Nexigo NS32 User manual
WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo NS32 Wireless
Controller! You are now part of an exclusive club: the
NexiGo family! It's our job to make sure you enjoy
your membership. If you have any problems please
contact us at cs@nexigo.com anytime for further
assistance. Make sure to register your purchase at
nexigo.com/warranty within 14 days of the delivery
date to extend your warranty coverage to TWO Years!
From all of us here at NexiGo, we want to welcome
you again to the family. We thank you deeply for
your trust and for your business. We know you'll
love it here. We look forward to serving you again
in the near future.
Yours Sincerely,
The NexiGo Team
CONTACT INFORMATION
Website: www.nexigo.com
Manufacturer: Nexight INC
Email: [email protected]om
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
01
PRODUCT INTRODUCTION
The NexiGo NS32 Switch Controller is an enhanced
Controller for the Switch gaming console. Providing all
of the normal functionality you would expect from an
Switch Pro Controller, the NexiGo NS32 also features a
Turbo button so you can preset your buttons to turbo
fire, making it great for repetitive tasks or games that
require button mashing. Made from a tough ABS
material the NexiGo NS32 is durable and designed to
last. With a six-axis gyroscope and built-in acceleration
functions it has the technology that you need to be
competitive.
PACKAGE INCLUDES
1 x Switch Controller
1 x USB Charging Cable
1 x User Manual
02
PRODUCT OVERVIEW
1 2 34
6
7
10
11
9
8
5
12 14
15
13
16
03
SPECIFICATIONS
Battery Capacity: 600mAh
Charging Voltage: DC 5V 600mA
Playtime: 6 Hours
Connection Method: Wireless or Wired
1. - Button
2. Screenshot Button
3. Home Button
4. + Button
5. RGB Lights
6. X / Y / A / B Buttons
7. Right Joystick / R3
8. Left Joystick / L3
9. D-Pad
10. Player Indicator LEDs
11. R Button
12. ZR Button
13. L Button
14. ZL Button
15. USB Type-C Charging
Interface
16. Pairing Button
17. Turbo Button
17
04
RGB LIGHT SETTING
1. To change the RGB light color press the Turbo
button and click the L3 or R3 key at the same time.
There are seven different colors to choose cyclically.
2. Press the Turbo button and hold the L3 or R3 key
to increase/decrease the brightness of the RGB
lighting cyclically. During this time, holding the Turbo
button for more than 6 seconds will reset any applied
turbo functions. Ensure that you do not hold the
button for more than 6 seconds if you wish to
maintain your turbo settings.
+or
Click the L3 or R3 key
05
3. Press and hold the Turbo button and double click
the L3 or R3 key at the same time to change the light
mode. There are three different modes to choose
from: a breathing light pattern, a colorful flowing
light pattern, and lights off.
+or
Hold the L3 or R3 key
+or
Double click the L3 or R3 key
06
WIRELESS CONNECTION (FOR
SWITCH/ANDROID)
BEFORE FIRST USE
1. Place the Switch console in the dock.
2. Connect the controller to the dock with the
included USB cable.
3. Then unplug the cable from the controller. The
controller will automatically connect with the Switch
console via wireless in 1-2 seconds. We recommend
now calibrating your joystick if this is the first time
you are connecting this device. instructions on how
to do this are located in the FAQ section.
Note: Please ensure that your device is powered on
and has been updated to the latest version before
pairing the controller.
07
WIRELESS PAIRING (SWITCH CONSOLE)
1. Make sure the device you want to pair with is
powered on. From the home menu in the Switch
console select Controllers as shown below.
2. Select Change Grip/Order on the Controllers menu
page as shown below.
USB Charging Cable
08
3. Press and hold both the Y+ Home buttons (or press
and hold Pairing button) for more than two seconds
to enter pairing mode with the Switch console.
2s 2s
+
(or press and hold Pairing button) 2s
09
WIRELESS PAIRING (ANDROID)
1. Make sure the device you want to pair with is
powered on.
2. Press and hold the X+ Home buttons for more
than two seconds to enter pairing mode.
3. Open your Android device, navigate to Settings >
wireless,and then select Gamepad from the list of
options.
4. The Player Indicator LEDs on the controller will flash
indicating that the pairing was successful and then
the appropriate Player Indicator LED will illuminate.
Pairing is now complete.
