Nikon COOLSHOT 20 User manual

Pt
En
Fr
Es
Instruction manual/Manual de instrucciones/
Manuel d’utilisation/Manual de instruções

English ......................................... p. 4-18
Español ...................................... p. 19-33
Français ...................................... p. 34-48
Português brasileiro ................. p. 49-63

4 5
En
Fr
Es
Pt
En
Fr
Es
Pt
CONTENTS
English
Cautions before use
Thank you for purchasing the Nikon Laser Rangefinder COOLSHOT 20.
〇Before using this product, read thoroughly the “Cautions before use”and instructions on correct
usage in this instruction manual (this manual).
〇Keep this manual within reach for easy reference.
〇Do not disassemble or repair this product by yourself, this may result in a serious problem.
A product that has been disassembled or repaired is not guaranteed by the manufacturer.
●Specifications and design are subject to change without notice.
●No reproduction in any form of this manual, in whole or in part (except for brief quotation in
critical articles or reviews), may be made without written authorization from NIKON VISION CO.,
LTD.
●NIKON VISION CO., LTD. reserves the right to change the contents described in these manuals at
any time and without prior notice.
Cautions before use ........................................ 5-8
Key features ........................................................... 9
Nomenclature/Composition ......................... 10
Inserting and Changing battery .................. 11
Internal display ................................................... 12
Measurement ...................................................... 13
Target priority mode/Disance display units/
Others..................................................................... 14
Specifications ............................................... 15-16
Troubleshooting/Repair ........................... 17-18

6 7
En
Fr
Es
Pt
En
Fr
Es
Pt
Please observe the following
guidelines strictly so you can use
the equipment properly and
avoid potentially hazardous
problems. Before using this
product, read thoroughly the
“Cautions before use” and
instructions on correct usage
accompanying the product.
Keep this manual within reach
for easy reference.
WARNING
This indication alerts you to the fact
that any improper use ignoring the
contents described herein can result
in potential death or serious injury.
CAUTION
This indication alerts you to the fact
that any improper use ignoring the
contents described herein can result
in potential injury or material loss.
SAFETY PRECAUTIONS (Laser)
The Nikon Laser Rangefinder uses an
invisible laser beam. Be sure to
observe the following:
Warning
• DonotdepressthePOWERON/
Measurement button while
looking into the optics from the
objective side. Failure to do this may
negatively affect or damage your
eyes.
• Donotaimatthe eye.
• Donotpointthelaseratpeople.
• Donotlookatthelaserwithanother
optical instrument such as through
lenses or binoculars, nor with the
naked eye. This may result in damage
to the eyes.
• Whennotmeasuring,please keep
yourfingersawayfromthePOWER
ON/Measurement button to avoid
accidentally emitting the laser beam.
• Whennotinuseforanextended
period, please remove the battery
from the body.
• Donotdisassemble/remodel/repair
the Nikon Laser Rangefinder. The
emitting laser may be harmful to
your health. A product that has been
disassembled/remodeled/repaired is
not guaranteed by the manufacturer.
• KeeptheNikonLaserRangefinder
out of reach of children when
stored.
• IftheNikonLaserRangefinder’s
body cover is damaged, or if it
emits a strange sound due to
dropping or some other cause,
remove the battery immediately
and stop using.
SAFETY PRECAUTIONS
(lithium battery)
If handled incorrectly, the battery
may rupture and leak, corroding
equipment and staining clothing.
Be sure to observe the following:
• Installthebatterywiththe+and–
poles positioned correctly.
• Thebatteryshouldberemoved
when exhausted or during
extended periods of non-use.
• Donotshorttheendterminalofthe
battery chamber.
• Donotcarrytogether with keys
or coins in a pocket or bag, it may
short and cause overheating.
• Donotexposethebatterytowater,
or a flame. Never disassemble the
battery.
• Donotchargethelithiumbattery.
• Ifliquidfromadamagedbattery
comes into contact with clothing or
skin, rinse immediately with plenty
of water. If liquid from a damaged
battery enters the eyes, rinse
immediately with clean water, then
consult a doctor.
• Whendisposingofthebattery,
follow your local area regulations.
• Preventchildrenfromputting
rubber eyecup or small parts,
etc. into their mouths. If children
swallow such parts, consult a
doctor immediately.
• Ifusingtherubbereyecupfora
long period of time, some people
may suffer skin inflammation. If any
symptoms occur, stop using it and
consult a doctor immediately.
• WhencarryingtheNikonLaser
Rangefinder, store it in the case.
• IfyourNikonLaserRangefinder
should fail to operate correctly,
discontinue use immediately and
consult with your local dealer for
instructions on where to send it for
repair.
Cautions before use
SAFETY PRECAUTIONS
(Monocular)
The Nikon Laser Rangefinder
employs a monocular in its optical
system in order to aim at the target.
Be sure to observe the following:
Warning
• Never look directly at the sun, an
intense light or the laser beam
when using the Nikon Laser
Rangefinder.
Cautions
• WhennotusingtheNikonLaser
Rangefinder, do not push the
POWERON/Measurementbutton.
• Donotusethisproductwhile
walking. Failure to observe this
may cause injury or malfunction
as a result of walking into
something, hitting others, falling
or other accidents.
• Donotswingaroundbythe
strap. This may result in hitting
others and cause injury.
• Donotplacethisproductin
an unstable place. Failure to
observe this may result in falling
or dropping and cause injury or
malfunction.
• Keeptheplasticbagusedtowrap
this product or other small parts
out of reach of children.

