Nikon COOLPIX AW100 User manual

DIGITAL CAMERA
COOLPI/_ 100
Reference Manual

The Shooting Menu (a (Auto) Mode)
Using Preset Manual
Use when white balance setting (Auto, Incandescent, etc.) may not produce the
desired results, such aswhen shooting under unusual lighting conditions (e.g.,
when you want to make pictures taken under lamps with reddish-light look as
though they were shot in normal light).
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1Place a white or gray reference object under the lighting that will be
used during shooting.
2Display the shooting menu ([_51), use the
multi selector to set White balance to
FEEPreset manual, then press the _ button.
• The lensextendsto the zoom positionfor
measurement.
3Choose Measure.
• To apply the most recently measured white balance
value, select Cancel and press the _) button. The most
recently measured white balance value will be set.
4Frame a white or gray reference object in the
reference object frame.
Reference object fra
5Press the _}_ button to measure the white balance value.
• Theshutter isreleasedandthe newwhite balancepresetvalueisset(no picture is
recorded).
Note on Preset Manual
The camera cannot measure a white balance value _r when the flash fires, When shooting with the
flash, set White balance to Auto or Flash.
_35

TheShootingMenu(a(Auto)Mode)
m
o
Continuous Shooting
Display the shooting screen in I_1 (Auto) mode (_51) _' MENUbutton _' I_1tab (_11)_' Continuous
Change the settings for continuous shooting and BSS (Best %ot Selector).
Option Description
Single (default
[] setting) One picture is shot each time the shutter-release button is pressed.
While the shutter-release button is pressed all the way, images are
captured continuously at a rate of about 7.1 frames per second
Continuous H when the image mode is _ 4608x3456). Shooting ends when
the shutter-release button is released, or three pictures have been
taken continuously.
While the shutter-release button is pressed all the way, about
Continuous L 12 pictures are captured continuously at a rate of about 1.4frames
)er second (when the image mode is [r_ 4608x3456).
BSSisrecommended for shooting under low lighting without the
flash, with the camera at telephoto zoom position, or in other
BSS(Best Shot situations in which camera shake is likely to blur pictures.
B_S Selector) The camera takes up to ten images while the shutter-release button
ispressed all the way. The sharpest image (image with the most
details) in the series is automatically selected and saved.
Eachtime the shutter-release button is pressed
all the way, the camera shoots 16 pictures at a
rate of about 30 frames per second and arranges
Multi-shot 16 them in a single picture.
• The image mode is fixed at [] (2560 × 1920
pixels).
• The digital zoom is not available.
The icon for the current setting other than Single isdisplayed on the monitor (_6).
_1_ Notes on Continuous Shooting
• Focus,exposure and white balance are fixed at the values for the first picture in each series.
• The frame rate may become slower depending on the image mode, memory card type or
shooting conditions.
• This feature may not be used in combination with certain features. See"FeaturesThat Cannot Be
UsedSimultaneously" (_63) for more information.
_I_ Note on Best Shot Selector
BSSis suited for shooting stationary subjects. BSSmay not produce the desired results ifthe subject
moves or the composition changes.
_I_ Note on Multi-shot 16
Banding or variance in brightness or hue may occur in images that were captured under lighting
that flickers at high speeds, such as fluorescent, mercury vapor, or sodium vapor lighting,

The Shooting Menu (a (Auto) Mode)
ISO Sensitivity
Display the shooting screen in I_1 (Auto) mode (_]51 ) -) MENUbutton -') I_1 tab (_ 1] )
-)' ISO sensitivity
The higher the ISO sensitivity, the less light needed for taking pictures.
The higher the ISO sensitivity, the darker the subject that can be shot. Additionally,
even with subjects of similar brightness, pictures can be taken at faster shutter
speeds, and bhrring caused by camera shake and subject movement can be
red uced.
• Setting the ISO sensitivity to a high level is effective when shooting dark
subjects, not using the flash, shooting at the telephoto zoom position and
similar situations, but the pictures taken may be slightly grainy.
Option " Description
Sensitivity is ISO 125when there issufficient lighting; the camera
Auto (default setting) compensates by raising sensitivity to a maximum of ISO800
when lighting is dim.
Sensitivity is]SO ] 25 400 when the camera automatically adjusts
ISOsensitivity. ISO sensitivity does not exceed the maximum
Fixed range auto value.
Setthe maximum value for ISO sensitivity for effective control
over the amount of "grain" that appears in images.
125, 200, 400, 800, ISOsensitivity is locked at the specified value.
1600, 3200
The icon for the ISO sensitivity setting is displayed on the monitor (_6).
• When Auto is selected, the _ icon is not displayed at ISO 125, but is displayed
if the ISO sensitivity automatically increases to more than 125 (_28).
• When Fixed range auto is selected, _ icon and the maximum value for ISO
sensitivity are displayed.
4"
_1_ Note on ISO Sensitivity Settings
Thisfeature may not be used in combination with certain features. See"Features That Cannot Be
Used Simultaneously" (_63) for more information.
_-B37