2s 2s
+
10
TO DISCONNECT
1. While in wireless connection mode, press and hold
the Home button for three seconds. The controller
will unpair from your device.
AFTER FIRST USE
1. Press and hold the Home button for one second to
wake up the controller.
2. After being woken up the controller will automatically
connect to the device it was last paired with.
4. The player indicator LEDs on the controller will
flash indicating that the pairing was successful and
then the appropriate player indicator LEDs will
illuminate. Pairing is now complete.
3s
Disconnected
11
USB WIRED CONNECTION (FOR
SWITCH/PC)
1. Use the provided cable to connect the controller to
your device.
2. There are three different modes for wired
connections. These can be switched between by
pressing and holding the +and -buttons at the same
time for three seconds.
a. DirectInput mode is the default mode for
connecting to a PC. When using this mode the 2nd
and 4th player indicator LEDs will remain
permanently lit indicating this is the active mode.
b. XInput mode is an alternate mode for connecting
to a PC. This mode can be used if you find controller
Note: A PC will provide charging to the controller while
connected, the Switch console will not.
3s 3s
+
a
b
c
12
3. After switching to a wired connection the wireless
connection will automatically disconnect.
4. After unplugging the wired connection the
controller will automatically attempt to reconnect to
the last paired device.
limitations in a game while using the DirectInput
mode. When using this mode the 1st and 4th player
indicator LEDs will remain permanently lit indicating
this is the active mode.
c. Switch mode for connecting with a Switch console.
When using this mode only the player indicator LED
for your controller position will remain permanently
lit indicating this is the active mode.
FACTORY RESET
To reset the controller, press and hold the Home
button for at least ten seconds. The controller will be
powered off and will then reset itself. You need to
re-pair the controller to your devices using the
methods outlined above.
10s
Reset
13
SLEEP FUNCTION
1. The controller will automatically go to sleep if the
wireless connection is unsuccessful after ten seconds.
2. To prolong battery life the controller will
automatically go to sleep after five minutes if no
buttons are pressed.
HOW TO USE TURBO FUNCTION?
Many of the buttons on this controller can be set to
turbo functionality. The buttons capable of using the
turbo function are: A/B/X/Y/R/L/ZL/ZR.
CHARGING INDICATOR
1. The built-in player indicator LEDs will rapidly flash
when the battery is low. Please charge the controller
when you see this signal.
2. If the charge level drops too low the controller will
automatically go into sleep mode to preserve the
battery.
3. The player indicator LEDs will slowly flash while
charging, and when fully charged will remain
illuminated and stop flashing. The lights will turn off
after a few minutes when the controller is fully
charged and is not being used.
14
TURBO FUNCTION TUTORIAL
1. Press the Aand the Turbo button at the same time
and release. The Akey will now be in Turbo mode.
=
+
2. Press the A and the Turbo button at the same time
again to turn off the Turbo mode.
15
TURBO SPEED ADJUSTMENT
1. Press the Turbo button and the -key at the same
time to decrease the turbo speed.
3. Press and hold the Turbo button for five seconds to
clear all turbo settings.
=
+
5s
16
2. Press the Turbo button and the +key at the same
time to increase the turbo speed.
+
+
17
3. Turbo speed can be adjusted in three levels.
4. When adjusting the speed the controller lights will
flash to indicate what the current speed Setting is.
This flashing indicator is slow for the slowest speed
and increases in frequency as the speed of the turbo
increases.
a. Continuous burst at 5 times per second (Fast)
b. Continuous burst at 12 times per second (Faster)
c. Continuous burst at 20 times per second (Fastest)
MOTOR VIBRATION STRENGTH
ADJUSTMENT
1. Press the Turbo button and the Down key at the
same time to decrease the haptic feedback vibration
strength.
+
18
2. Press the Turbo button and the Up key at the same
time to increase the haptic feedback Vibration
strength.
3. The controller motor vibration has four adjustment
levels:
4. After choosing a vibration level the motor will
vibrate at the chosen level for 0.5 seconds to indicate
that choice.
a. 0% - Turns the vibration motors off completely.
This can also be done in settngs for many games.
b. 30% - The lightest setting. This provides minimal
feedback.
c. 75% - The default setting. This setting provides
noticeable feedback.
d. 100% - The maximum setting. This setting
provides significant feedback.
+
19
Table of contents
Other Nexigo Controllers manuals
