Next Porto 653820 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
•We suggest you spend a short time reading through this leaet and then follow the simple step by step instructions.
•Carefully check that you have all parts before beginning assembly.
CARE INSTRUCTIONS
•For general cleaning, periodically dust with a soft cloth.
•Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
•Do not put hot dishes directly on the surfaces of the item.
•Keep ttings out of children's reach and keep children well away from the construction area.
•We recommend that the packaging is used to protect the surfaces during assembly.
•A minimum of 1 persons is required to assemble this product.
•Do not use this item if any structual part is broken or missing.
•All assembly ttings should always be tightened properly. Screws should not be loose because a child can squeeze
parts of the body, or clothing (e.g. strings, necklaces, ribbonsfor babies, dummies, etc.) could get caught. There
could be danger of strangulation.
•Never drag pieces of furniture across the oor as this will cause damage to the joints.
•All assembly xings should always be tightened properly and periodically check all xings and tighten if necessary.
•Do not place very hot or cold items against or in close proximity to the glass surface unless adequately thick
insulation material is used to prevent such items from coming into contact with the glass.
•Do not strike the glass with hard or pointed items.
•Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
the glass.
•Do not sit or stand upon horizontal glass surfaces.
GLASS INFORMATION
•
This item contains glass. Please handle with extreme care.
•
Batch No. 152615 / 26 / 08 of manufacture
•If the glass is chipped or broken, stop using the product and consult the manufacturer or supplier.
•This product contains toughened glass of a nominal thickness of 6mm conforming to BS 6206 class A. If a glass
component is chipped or broken replace with the glass as decribed.
Porto 653820
Page 1 of 4

Attach part 3 (x3) into part 1 and part 2 .
FITTINGS
PARTS
STEP ONE
Page 2 of 4

Insert bolt( A)( x12) into the holes as shown.,Tighten
with allen key (C)
Turn over the assembled unit and place on a flat
surface
Insert PVC suckers( B)( (x3) as shown
STEP TWO
STEP THREE
STEP FOUR
Page 3 of 4

Place the glass top(4) on to a protective surface,Such as
the box. Align the PVC sockers with 3 pads and connect
together.
Carefully turn the table upright
STEP FIVE
STEP SIX
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 4 of 4