m
o
The Shooting Menu (a (Auto) Mode)
AF Area Mode
Display the shooting screen in I_1 (Auto) mode ([_51 ) -) MENUbutton -_ I_1 tab (_ 11 )
-) AF area mode
You can set how the camera selects the focus area for autofocus.
............ 8"
Option Description
The camera detects and focuses on Q
a face (see "Using Face Detection"
([_65) for more information).
If more than one face isdetected,
the camera focuses on the face
Face priority closest to the camera.
f-Q] (default When non-human subjects are
setting) photographed, or a subject with
which no face can be detected is Focus area
framed, AF area mode is set to
Auto. The camera automatically selects the focus area (up to nine
[m] Auto
The camera automatically selects
the focus area (up to nine areas)
containing the subject closest to
the camera.
Press the shutter-release button
halfway to activate the focus area.
When the shutter-release button is
pressed halfway, the focus area
selected by the camera is
displayed on the monitor (up to
nine areas).
Focus areas
_'638

TheShootingMenu(a(Auto)Mode)
Option " Description
Choose manually fl_e focus position
fromgareas,nthescreen.Th,s
option is suited to situations in
which the intended subject is
relatively still and not positioned at
the center of the frame.
Press the multi selector A, V, • or
• to select one of 99 focus areas
[c_] Manual displayed on the monitor's focus- Focus area
Selectable areas
area selection screen, and shoot.
• To adjust the following settings, press the _) button to
temporarily cancel focus area selection, and then adjust each
setting.
- Flash mode, macro mode or self-timer
- Exposure compensation
To return to the focus area selection screen, press the _)
button again.
[-] Center
Subject
tracking
The camera focuses on the subject
at the center of the frame.
The focus area is always displayed
at the center of the frame.
DE3 _1
2®_JCs I
Focus area
Subject tracking begins once you
select asubject to be focused on,
and the focus area will move and
follow the subject. See "Subject
Tracking Mode (Focusing on a
Moving Subject)" (_I640).
_1_ Notes on AF Area Mode
•When the digital zoom is in effect, the camera _cuses on the su_ect at the center of the frame
regardlessof the applied AF area mode option.
• in some rare casesof shooting subjects for which autofocus does not perform asexpected (_31),
the subject may not be in focus.
• This feature may not be used in combination with certain features. See"FeaturesThat Cannot Be
UsedSimultaneously" (_63) for more information. _639

The Shooting Menu (a (Auto) Mode)
Subject Tracking Mode (Focusing on a Moving Subject)
Display the shooting screen in I_1 (Auto) mode (_]51 ) -)' MENUbutton -')' I_1 tab (_ 11 )
-)' AF area mode
Choose this mode to shoot moving subjects. Subject tracking begins once you
select a subject to be focused on, and the focus area will move and follow the
subject.
1Use the multi selector to select _E] Subject
tracking and press the _ button.
• The camera enters subject tracking mode, and a white
border is displayed at the center of the frame.
P_
m
o
again.
• Once the subject is registered, it is framed by a yellow
focus area display, and subject tracking begins.
• Pressthe _) button to cancel the registration of the
subject.
• If the camera loses sight of the subject, the focus area
display disappears; register the subject again.
the focus area is not displayed, the camera focuses on
the subject at the center of the frame.
_40

