Nexo MSUB18 Series User manual

PAGE 1 OF 4
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
VNT-LSTKM1018
DP3386/Rev02 - DI
Stacking Adapter MSUB18 
GEOM10/MSUB15
Contents:
X1
Weight: 1.5 kg / 3.3 lb

PAGE 2 OF 4
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
Dimensions:
Check the way of use by the arrows on the sticker.
Use:
•With GEOM10 (3x GEOM10 max)
Place MNSTKM10 on LSTKM1018.
Set the rear in the slot and push the assembly forward.
Unlock the side rig of MSUB18 and lock with the latches of
LSTKM1018.
Place GEOM10 and adjust the angle with the LinkBar.












  
 



PAGE 3 OF 4
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
•With MSUB15
•Place 2x LSTKM1018 on MSUB18.
•LSTKM1018: OUTWARDS for MSUB15 Stacking.
•Unlock the side Rig and lock with the latches of
LSTKM1018.
•Place the MSUB15.
•Lock MSUB15 on LSTKM1018 with the latches of
MSUB15.

PAGE 4 OF 4
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
•With VNT-BUMPM10 (6x GEOM10 max)
WARNING : It’s mandatory to use VNT-GSTKM10M12L or S
•Place 2x LSTKM1018 on MSUB18.
•LSTKM1018: OUTWARDS for GEOM10 Stacking.
•Unlock the side Rig and lock with the latches of
LSTKM1018.
•Place the VNT-BUMPM10.
•Lock with the quick release pins.
•Place the first GEOM10.
•NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
•Please check the web site nexo-sa.com for the latest update.