Nexcom Ndis 164 User manual

NEXCOM International Co., Ltd.

Published February 2010 www.nexcom.com

NEXCOM International Co., Ltd.

Multi-Media Solutions

Digital Signage Platform

NDiS 164

User Manual

Contents

Co n t e n t s

Preface

Disclaimer ............................................................................................. iv

Acknowledgements .............................................................................. iv

Regulatory Compliance Statements ....................................................... iv

Declaration of Conformity...................................................................... iv

RoHS Compliance ................................................................................... v

Warranty and RMA ................................................................................ vi

Safety Information ................................................................................vii

Installation Recommendations................................................................vii

Safety Precautions.................................................................................viii

Technical Support and Assistance........................................................... ix

Conventions Used in this Manual........................................................... ix

Global Service Contact Information......................................................... x

Package Contents..................................................................................xii

Ordering Information ............................................................................xiii

Chapter 1: Product Introduction

Overview ................................................................................................1

Key Features.........................................................................................1

Hardware Specifications..........................................................................2

Main Board (NDiB 164) ........................................................................2

NDiS 164 System ..................................................................................4

Getting to Know NDiS 164 .....................................................................6

Front Panel ...........................................................................................6

Rear Panel ............................................................................................6

Mechanical Dimensions...........................................................................8

Chapter 2: Jumpers And Connectors

Before You Begin ....................................................................................9

Precautions .............................................................................................9

Jumper Settings ....................................................................................10

Locations of the Jumpers and Connectors.............................................11

Jumpers................................................................................................12

Clear CMOS Select ...........................................................................12

Hardware Reset ................................................................................12

Connector Pin Definitions .....................................................................13

External I/O Interface ........................................................................13

HDMI Type A Connector ..............................................................13

Line-out Jacks ..............................................................................13

Dual USB and LAN Ports ..............................................................14

Dual USB Ports.............................................................................14

Serial (RS232) Ports......................................................................15

COM RX/TX Connector................................................................15

DC Power Input ...........................................................................16

Power Switch Button ...................................................................16

Contents

NDiS 164 User Manual

Internal Connectors..........................................................................17

SATA Power Connector................................................................17

SATA DOM Power Connector.......................................................17

uDOC Connector.........................................................................18

IrDA Pin Header ...........................................................................18

SMBus Connector........................................................................19

SATA Ports ...................................................................................19

Fan Connectors ...........................................................................20

SATA Status LED ..........................................................................20

Power Status LED.........................................................................20

Mini-PCIe Slots ............................................................................21

Chapter 3: System Setup

Removing the Chassis Cover ................................................................22

Installing a DIMM..................................................................................24

Installing the CPU .................................................................................26

Installing the uDOC Module..................................................................31

Installing a Wireless LAN Module ..........................................................33

Installing a SATA Hard Drive ..................................................................37

Installing a TV Tuner Module.................................................................43

Appendix A: Video Driver Installation and Settings

Installing the Video Driver .....................................................................47

Appendix B: Audio Driver Installation and Settings

Installing the Audio Driver.....................................................................60

Appendix C: Watchdog Timer

Watchdog Timer ...................................................................................64

Appendix D: Power Consumption

Power Consumption .............................................................................67

Preface

Pr e f a C e

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class A devices

and describes how to keep the system CE compliant.

Declaration of Conformity

FCC

This equipment has been tested and verified to comply with the limits for

a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area (domestic environment) is likely to cause harmful interfer-

ence, in which case the user will be required to correct the interference

(take adequate measures) at their own expense.

The product(s) described in this manual complies with all applicable Euro-

pean Union (CE) directives if it has a CE marking. For computer systems to

remain CE compliant, only CE-compliant parts may be used. Maintaining

CE compliance also requires proper cable and cabling techniques.

This publication, including all photographs, illustrations and software, is

part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written consent from

NEXCOM International Co., Ltd.

Disclaimer

The information in this document is subject to change without prior notice

and does not represent commitment from NEXCOM International Co., Ltd.

However, users may update their knowledge of any product in use by con-

stantly checking its manual posted on our website: http://www.nexcom.

com. NEXCOM shall not be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use of any product, nor for any

infringements upon the rights of third parties, which may result from such

use. Any implied warranties of merchantability or fitness for any particular

purpose is also disclaimed.