8 9
En
Fr
Es
Pt
En
Fr
Es
Pt
Storage
• Watercondensationormoldmay
occur on the lens surface because of
high humidity. Therefore, store the
Nikon Laser Rangefinder in a cool,
dry place.
After use on a rainy day or at night,
thoroughly dry it at room
temperature, then store in a cool,
dry place.
CARE AND MAINTENANCE
Lenses
• Whenremovingdustonthelens
surface, use a soft oil-free brush.
• Whenremovingstainsorsmudges
like fingerprints from the lens
surface, wipe the lenses very gently
with a soft clean cotton cloth or
quality oil-free lens tissue. Use a
small quantity of pure alcohol (not
denatured) to wipe stubborn
smudges. Do not use velvet cloth or
ordinary tissue, as it may scratch the
lens surface. Once the cloth has
been used for cleaning the body, it
should not be used again for the
lens surface.
Main body
• Cleanthebodysurfacewithasoft,
clean cloth after blowing away dust
with a blower* lightly. Do not use
benzene, thinner, or other cleaners
containing organic solvents.
* A blower is rubber cleaning
equipment that blows air from a
nozzle.
SAFETY PRECAUTIONS
Cautions
• TheNikonLaserRangefinderisnot
designed for use underwater.
• Rain,water,sandandmudshould
be removed from the rangefinder
body surface as soon as possible,
using a soft, clean cloth.
• DonotleavetheNikonLaser
Rangefinder in a car on a hot or
sunny day, or near heat-generating
equipment. This may damage or
negatively affect it.
• DonotleavetheNikonLaser
Rangefinder in direct sunlight.
Ultraviolet rays and excessive heat
may negatively affect or even
damage the unit.
• IftheNikonLaserRangefinderis
exposed to sudden changes in
temperature, water condensation
may occur on lens surfaces. Do
not use the product until the
condensation has evaporated.
• Measurementrange:5-500 meters/6-550 yards
• High-quality6xfinderwithmultilayercoating
• FirstTargetPrioritymodeisemployed
• Singlepressofbuttonenablesapprox.8-second
continuous measurement
• Automaticpowershut-off(afterapprox.8seconds
unoperated)
• Defaultto“LastUse”settings
• Rainproof—JIS/IECprotectionclass4(IPX4)
equivalent (under our testing conditions)
• Invisible/EyesafeEN/IECClass1MLaser
The Nikon Laser Rangefinder uses an invisible
laser beam for measuring. It measures the time the
laser beam takes to travel from the rangefinder
to the target and back. Laser reflectivity and
measurement results may vary according to climatic
and environmental conditions, as well as the color,
surface finish, size, shape and other characteristics
of the target.
The following conditions makes measuring easier:
• Cloudyweather
• Bright-coloredtarget
• Targetwithhighlyreflectivesurface
• Large-sizetarget
• Whenlaserincidentangletothetargetiscloseto90
degrees
Measurement may result in inaccuracy or failure in
the following cases:
• Targethassmallorslenderreflectivesurface
• Targethasdiffusingreflectivesurface
• Targetdoesnotreflectthelaserbeamtothe
rangefinder
• Targethastotallyreflectivesurface(glass,mirror,
etc.)
• Blacktarget
• Targethassteppedsurface
• Insnow,rainorfog
• Targetmeasuredthroughglass
• Reflectivesurfacemeasuredfromdiagonaldirection
• Movingorvibratingtarget
• Obstaclecuttingacrossinfrontofthetarget
• Whenmeasuringthesurfaceofwater
Key FeaturesCautions before use
This symbol indicates that this battery is to be
collected separately.
The following apply only to users in European
countries.
• This battery is designated for separate collection at an
appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries
This symbol indicates that this product is to be
collected separately.
The following apply only to users in European
countries.
• This product is designated for separate collection at
an appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries

10 11
En
Fr
Es
Pt
En
Fr
Es
Pt
1
2
4
5
3
9
8
6
!q
9
!p
7
!w
!e
Nomenclature/Composition
1Monocular objective lens
2Laser emission aperture
3Laser detector aperture
4MODEbutton
5POWERON/Measurementbutton
66x monocular eyepiece
7Eyecup/diopteradjustmentring
8Diopter index
9Strap eyelet
!p Battery chamber cover "Open" indication
!q Battery chamber cover
!w Productnumberlabel
!e FDA information indication
Inserting and Changing battery
•Type of battery: 3V CR2 lithium battery
•Battery remaining amount indicators
* Battery condition mark in the internal display warns when the battery needs to be replaced.
: Battery has enough power for use.
:Batterylevelisgettinglow.Preparetoreplacethebattery.
: Battery level is low. Battery should be replaced with a new one.
flashing : Battery is exhausted. After the indicator flashes three times, the laser rangefinder
automaticallypowersoff.Pleasereplacethebattery.
1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its
rubber packing for water resistance.
2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber. The [-] pole
should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the Nikon
Laser Rangefinder will not operate.
Whenreplacingthebattery,taketheoldbatteryoutfirst.Theninsertanewone.
3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the
rubber packing for water resistance, but continue to turn it all the way until it stops. Confirm that the
cover is securely closed.
•Battery life
Continuous operation: Approx. 2,000 times (at approx. 20°C)
This figure may differ according to condition, temperature, and other factors such as target shape, color, etc.
Use only as a guide.
* The battery supplied with this Laser Rangefinder is for operation checking. Due to natural electrical discharge, the life of this
battery will likely be shorter than that noted above.
* If water enters the battery chamber due to submersion, dry the battery chamber well, then replace the battery.
Body .................................. x1
Soft case ........................... x1
Strap .................................. x1
Lithium battery (CR2) .. x1
Composition

