Nexotek NT-P600S User manual

NT-P600S Quick Start Guide
Key functions

Scroll
1. Select a Skype contact from your
contact list
2. Select an entry from your call history
3. Adjust the phone’s speaker volume
while talking

RING
Select your desired ring tone

Skype tabs
Switches between the tabs of your Skype
window on the computer screen

Clear
Clears wrong numbers you may have
entered when dialing a call

Dial
1. Places a call or answers an incoming
call
2. Used for the hold and call waiting
functions

End
Ends a call or refuses an incoming call

Numeral pad

MUTE
Used to mute and un-mute a call while
talking
Install the Skype Software
 Make sure that your computer is connected to the
Internet before starting installation.
1. Insert the SkyMagic CD into your CD-ROM drive.
2. In the SkyMagic window, click Install Skype
Software to open the Skype Web page,
www.skype.com.
3. Download the Skype software from the Web site.
4. Follow the on-screen instructi
ons to install the Skype
software on your computer.
Create a New Skype Account
 If you already have a Skype account, sign in and
proceed to Step 2.
1. Run Skype and click on Don’t have a Skype Name?
to open the Create Account window.
2. Choose your Skype name and password. Enter the
required information (denoted by a red asterisk) and
click Sign In.
Make a Skype Test Call
You must have a microphone and speaker
connected to computer to make the test call.
1. Select Skype Test Call
in the Contacts tab. Click the
green call button.
2. Follow the voice instructions to test Skype.
STEP 1
Install the SkyMagic Software
1. Insert SkyMagic CD into the CD-ROM drive.
2. On the SkyMagic screen, Click on Install SkyMagic
software.
3. Follow the on-screen instructions to install the Skype
software on your computer.
4. When the following screen comes up, select Allow
this program to use Skype and click OK.
STEP 2
Set up your Easy Phone in
three quick steps!
1.
Install the Skype software
2.
Install the SkyMagic
software
3.
Connect the phone to your
PC
Knowing Your Easy Phone









5. If these icons are shown in your computer’s system
tray, the SkyMagic installation has been completed
successfully.
 Make a Skype Call Using Speed Dial
Enter the speed dial number of the contact who you
want to call (e.g. 10) and press the Dial key to make
the call.
 Make a SkypeOut Call
SkypeOut is a low-cost way to make calls to any
phone number in the world using Skype. To use this
service, you have to buy SkypeOut credit from
www.skype.com.
1. Press the + key followed by the phone number.
The phone number must be entered strictly in
the following format:
“Country code” + “Area Code” + “Phone Number”
For example, if you want to make a call to your
friend in Edinburgh, United Kingdom and his
phone number is 1234567890, you enter
+ 44 1234567890
2. Press the Dial key to send the call.
 If you accidentally enter a wrong number while
dialing, press the Cancel key to delete the numbers
you have input.
 Regardless of where you are and the number you
want to call, you have to follow this dialing format to
make a SkypeOut call.
Answer a Skype Call
When the phone rings, press the Dial key
to answer or the
End key to refuse the call.
Mute a Call
Press the MUTE key to mute a call while talking. To un-
mute the call, press the same key once again.
Hold a Call
Press the Dial key to put a call on hold while talking.
Press the same button again to un-hold the call.
Call Waiting
Press the Dial key to take an incoming call while you are
already talking on a current call. To switch back to the
original call, press the Dial key, then the Skype tabs key,
then the Dial key again.
Select Your Ring Tone
Press the RING key to scroll through your ring tones until
you find your favorite one.
Assign Speed Dial Numbers to Your Contacts
1. Right-click on a contact under the Contacts tab and
select Set Speed Dial.
2. Assign a speed dial number to the contact (e.g. 10).
The number can be any integer from 1 to 99.
3. Repeat for each contact for whi
ch you want to assign
a speed dial number.
STEP 2 (continued)
Add Skype Users to Your Contact List
1. Open the Skype window.
2. Click the Add Contact button and follow the on-
screen instructions to add a contact.
Adding a Skype Contact
Assign a Speed Dial Number
Calling with Your Phone
 Make a Skype Call from Your Contact List
1. Press the Dial key to bring up the Skype
window. Press Skype tabs
until you display your
Contacts tab.
2. Press the Scroll keys to select a contact.
3. Press the Dial key to make the call.
 Make a Skype Call from Your Call History
1. Press the Dial key to bring up the Skype
window. Press Skype tabs
until you display your
History tab.
2. Press the Scroll keys to select an entry.
3. Press the Dial key to make the call.
Using the Phone
Using the Phone (continued)
Connect the Phone to Your PC
1. Plug the phone into an open USB port on your PC.
2. Windows detects the phone as new hardware
devices and installs the necessary drivers
automatically.

Windows may skip this step if the drivers have been
previous installed on your PC.
3. When the SkyMagic icon becomes a green phone
against a light green background, the phone is
successfully connected and is ready to use.
STEP 3