Acknowledgements

NDiS 164 is a trademark of NEXCOM International Co., Ltd. All other prod-

uct names mentioned herein are registered trademarks of their respective

owners.

Preface

RoHS Compliance

NEXCOM RoHS Environmental Policy and Status

Update

NEXCOM is a global citizen for building the digital

infrastructure. We are committed to providing green

products and services, which are compliant with Euro-

pean Union RoHS (Restriction on Use of Hazardous Substance in Electronic

Equipment) directive 2002/95/EU, to be your trusted green partner and to

protect our environment.

RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg)

< 0.1% or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent

Chromium (Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB)

< 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1%

or 1,000ppm.

In order to meet the RoHS compliant directives, NEXCOM has established

an engineering and manufacturing task force in to implement the intro-

duction of green products. The task force will ensure that we follow the

standard NEXCOM development procedure and that all the new RoHS

components and new manufacturing processes maintain the highest

industry quality levels for which NEXCOM are renowned.

The model selection criteria will be based on market demand. Vendors and

suppliers will ensure that all designed components will be RoHS compliant.

How to recognize NEXCOM RoHS Products?

For existing products where there are non-RoHS and RoHS versions, the

suffix “(LF)” will be added to the compliant product name.

All new product models launched after January 2006 will be RoHS compli-

ant. They will use the usual NEXCOM naming convention.

Preface

Warranty and RMA

NEXCOM Warranty Period

NEXCOM manufactures products that are new or equivalent to new in

accordance with industry standard. NEXCOM warrants that products will

be free from defect in material and workmanship for 2 years, beginning

on the date of invoice by NEXCOM. HCP series products (Blade Server)

which are manufactured by NEXCOM are covered by a three year warranty

period.

NEXCOM Return Merchandise Authorization (RMA)

Customers shall enclose the “NEXCOM RMA Service Form” with the?

returned packages.

Customers must collect all the information about the problems encoun-?

tered and note anything abnormal or, print out any on-screen messages,

and describe the problems on the “NEXCOM RMA Service Form” for

the RMA number apply process.

Customers can send back the faulty products with or without acces-?

sories (manuals, cable, etc.) and any components from the card, such as

CPU and RAM. If the components were suspected as part of the prob-

lems, please note clearly which components are included. Otherwise,

NEXCOM is not responsible for the devices/parts.

Customers are responsible for the safe packaging of defective products,?

making sure it is durable enough to be resistant against further damage

and deterioration during transportation. In case of damages occurred

during transportation, the repair is treated as “Out of Warranty.”

Any products returned by NEXCOM to other locations besides the cus-?

tomers’ site will bear an extra charge and will be billed to the customer.

Repair Service Charges for Out-of-Warranty Products

NEXCOM will charge for out-of-warranty products in two categories, one

is basic diagnostic fee and another is component (product) fee.

System Level

Component fee: NEXCOM will only charge for main components such?

as SMD chip, BGA chip, etc. Passive components will be repaired for

free, ex: resistor, capacitor.

Items will be replaced with NEXCOM products if the original one cannot?

be repaired. Ex: motherboard, power supply, etc.

Replace with 3rd party products if needed.?

If RMA goods can not be repaired, NEXCOM will return it to the cus-?

tomer without any charge.

Board Level

Component fee: NEXCOM will only charge for main components, such?

as SMD chip, BGA chip, etc. Passive components will be repaired for

free, ex: resistors, capacitors.

If RMA goods can not be repaired, NEXCOM will return it to the cus-?

tomer without any charge.

Preface

Warnings

Read and adhere to all warnings, cautions, and notices in this guide and

the documentation supplied with the chassis, power supply, and accessory

modules. If the instructions for the chassis and power supply are incon-

sistent with these instructions or the instructions for accessory modules,

contact the supplier to find out how you can ensure that your computer

meets safety and regulatory requirements.

Cautions

Electrostatic discharge (ESD) can damage system components. Do the de-

scribed procedures only at an ESD workstation. If no such station is avail-

able, you can provide some ESD protection by wearing an antistatic wrist

strap and attaching it to a metal part of the computer chassis.

Safety Information

Before installing and using the device, note the following precautions:

Read all instructions carefully.

