Nikon D7000 User manual

LEARN
PHOTOGRAPHY
COMPANY
C A M E R A G U I D E : N I K O N D 7 0 0 0

TABLE OF CONTENTS
Mode .............................................................................................................................................. 3
Aperture Setting / F-stop.......................................................................................................... 4
ISO .................................................................................................................................................. 5
Focus Mode ................................................................................................................................. 6
Focus Point .................................................................................................................................. 7
Continuous Shooting ................................................................................................................ 8
Self-Timer ................................................................................................................................... 9
Metering ...................................................................................................................................... 10
Exposure Compensation ....................................................................................................... 11
White Balancing ........................................................................................................................ 12

MODE
Page 3

APERTURE SETTING / F-STOP
Rotate the mode dial to A.
Rotate the Command Dial to
adjust the aperture.
Page 4

Press the MENU button and select ISO sensitivity
settings in the shooting menu. Highlight ISO sensitivity
control and press .
ISO
HighlightOn and press OK.
Page 5
Adjust settings and press OK to exit.

To select the autofocus mode, press the AF-
mode button and rotate the main command
dial until the desired setting is displayed in
the viewfinder or control panel.
FOCUS MODE
- Camera auto selects for stationary or moving subject
- For stationary subjects.
- For moving subjects.
- Focus manually.
Page 6

FOCUS POINT
Rotate the focus selector lock to the dot. Use the multi
selector to select the focus point in the viewfinder while
the exposure meters are on.
Page 7

CONTINUOUS SHOOTING
To take pictures in CH (continuous high speed) or
CL (continuous low speed), press the release mode
dial lock release and turn the release mode dial to
CH or CL.
Frame a photograph, focus, and shoot.
Page 8

SELF-TIMER
Press the release mode dial lock release
and rotate the release mode dial to .
Press the shutter-release button halfway to focus, and then press the button the
rest of the way down to start the self-timer (the timer will not start if the camera
cannot focus). The self-timer lamp will start to blink. Two seconds before the
photography is taken, then self-timer lamp will stop blinking. The shutter will be
released ten seconds after the timer starts.
Page 9

METERING
To choose a metering option, press the button
and rotate the main command dial until the desired
setting is displayed in the control panel.
- Matrix - Center-weighted - Spot
Page 10

EXPOSURE COMPENSATION
To choose a value to exposure compensation, press
the button and rotate the main command dial
until the desired value is displayed in the control panel
or viewfinder.
Normal exposure can be restored by setting exposure
compensation to . Exposure compensation is not
reset when the camera is turned off.
Page 11

WHITE BALANCING
White balance is set by pressing the WB button
and rotating the main command dial until the
desired setting is displayed in the control panel.
Page 12