TheShootingMenu(a(Auto)Mode)
_1_ Notes on Subject Tracking
• The digital zoom is not available.
• Set the zoom position, flash mode, or menu settings before registering a subject. If any of these are
changed after a subject is registered, the subject will be canceled.
• During certain conditions, such as when the subject is moving quickly, when there is a large
amount of camera shake, or when there are multiple subjects that look alike, the camera may not
be able to register or track a subject, or the camera may track a different subject. Additionally, the
subject may not be tracked properly depending on factors such as the subject's size and
brightness.
• In some rare cases of shooting subjects for which autofocus does not perform asexpected (_3 ]),
the subject may not be in focus despite the fact that the focus area lights in green. If you cannot
focus, change the AF area mode setting to Manual or Center, or try shooting with focus lock
(_67) by refocusing on another subject at the same distance.
• This feature may not be used in combination with certain features. See "Features That Cannot Be
Used Simultaneously" (_63) for more information,
Autofocus Mode
Display the shooting screen in I_1 (Auto) mode ([_]51 ) -)' MENUbutton ")' I_1 tab (_ 11 )-)' Autofocus mode
C_hoosehow the camerafocuses.
Option Description
Single AF The camera focuses only when the shutter-release button is
AF-S (default
setting) Dressed halfway.
The camera focuses continuously until the shutter-release button
AF-F Full-time AF is pressed down halfway. Use with moving subjects. A sound will
be heard while the camera focuses.
8
t_
_1_ Note on AF mode
This feature may not be used in combination with certain features. See "Features That Cannot Be
Used Simultaneously" (_63) for more information.
[] Autofocus Mode for Movie Recording
Autofocus mode for movie recording can be set with Autofocus mode (_56) in the movie menu.
_41

See "Editing Images (Still Pictures)" (_15) for the function of editing features
(Quick retouch, D-Lighting Glamour retouch, Filter effects, Small picture).
Print Order (Creating a DPOF Print Order)
Press the [] button mode) ") MENUbutton (_11 -) _1,Print order
(Playback )
If you choose to use one of the following methods to print pictures that are stored
on a memory card, the pictures to print and the number of copies can be set in
advance on the memory card.
• Printing with a DPOF-compatible (_5723) printer that is equipped with a card
slot.
• Ordering the prints from a digital photo lab that has a DPOF service.
• Printing by connecting the camera to a PictBridge-compatible (_5723) printer
(_24). (When the memory card is removed from the camera, the print orders
can also be performed for the pictures stored on the internal memory.)
1 Use the multi selector to choose Select
images and press the _) button.
• When favorite pictures mode (_9), auto sort mode
(_12) or list by date mode (_14) isselected, the
menu shown on the right is not displayed.
Proceed to the step 2.
2Choose the pictures (up to a maximum of 99)
and number of copies (up to nine per picture).
• Pressthe multi selector _1 or • to choose the pictures,
o and press • or • to set the number of copies for each.
• Pictures selected for printing can be recognized by the
check mark icon and the numeral indicating the
number of copies to be printed. If no copies have been
specified for images, the selection iscanceled.
• Pressthe zoom button T(% to switch to full-frame playback mode or W(_;_) to
display 12 thumbnails.
• Pressthe _) button when setting is complete.
_42

The Playback Menu
3Choose whether or not to also print shooting
date and shooting information.
• Choose Date and press the _) button to print the
shooting date on all pictures in the print order.
• Choose Info and press the _) button to print shooting
information (shutter speed and aperture value) on all
pictures in the print order.
• Choose Done and press the _) button to complete the
print order.
Pictures selected for printing are recognized by the _ i5_5®
icon displayed in playbac:k mode.
_1_ Notes on Printing Shooting Date and Shooting Information
When the Date and Info options are enabled in the print order menu, shooting date and shooting
information are printed on pictures when a DPOF compatible (_):-23) printer which supports printing
of shooting date and shooting information is used.
• Shooting information cannot be printed when the camera is connected directly to a printer, via the
included USB cable, for DPOF printing (_29).
•Date and Info are reset each time the Print order menu is displayed.
• The date and time printed on the picture is the date and time
recorded on the camera when the picture was taken.The date and
time printed using this option are not affected if the camera's Time
zone and date setting is changed from the setup menu after the
pictures are taken.
4"
8
_43