▪

Do not place the unit on an unstable surface, cart, or stand.▪

Follow all warnings and cautions in this manual.▪

When replacing parts, ensure that your service technician uses parts▪

specified by the manufacturer.

Avoid using the system near water, in direct sunlight, or near a heating

▪

device.

The load of the system unit does not solely rely for support from the

▪

rackmounts located on the sides. Firm support from the bottom is highly

necessary in order to provide balance stability.

The computer is provided with a battery-powered real-time clock circuit.

▪

There is a danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the manufactur-

er. Discard used batteries according to the manufacturer’s instructions.

Installation Recommendations

Ensure you have a stable, clean working environment. Dust and dirt can

get into components and cause a malfunction. Use containers to keep

small components separated.

Adequate lighting and proper tools can prevent you from accidentally

damaging the internal components. Most of the procedures that follow

require only a few simple tools, including the following:

A Philips screwdriver•

A flat-tipped screwdriver•

A grounding strap•

An anti-static pad•

Using your fingers can disconnect most of the connections. It is recom-

mended that you do not use needlenose pliers to disconnect connections

as these can damage the soft metal or plastic parts of the connectors.

Preface

Safety Precautions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a

damp cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a stable surface during installation. Dropping

it or letting it fall may cause damage.

7. Do not leave this equipment in either an unconditioned environment

or in a above 40oC storage temperature as this may damage the

equipment.

8. The openings on the enclosure are for air convection to protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

9. Make sure the voltage of the power source is correct before connect-

ing the equipment to the power outlet.

10. Place the power cord in a way so that people will not step on it. Do

not place anything on top of the power cord. Use a power cord that

has been approved for use with the product and that it matches the

voltage and current marked on the product’s electrical range label.

The voltage and current rating of the cord must be greater than the

voltage and current rating marked on the product.

11. All cautions and warnings on the equipment should be noted.

12. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

13. Never pour any liquid into an opening. This may cause fire or electri-

cal shock.

14. Never open the equipment. For safety reasons, the equipment should

be opened only by qualified service personnel.

15. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

16. Do not place heavy objects on the equipment.

17. The unit uses a three-wire ground cable which is equipped with a

third pin to ground the unit and prevent electric shock. Do not defeat

the purpose of this pin. If your outlet does not support this kind of

plug, contact your electrician to replace your obsolete outlet.

18. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTER-

IES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.

19. The computer is provided with CD drives that comply with the ap-

propriate safety standards including IEC 60825.

Preface

Conventions Used in this Manual

CAUTION!

CAUTION!CAUTION!

Warning: Information about certain situations, which if not

observed, can cause personal injury. This will prevent injury to

yourself when performing a task.

Caution: Information to avoid damaging components or losing

data.

Note: Provides additional information to complete a task easily.

Technical Support and Assistance

1. For the most updated information of NEXCOM products, visit NEX-

COM’s website at www.nexcom.com.

2. For technical issues that require contacting our technical support team

or sales representative, please have the following information ready

before calling:

– Product name and serial number

– Detailed information of the peripheral devices

– Detailed information of the installed software (operating system,

version, application software, etc.)

– A complete description of the problem

– The exact wordings of the error messages

Warning!

1. Handling the unit: carry the unit with both hands and handle it with

care.

2. Maintenance: to keep the unit clean, use only approved cleaning prod-

ucts or clean with a dry cloth.

3. CompactFlash: Turn off the unit’s power before inserting or removing a

CompactFlash storage card.

Preface

NDiS 164 User Manual

Headquarters

Taiwan

18F, No. 716, Chung-Cheng Rd. Chung-Ho City,

Taipei County 235, Taiwan, R.O.C.