12 13
En
Fr
Es
Pt
En
Fr
Es
Pt
Internal display Measurement
Caution — use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
1. Install a battery in the battery chamber. (See
"Inserting and Changing Battery")
2. Diopter adjustment
Adjust diopter to obtain a clear LCD indication in the
viewfinder.
First, rotate the diopter adjustment ring counterclockwise
untilitcomestoacompletestop.Next,pressthePOWER
ON/Measurement button to turn on the power (Confirm
theinternaldisplayison).Whilelookingthroughthe
eyepiece, rotate the diopter adjustment ring clockwise
until the LCD comes into focus.
If you rotate the ring too much, rotate it
counterclockwise substantially then adjust it again.
If the diopter is not adjusted to correspond to your
eyesight, you may not be able to correctly aim at your
subject.
3. Measuring
Before measuring, be sure to confirm unit setting.
Measuring.
Failure to measure or
unable to measure
distance.
Displays the
measured figure.
(Target 1)
Displays the
measured figure.
(Target 2)
:Aimatthetargetyouwanttomeasure.Positionthetargetatthecenterofthetargetmark.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
: Now measuring
: "Failure to measure" or "Unable to measure"
* Usually, an LCD employs equal or lower magnification. However the LCD of this product is magnified
by the high magnification of the eyepiece. Although this LCD was produced using the most advanced
technology, it is impossible to eliminate dust completely. As a result, dust may be seen. It will not,
however, affect measurement accuracy or safety during use.
Unit of measure (m/yd.)
Target mark
Laser irradiation mark
Battery condition
Distance
Immediately after
power-on. (Initializing) Stand-by. Target aiming.
1.PressthePOWERON/
Measurement button for
power-on. 2. Aim at the target.
3.PressPOWERON/Measurementbuttononcetostartcontinuous
measurement for approx. 8 seconds. (Single measurement mode is
not available with this laser rangefinder.)
4. For approx. 8 seconds, the internal display shows“distance”and “fail to
measure”indicator alternately. (Laser irradiation mark is blinking.)
5. After continuous measurement, the measured results are
displayed for approx. 8 seconds, then power turns off. If you
press the
POWERON/Measurement
button during power-on
(while the internal display is active), another approx. 8-second
measurement starts.

14 15
En
Fr
Es
Pt
En
Fr
Es
Pt
Specifications
Measurement system
Measurement range 5-500 m/6-550 yds.
Distance display (increment) Every 1 m/yd.
Optical system
Magnification (x) 6
Effectivediameterofobjectivelens
(mm) 20
Angular field of view (real) (˚) 6.0
Eyerelief(mm) 16.7
Exitpupil(mm) 3.3
Diopter adjustment ±4m
-
1
Others
Operating temperature (˚C) -10—+50
Powersource CR2 lithium battery x 1 (DC 3V)
Dimensions(LxHxW)(mm) 91 x 73 x 37
Weight(g) Approx. 125 (without battery)
Structure JIS/IECprotectionclass4(IPX4)equivalent(under
our testing conditions)*
Safety Class1MLaserProduct(EN/IEC60825-1:2007)
Class ILaserProduct(FDA/21CFRPart1040.10:1985)
EMC FCCPart15SubPartBclassB,EU:EMCdirective,
AS/NZS, VCCI classB
Environment RoHS,WEEE
Meter [ ]Yard [ ]
1. Turn on the power (Confirm the internal display is on).
2.PressandholdtheMODEbuttonformorethantwoseconds.
Whenthedisplayunithasbeenswitched,releasethebutton.
3. After the unit is set, results will be converted and displayed in
the selected distance display unit.
Distance display units
Measurement results are displayed in yards/meters.
(Factory default setting is yard.)
This Laser Rangefinder has a First
TargetPrioritySystem.Whenmeasuring
overlapping subjects, this equipment
displays the distance to the closest subject.
Target priority mode
Others
This Nikon Laser Rangefinder is a basic rangefinder. Its results cannot be used as official evidence.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15ofthe
FCCRulesandtoEUEMCdirective.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadianInterference-CausingEquipmentRegulations.
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