The Playback Menu
1_4 Notes on Print order
When a print order is created in favorite pictures mode, auto sort mode, or list by date mode, the
screen shown below is displayed if pictures other than those in the selected album, category, or
shooting date have been marked _r printing.
•Select Yes to add the print order setting to the existing print order,
• Select No to remove the existing print order and restrict the print order setting.
Favorite pictures mode
or auto sort mode List by date mode
Additionally, if there are more than 99 pictures as a result of adding the current print order settings,
the screen shown below will be displayed.
• Select Yes to remove the existing print order and restrict the print order setting,
• Select Cancel to retain the existing print order and remove the print order setting,
8
n
Favorite pictures mode
or auto sort mode List by date mode
[] Deleting All Print Orders
In step ] of the print order procedure (_42), choose Delete print order and press the _) button
to delete the print orders for all pictures,
[] Print Date
The shooting date and time can be imprinted in pictures at the time of shooting by using Print
date (_'572) in the setup menu, This infom]ation car/be printed even from printers that do not
support printing of the date and time. Only the date and time of print date on the pictures are
printed, even if Print order is enabled with the date selected in the print order screen.
_44

The Playback Menu
Slide Show
Press the [] button (Playback mode) -) MENUbutton (_11 ) -) _ Slide show
View pic:tures stored in the internal memory or on a memory card in an automatic
slide show.
1 Use the multi selector to choose Start and
press the _) button.
•Before selecting Start, select the following options and
press the _) button to change the setting.
-Effects: Select the effect for a slide show from
Classic (default setting) or Zoom.
-Background music: Select BGM from On/Off
(default setting).
-Frame intvl: Select Manual advance only or display time of an image.
• To repeat the slide show automatically, enable Loop and press the _) button before
choosing Start.The check mark (q_') isadded to the loop option when enabled.
2The slide show begins.
• Pressthe mufti selector i_ to display the next picture, or
41 to display the previous picture. Pressand hold • to
fast forward, or 41 to rewind.
• When Background music is set, press the zoom
button T or Wto adjust the volume.
• To exit partway or pause, press the _) button.
3Choose End or Restart.
• When exiting or pausing the slide show, the screen
shown on the right is displayed. Choose aand press
the _) button to return to step 1.Choose ato play
the slide show again.
4"
Notes on Slide Shows
• Only the first frame of movies (_84) included in slide shows isdisplayed.
• Forsequences (_'_51) whose sequence display options are set to Key picture only, only the key
picture isdisplayed.
• Pictures recorded with easy panorama are displayed in full frame playback mode when played in
a slide show. They do not scroll.
• Slide shows play for a maximum of 30 minutes, even when Loop isselected (_'_77). _45

The Playback Menu
Oe Protect
Press the[] button (Playbackmode) "_ MENUbutton (_I I) -_ 011Protect
Protect selected pictures from accidental deletion.
In the picture selection screen, choose a picture and set or cancel protection. See
"The Image Selection Screen" (_47) for more information.
Note, however, that formatting the camera's internal memory or the memory card
permanently erases the protected files (_'_78).
Protected pictures are recognized by the @z icon in playback mode (_8).
P_
m
o
_46

The Playback Menu
The Image Selection Screen
Tile image selection screen is displayed in tile following menus.
Only one image can be selected for some menu items, while for other menu items,
multiple images can be selected.
Functions for which only one image can be Functions for which mult pie images can be
selected " Selected
•Playback menu:
Rotate image (_48),
Choose key picture (_51)
• getup menu:
Select an image in Welcome screen
(_66)
Playback menu:
Select images in Print order (_42)
Protect (_46),
Selected images in Copy (_50)
Favorite pictures (_9),
Remove from favorites (_1 O)
Erase selected images in Deleting
unnecessary images (_34)
Follow the procedure described below to select images.
1 Press the multi selector _ or i_ to choose the
desired image.
• Pressthe zoom button T (% to switch to full frame
playback mode or W([]) to switch to 12 thumbnails
• For functions for which only one image isselected,
proceed to step 3
2Press • or • to select or deselect (or the
number of copies).
• When an image is selected, a check mark (_) is
displayed with the image. Repeat steps 1and 2 to select
additional images.
3Press the _) button to apply the image selection.
• With selections such as Selected images, the confirmation dialog is displayed. Follow
the instructions on the screen.
_47