Tel: +886-2-8228-0606

Fax: +886-2-8228-0501

http://www.nexcom.com.tw

USA

3758 Spinnaker Court Fremont,

CA 94538, USA

Tel: +1-510-656-2248

Fax: +1-510-656-2158

http://www.nexcom.com

France

Z.I. des Amandiers, 17, Rue des entrepreneurs

78420 Carrières sur Seine, France

Tel: +33 (0)1 71 51 10 20

Fax: +33 (0)1 71 51 10 21

http://www.nexcom.eu

Global Service Contact Information

Germany

Leopoldstraße Business Centre, Leopoldstraße 244 80807

Munich, Germany

Tel: +49-89-208039-278

Fax: +49-89-208039-279

http://www.nexcom.eu

Italy

Via Gaudenzio Ferrari 29, 21047 Saronno (VA), Italia

Tel: +39 02 9628 0333

Fax: +39 02 9619 8846

http://www.nexcom.eu

United Kingdom

10 Vincent Avenue, Crownhill Business Centre

Milton Keynes, Buckinghamshire, MK8 0AB

United Kingdom

Tel: +44-1908-267121

Fax: +44-1908-262042

http://www.nexcom.eu

Preface

NDiS 164 User Manual

Japan

9F, Tamachi Hara bldg, 4-11-5,

Shiba Minato-ku Tokyo 108-0014, Japan

Tel: +81-3-5419-7830

Fax: +81-3-5419-7832

http://www.nexcom-jp.com

China-Beijing

Room 301, Block E, Power Creative Building, No. 1

Shangdi East Rd. Haidian Dist., Beijing, 100085, China

Tel: +86-10-5885-6655

Fax: +86-10-5885-1066

http://www.nexcom.cn

China-Shanghai Office

Room 1505, Greenland He Chuang Building,

No. 450 Caoyang Rd. Shanghai, 200063, China

Tel: +86-21-6150-8008

Fax: +86-21-3251-6358

http://www.nexcom.cn

China-Nanjing Office

Hall C, Block 17,TianXingCuiLang,

No. 49 Yunnan North Rd. Nanjing, 210018, China

Tel: +86-25-8315-3486

Fax: +86-25-8315-3489

http://www.nexcom.cn

China-Shenzhen Office

Western Room 708, Block 210, Tairan Industry & Trading Place,

Futian Area, Shenzhen, 518040, China

TEL: +86-755-833 27203

FAX: +86-755-833 27213

http://www.nexcom.cn

Preface

NDiS 164 User Manual

Pa C k a g e Co n t e n t s

Before continuing, verify that the NDiS 164 package that you received is complete. Your package should have all the items listed in the following table.

Item P/N Name Specification Qty

1 60233ATA16X00 SATA CABLE SATA FEMALE 7-PIN 1

2 60233PW102X00 SATA POWER CABLE SATA 15-PIN TO 3022H-04 4-PIN PITCH 5.08mm,

L: 80mm

3 50311F0119X00 I HEAD BOLTS SCREW LONG I 3x12.5 AXISx 8.5mm SCREW x4mm 4

4 6029900037X00 DOW CORNING 340 Silicone Heat Sink Compound (3g ) 1

5 7400060002X00 (N)POWER ADAPTER FSP:FSP060-1AD101C (N09001) 60W 12V/5A MINI DIN 4P 1

6 602DCD0258X00 (N)NDiS 164 CD DRIVER 1

7 5060100019X00 DAMPER INSIDE DIA. KITAGAWA:VB-1209-80BK 6mm/OUTSIDE DIA.12mm H:9mm TPS (BLACK) 4

8 50344C0056X00 COPPER POST 10x5xM3 WITH MALE/FEMALE

(FEMALE)10mmx(MALE)5mmxM3

9 50344C0067X00 COPPER POST LONG FEI:16x5xM3mm(NI) WITH MALE/FEMALE

(FEMALE)16mmx(MALE)5mmxM3

10 50311F0100X00 ROUND HEAD SCREW W/SPRING+FLAT WASHER LONG

FEI:P3x6L

P3x6 iso/SW6x0.5 NI 2

11 6023300227X00 SATA DOM POWER CABLE MOX1.25 2P TO MOX1.25 2P L=50mm 1

12 5043330314X00 FOOT BRACKET 190x24x6mm 2

13 50311F0120X00 ROUND HEAD SCREW LONG S/W PRING+FLAT WASHER P6#

32Tx1/4/SW7x0.8NI

Preface

NDiS 164 User Manual

or d e r i n g in f o r m a t i o n

The following provides ordering information for NDiS 164.

