear silicone sealing materials.
1. Drill hole in mounting surface. Recommended deck hole Ø1.25” not to exceed Ø1.50”.
2. Place O-ring on underside of faucet body. See Fig. 1.
3. Insert Hoses and Threaded Rod through hole in mounting surface.Threaded Rod to be ori-
ented to the rear of faucet, toward the wall. See Fig. 1.
4. Place Gasket, Crescent and Nut onto Threaded Rod and tighten with a wrench. See Fig. 1.
5. Attach faucet 1/2 NPT Hoses to Risers and Water Supply Valves (not included). See Fig. 2
6. Turn on Water Supply Valves, remove Aerator and flush faucet of debris.
7. Check for leaks and make any final adjustments. Re-install Aerator when clear water flows
from the faucet.
NWP-8081

Figure 1
Figure 2
Mounting
Nut
Faucet body
Deck hole
Ø1.25”
Cold water
supply
(not included)
O-ring
Cresent
Gasket
Hot water
supply
(not included)
Riser
(not included)
[phone]
NWP-8081 Santa Ana, CA 92705 6/22/2011
www.brasstech.com
3/8” COMPRESSION
OUTLET
9/16-24 UNEF
(FOR 3/8” COMPRESSION
OUTLET )