Nexotek NT-P100M User manual

NT-P100M Quick Start Guide
Connect the Memory Phone to Your PC
1. Plug the phone into an USB port of your
computer.
2. Window detects the phone as several new
hardware devices and installs necessary drivers
automatically.
3. Wait until all drivers are installed.
 Window may skip this step if the drivers have
een previous installed on your PC,
 Depending on the Window configuration, you may
need to restart your computer after all drivers are
installed.
4. After the installation is completed. select Run the
program on the following screen and click OK.
STEP 1
Knowing Your Memory Phone
Key arrangement

Scroll

LCD Screen

IN

OUT

Dial

Cancel

Numeric eypad

End

“+” for SkypeOut

 Select Ring tone
5. The SkyMagic software is now loaded and the
phone will sound a eep and the following screen
will pop up.
6. Then, the Skype software will start loading. Wait
until the Skype login screen displays.
STEP 1
-
Continue
All software and device drivers are pre-loaded in the
phone’s uilt-in flash memory. No software installation is
needed.
1. Simply plug it into an USB port of a computer.
2. Wait until the computer finishes loading the software.
3. Start using the phone.
 Make sure your computer is connected to the
Internet and is running Window XP or Window 2000
(SP4)
Before You Start

Assign Speed Dial to Contact
1. Right-click on a contact under the Contacts Tab
and select Set Speed Dial.
2. Assign a speed-dial num er to a contact (e.g. 10).
The speed-dial num er can e any num er from 1
to 99.
3. Repeat for each contact you want to assign a
speed dial num er.
 Make a SkypeOut Call
 SkypeOut is a low cost way to make calls to a regular
phone line using Skype. Before you can use this
service, you have to uy SkypeOut credit first from
Skype.com.
1. First, press the “ “ key followed y the phone
num er to call..
2. Enter a phone num er strictly in the following
format
“Country code” + “Area Code” + “Phone Num er”
For example, if you want to make a call to your
friend in Berlin, Germany and his phone num er
is 1234567. You have to enter
+ 49 30 1234567
3. Lastly, press the “ # “ key to make the call
 If you input a wrong num er, press the Cancel
key to delete.
 No matter where you are and where you want to
call, you have to follow this dial format to make
a SkypeOut call.
Check Your Calls History
 To check the incoming call history
When the phone is in idle mode, press the IN key to
scroll the incoming call log.
 To check the outgoing call history
When the phone is in idle mode, press the OUT key
to scroll the outgoing call log.
Select Your Ring Tone
When the phone is in idle mode, keep pressing the “  ”
key until you find your favorite one. There are 10 different
ring tones to select.
Saving Data to Your Memory Phone
Your phone is also a flash memory disk drive. Once it is
connected, it will ecome a disk drive in your computer.
 The drive letter may e different from your system.
You can use it as a regular disk drive and save your data
into it.
 Don’t make any changes to the files and folders
which are pre-installed in the disk drive. If changes
are made, the phone will not function properly.
Create a New Skype Account
 If you already have a Skype account, sign into your
account
1. Click on Don’t have a Skype Name? to open the
create account window.
2. Choose your Skype Name and password. Enter the
required information (denoted y a red asterisk)
and click Sign In.
3. When the following screen comes up, select Allow
this program to use Skype and click OK
4. If these icons are shown on your computer’s
system tray, located on the right hand ottom of the
screen, your phone is ready for use.
Make a Skype Test Call
1. Select Skype Test Call in the Contacts Ta . Click
the green call utton.
2. Follow the voice instructions to test your
installation.
Add Skype Users as Contact
1. Click on the Skype icon to open the Skype
window.
2. Click on the Add Contact utton on Skype window
and follow onscreen instructions to add your
contact.
Calling with Your Memory Phone
 Make a Skype Call
1. Press the Cancel key to open Skype window.
2. Press again to select the Contact ta .
3. Press the Scroll key to select the contact you
want to call.
4. Press the Dial key to make the call.
 Make a Skype Call Using Speed Dial Num er
1. Press the Cancel key to open Skype window.
2. Enter the speed dial num er (e.g. 10), and
press “ # “ key to make the call.
 Receive a Skype Call
When the phone rings, press Dial key to answer or
press End key to refuse the call.
STEP 2
STEP
3
STEP 2
-
Continue
STEP 3
-
Continue