NDiS 164 (P/N: 10W00016400X0)•

- AMD Athlon™ 64 / 64 X2 family processor

- AMD 780E/SB710 chipset

Chapter 1: Product Introduction

Ch a P t e r 1: Pr o d u C t in t r o d u C t i o n

Overview

Key Features

Powerful Digital Signage Player with AMD•

Athlon™ 64 / 64 X2/PhenomII X4 processor

Slim and Compact Design•

AMD 780E/SB710 solution•

2 x HDMI•

2 x Audio•

Dual GbE LAN•

4 x USB•

6 x Serial ports•

1 x 2.5” SATA HDD / SATA DOM•

ATI Radeon HD 3200 GPU•

Front

Rear

Chapter 1: Product Introduction

Hardware Specifications

Main Board (NDiB 164)

Processor

AMD AM2+ socket•

Supports AMD AM2 / Athlon™ 64 / 64 X2 series processor•

AMD embedded processor list (Longevity CPU)•

- Athlon™ 64 X2 4200+, 2.2GHz

- Athlon™ 64 X2 3600+, 1.9GHz

- Athlon™ 64 X2 3400e, 1.8GHz

- Athlon™ 64 3100+, 2.0GHz

- Athlon™ 64 3000+, 1.8GHz

- Athlon™ 64 2600+, 1.6GHz

Chipset

Northbridge: AMD 780E•

Southbridge: AMD SB710•

Main Memory

Two 240-pin DDR2 DIMM sockets•

Supports DDR2 800MHz SDRAM with unbuffered and non-ECC memory•

module up to 4GB

The supported memory capacity will depend on the memory size al-•

located by the OS

Graphics

Graphics chip•

- AMD 780E integrated with ATI Radeon HD3200 based core

HDMI Interface•

AMD 780E integrated with ATI Radeon HD3200 supports:

- HDMI A1: HDMI signal from NB 780E

- HDMI A2: DVI signal from NB 780E

Resolution•

- Wide screen resolution supports up to 1920x1080p

Network

One Realtek 8111C-GR PCI Express Gigabit Ethernet controllers•

- One RJ45 connectors with LED

Supports PXE LAN boot ROM for Ethernet boot up.•

Supports Wake on LAN•

Chapter 1: Product Introduction

Storage

2 SATA ports•

1 SATA 2.5 HDD•

1 SATA DOM•

Audio

IDT 92HD206 8-channel HD AUDIO CODEC•

Supports 2 independent line-out jacks (two stack phone jacks)•

Expansion Slots

One Mini-PCIe slot - supports Wireless LAN module•

One Mini PCIe slot - supports TV tuner module•

I/O Interfaces

IrDA•

- Onboard IrDA pin header (Tx/Rx)

Serial•

- Two COM ports support RS232

- One 2x6 pin Terminal port for 4 RS232 (Tx/Rx)

USB•

- Four USB 2.0 ports

- Two USB ports with Type A double-stack each on Edge I/O

- 2x5 pin-header x1 for USB x2. Supports u-DOC x1.

Edge I/O•

- ATX Power-on button

- Power-on LED (Green)

- Storage LED (Yellow)

- Reserved holes for Wifi antenna, TV tuner antenna

Others•

- One onboard buzzer

- Three 3-pin fan connectors (for CPU, System)

- One 4-pin header SMBus 2.0 controller

- One 2.5” HDD power DC output (Big-4P)

Power Supply

Internal•

- +12V +/-5% DC input

- 4-pin Mini-DIN power jack

- ATX power mode

External adapter•

- +12V DC output 60W

RTC Battery

On chip RTC with battery backup•

RTC tolerance less than 2 sec (24 hours) under 25• oC environment

Chapter 1: Product Introduction

BIOS

AMI system BIOS•

Plug and Play supported•

Advanced Power Management and Advanced Configuration & Power•

Interface

8Mbit flash ROM•

System Management

Monitoring•

- Monitors 4 voltages, 3 temperatures and 3 fan speeds

- 4 voltages (+3.3V, +5V, +12V, Vcore)

- 3 temperatures (CPU and two external temperature sensors)

- 2 fan speeds (CPU and system fans)

Watchdog•

- Watchdog timeout is programmable by software from 1 second to 255

seconds and from 1 minute to 255 minutes

- Tolerance: 15% under room temperature 25°C

NDiS 164 System

Physical Characteristics

Dimensions (W x D x H)•

- 272mm x 195mm x 44mm (1U Height)