The Playback Menu
_] Rotate Image
Press the[] button (Playbackmode) -) MENUbutton (_11 ) -) _L_Rotateimage
Change the orientation of pictures played back in the camera's monitor after
shooting. Still pictures can be rotated 90°clockwise or counterclockwise.
Pictures that were recorded in the "tall" orientation can be rotated up to 180°in
either direction.
Select a picture in the picture selection screen (_47) to display the rotate image
screen. Pressthe multi selector _ or i_ to rotate the picture 90°.
Pressthe _) button to set the orientation displayed and savethe orientation data
with the picture.
m
o
_1_ Rotating Images in aSequence
Whilethekey picture ofasequenceisdisplayed, imagescannotberotated,Apply the setting after
displaying individual images (_7, _51),
_48

The Playback Menu
_1Voice Memo
Press the [] button (Playback mode) -) MENUbutton (_11 ) -) _ Voice memo
Use the camera's microphone to record voice memos for pictures.
• The recording screen isdisplayed for a picture without voice memo, while the voice memo
playback screen is displayed for a picture with voice memo (a picture marked with _] in
full-frame playback mode).
Recording Voice Memos
• Recording ends after about 20 seconds or when the _)
button is released.
• Do not touch the microphone during recording.
• During recording, r_ and _] blink on the monitor.
• When recording ends, the voice memo playback screen is
displayed.
Playing Voice Memos
Pictures for which w_ice memos have been recorded are IDI
indicated by _ in full-frame playback mode.
• Press the _) button to play back a voice memo. To end
playback, press the _) button again.
• Press the zoom button T or W during playback to adjust
playback volume.
• Press the multi selector _1 before or after playing a voice
memo to return to the playback menu. Press the MENU
button to exit the playback menu.
Deleting Voice Memos
Pressthe _ button on the voice memo playback screen, t,",_
Pressthe multi selector • or • to select Yes and press
the _) button to delete only the voice memo.
wNotes on Voice Memos
• Whenapicture with avoicememo attached isdeleted, both the picture anditsvoicememo aredeleted.
• Voice memos cannot be recorded for a picture that already hasa voice memo attached on it. The
current voice memo must be deleted before a new voice memo can be recorded.
• COOLPIXAWIO0 is not able to record a voice memo for a picture taken with cameras other than
COOLPIXAWl 00.
• Voice memos cannot be deleted for a picture in Protect (_'B46).
[] More Information
See"Fileand Folder Names" (_'B85) for more irfformation.
_49

The Playback Menu
m
o
E'3Copy (Copy Between Internal Memory and Memory
Card)
Press the [] button (Playback mode) -) MENUbutton (_11 ) -) C_ Copy
Copy pictures between the internal memory and a memory card.
1 Use the multi selector to select an option from
the copy screen and press the _) button.
• I_1_1_]: Copy pictures from the internal memoryto
the memory card.
• _ _1_1: Copy pictures from the memory card to the
internal memory.
2Select a copy option and press the _) button.
•Selected images: Copy pictures selected from the
image selection screen (_47). ]fa sequence for which
only a key picture is displayed is selected (_7), all
pictures in the displayed sequence are copied.
•All images: Copy all pictures. [fa picture in a sequence
is selected, this option is not displayed.
• Current sequence:This option is displayed when a picture in a sequence has been
selected before displaying the playback menu. All pictures in the current sequence are
copied.
_1_ Notes on Copying Pictures
•JPEG, MOV, and VVAVformat files can be copied. Filesrecorded in any other format cannot be
copied,
• "Voice Memo" (_'B4g) attached to pictures and Protect setting (_'_46) arealso copied with the
pictures.
• Pictures recorded with another make or model of camera or that have been modified on a
computer cannot be copied.
• Print order settings(_42) and the contents of the album (_'_9) are not copied with the pictures.
• Pictures or movies copied from the internal memory or a memory card cannot be displayed in auto
sort mode (_'B12).
• If Sequence display options (_'_51) isset to Key picture only and a pictu re in the sequence is
selected and the _) button ispressed to display individual pictures (_7), only ILl_1_1 (memory
card to internal memory) image copy isavailable.
_-BSO