Color•

- Black

Mounting•

- Wall mount bracket

Cooling system•

- Main chip’s heat sink and 2 high speed system fans

External I/O

Front I/O•

- One power-on LED (green)

- One HDD LED (yellow)

Rear I/O•

- ATX Power-on switch

- Two HDMI connectors

- Two stack phone-jacks for line-out; total of 2 independent line-out

connectors

- One RJ45 port with LEDs for 10/100/1000Mbps Ethernet

- Two dual-stack USB connectors; total of 4 USB ports

- One dual-stack DB9 connector, total of two RS-232 ports

- One Mini-DIN 4-pin +12V DC-in jack

- Reserved for optional antenna of WiFi

- Reserved for optional antenna of TV

Storage

One 2.5” SATA HDD bay•

Environment

Operating temperature: 0~40°C•

Storage temperature: -20°C~85°C•

Relative humidity (non-condensing): 90%•

Chapter 1: Product Introduction

Vibration

Non-operating (X-Y-Z): Sine vibration (HDD/SSD)

Sine wave vibration test - Acceleration: 1g rms•

- Frequency: 5 – 500 Hz

- Test axis: X,Y,Z axis

- Test time: 10 minutes per axis

- Total test time: 90 minutes

Operating (X-Y-Z): Random vibration (SSD)

Random vibration test (operating) - Acceleration: 2g rms•

- Frequency: 5 – 500 Hz

- Test axis: X,Y,Z axis

- Test time: 1 hour per axis

- Total test time: 3 hours

Operating (X-Y-Z): Random vibration (HDD)

Random vibration test (operating) - Acceleration: 0.3 g rms•

- Frequency: 5 – 500 Hz

- Test axis: X,Y,Z axis

- Test time: 1 hour per axis

- Total test time: 3 hours

Shock

30g peak acceleration (16 msec. duration) - HDD•

Certificate

CE•

FCC Class A•

Chapter 1: Product Introduction

Getting to Know NDiS 164

Power LED

Indicates the power status of the system.

HDD LED

Indicates the status of the hard drive.

Front Panel

Rear Panel

Power LED

HDD LED

12V DC-in

WiFi

antenna

hole

USB

RJ45 LAN

COM

RS232

COM

terminal

port

Power switch

USB

Line-out

HDMI A1

COM

RS232

antenna

hole

HDMI A2

RJ45 LAN

Used to connect the system to a local area network.

TV Antenna Hole

Used to install the TV tuner antenna.

COM

The COM port supports RS232 compatible serial devices.

Wifi Antenna Hole

Used to install the Wifi antenna.

Power Switch

Press to power-on or power-off the system.

Chapter 1: Product Introduction

HDMI A1

Supports HDMI signal from NB 780E. Used to connect digital audio/video

HD display.

HDMI A2

Supports DVI signal from NB 780E. Used to connect digital audio/video HD

display.

Line-out

Used to connect a speaker.

USB

Used to connect USB 2.0/1.1 devices.

COM Terminal Port

Supports 4x RS232 compatible serial devices.

+12V DC Input

Used to plug a DC power cord.

Table of contents

Popular Digital Signage manuals by other brands

Sony

Sony FWD42B2/DS brochure

ViewSonic

ViewSonic EP4602T Specifications

Advantech

Advantech DS-980 user manual

Global Digital Display

Global Digital Display FTDS43BK-T user manual

ViewSonic

ViewSonic EP4203r-2 user guide

LG 88BH7F installation guide

LG XS4G-B Series owner's manual

hanshow

hanshow Nebular Series product manual

LG 55EF5G owner's manual

Newland

Newland NQuire 750 Stingray user guide

LG 55UL3J-E.AEU user guide

LG 55LV77A-5B.AUS owner's manual

LG 49SM5C-BF Service manual

Elo Touch Solutions

Elo Touch Solutions IDS 3201L user guide

LG 88BH7G-B owner's manual

BroadSign

BroadSign Xpress Pro quick start guide

LG 49UH5E quick start guide

LevelOne

LevelOne 53143703 user manual

Nexcom NDiS 164 User manual

Popular Digital Signage manuals by other brands