The Playback Menu
[] Message: "Memory contains no images."
If there are no pictures stored on the memory card when playback mode is selected, the message,
Memory contains no images., isdisplayed, Press the MENUbutton to display the copy option screen,
and copy the pictures stored in the camera's internal memory to the memory card.
[] More Information
See "File and Folder Names" (_'_85) for more information.
Sequence Display Options
Press the [] button (Playback mode) -) MENUbutton (_11 ) -) _ Sequence display
options
Choose the method used to display a series of pictures shot continuously
(sequence, _7) when viewing them in full-frame playback mode (_32) or in
thumbnail playback mode (_33).
Settings are applied to all sequences, and tile setting is saved in tile camera's
memory even if the camera is turned off.
Choose Key Picture
Press the [] button (Playback mode)"_ MENUbutton (_11)-_ _ Choose key picture
When Sequence display options is set to Key picture only, the key picture
displayed in full-frame playback mode (_32) or thumbnail playback mode
(_33) can be set for each sequence of pictures.
•When changing this setting, before pressing MENU,first select the desired
sequence using full-frame playback mode or thumbnail playback mode.
• When the key picture selection screen is displayed, select a picture. See "The
Image Selection Screen" (_47) for more information.
4"
t_
5"

g
b_
o
Movie Options
screen ") MENU button ") _ (Movie) tab (_]I 1)-)' Movie options
You (:an choose the type of movie to shoot.
The camera can record normal speed movies and HS(high speed) movies (_54),
which can be played back in slow motion or fast motion.
The larger the image size and bit rate, the higher the image quality; however, the
file size also becomes larger.
Normal Speed Movies
Option :
_ HD I080p*
(1920x1080)
(default setting)
1_] HD 1080p (1920x1080)
_'_ HD 720p (1280x720)
,_I_' iFrame 540 (960×540)
v'_ VGA (640x480)
Description ::
Movies with an aspect ratio of 16:9 are recorded.
Movie bitrate: 14 Mbps
Frame rate: 30 frames per second
Movies with an aspect ratio of ]6:9 are recorded.
Movie bitrate: 12 Mbps
Frame rate: 30 frames per second
Movies with an aspect ratio of 16:9 are recorded.
• Movie bitrate: 9 Mbps
•Frame rate: 30 frames per second
Movies with an aspect ratio of 16:9 are recorded.
it isone of the formats supported by Apple inc.
•Movie bitrate: 24 Mbps
• Frame rate: 30 frames per second
When using the camera's internal memory for recording,
the movie iecording may end unexpectedly depending on
the composition of the image. Using a memory card (Class
6 or higher) is recommended when taking important
movies.
Movies with an aspect ratio of 4:3 are recorded.
Movie bitrate: 3 Mbps
Frame rate: 30 frames per second
Note on ,,:_ iFrame 540 (960x540)
The movie editing functions cannot be used,
[] More Information
See"Maximum Movie Length" (_82) for more information.
_-B52

The Movie Menu
HS Movies
See "Recording Movies in Slow Motion and Fast Motion (HS Movie)" (_54) for
more information.
option " Description
av_[_ HS 240 fps (320x240)
1/8-speed slow motion movies with an aspect ratio of 4:3 are
recorded.
Max. movie length*: 10 s (playback time: 1 min 20 s)
Movie bitrate: 640 kbps
Frame rate: 240 frames per second
1/4-speed slow motion movies with an aspect ratio of 4:3 are
recorded.
Max. movie length*: 15 s (playback time: 1 min)
Movie bitrate: 3 Mbps
Frame rate: 120 frames per second
1/2-speed slow motion movies with an aspect ratio of 16:9
are recorded.
7"_ HS 60 fps (1280x720) Max. movie length*: 30 s (playback time: 1 min)
Movie bitrate: 9Mbps
Frame rate: 60 frames per second
2x speed fast motion movies with an aspect ratio of 16:9 are
recorded.
l'_l HS 15 fps (1920xl 080) Max. movie length*: 2 min (playback time: 1 min)
Movie bitrate: 14 Mbps
Frame rate: 15 frames per second
* The maximum recording time refersonly to the section shot for slow motion or fastmotion playback.
• The movie bitrate isthe volume of movie data recorded per second. Asa variable bitrate (VBR)
system has been adopted, the movie recording rate variesautomatically according to the subject
sothat more data isrecorded per second for movies containing frequently moving subjects, thus
increasing movie file size.
_'_i_ HS 120 fps (640x480)
Open with HS Footage
Display the shooting screen -> MENUbutton -> ,1_1(Movie)tab ([_11) -) Open with HSfootage
Select whether or not to record slow motion or fast motion movies from the start
of the recording when HS movies are recorded.
S"
s
t_
5"
D