16 17
En
Fr
Es
Pt
En
Fr
Es
Pt
* Water resistance performance
ThisNikonLaserRangefinderisequivalenttoJIS/IECprotectionclass4(IPX4)(underourtestingconditions).Thisrating
does not guarantee the water resistance performance of the unit or that it will be free from damage or problems under
allconditions.Pleaseobservethefollowingwhenusing:
•Theunitisnotasealedstructure,soitshouldnotbeoperatednorheldinrunningwater.
•Ifanymoistureisfoundonmovablepartsoftheunit,stopusingitandwipeitoff.
Laser
Class EN/IECClass1M
Wavelength(nm) 905
Pulseduration(ns) 20
Output(W) 10
Beam divergence (mrad) Vertical: 3.8, Horizontal: 0.17
Operating humidity (%RH) 80 or less (without dew condensation)
Specifications Troubleshooting/Repair
If your Nikon Laser Rangefinder should require repair, please contact your local dealer for details regarding where to
send it. Before doing so, you are advised to consult the Troubleshooting Table below.
Symptom Check Points
Unitdoesnotturnon—LCDfailsto
illuminate
•DepressPOWERON/Measurementbutton.
•Checkbatteryinsertion.
•Replacethebatteryifnecessary.
Target range cannot be obtained
•Besurethatnothing,suchasyourhandorfinger,isblockingthelaser
emission aperture and laser detector.
•Besurethatthelaseremissionapertureandlaserdetectorareclean.
Clean them if necessary.
•Besurethatthetargetshapeandconditionareappropriatetoreflectthe
laser beam.
•Replacethebattery.
[- - -] (“Cannot measure”) appears •Besuretoholdtheunitsteadywhilemeasuring.
•Besurethetargetiswithinmeasuringrange.
Closer target cannot be measured •Besurethatnothing,suchasleavesorgrass,isbetweentheNikonLaser
Rangefinder and the target.
Target beyond a certain distance
cannot be measured
•Besurethatnothing,suchasleavesorgrass,isbetweentheNikonLaser
Rangefinder and the target.

18 19
En
Fr
Es
Pt
En
Fr
Es
Pt
If problems persist after consulting the Troubleshooting Table, please contact your local dealer to check/repair the Nikon
Laser Rangefinder.Never let anyone other than the official representative of the product manufacturer check or repair
the Nikon Laser Rangefinder.Failure to follow this instruction could result in injury, or damage to the product.
Symptom Check Points
Measurement result is unstable
•Replacethebattery.
•Besurethatthetargetshapeandconditionareappropriatetoreflectthe
laser beam.
•Besuretoholdtheunitsteadywhilemeasuring.
•Besurethatnothing,suchasleavesorgrass,isbetweentheNikonLaser
Rangefinder and the target.
Incorrect result is displayed
•Replacebattery.
•Besurethatthetargetshapeandconditionareappropriatetoreflectthe
laser beam.
•Besurethatnothing,suchasleavesorgrass,isbetweentheNikonLaser
Rangefinder and the target.
CONTENIDO
Precaucionesantesdeluso ............................... 20-23
Características clave .................................................... 24
Nomenclatura/Componentes .................................. 25
Inserción y cambio de la batería ............................. 26
Pantallainterna............................................................. 27
Medición .......................................................................... 28
Modo de prioridad al sujeto/Unidades de
indicación de la distancia/Otros .............................. 29
Especificaciones..................................................... 30-31
Solución de problemas/Reparación ............... 32-33
Español
Troubleshooting/Repair

20 21
En
Fr
Es
Pt
En
Fr
Es
Pt
Precauciones antes del uso
Respete estrictamente las
orientaciones siguientes para
utilizar correctamente el equipo
y evitar accidentes que podrían
ser peligrosos. Antes de utilizar
el producto lea atentamente las
"Precauciones antes del uso" y las
instrucciones de uso correcto que
acompañan al producto.Tenga a
mano este manual para
consultarlo cuando lo precise.
ADVERTENCIA
Estaindicaciónleavisaqueunuso
incorrecto que no tenga en cuenta
este punto puede provocar la muerte
o heridas graves.
PRECAUCIÓN
Estaindicaciónleadvierteque
cualquier utilización inadecuada que
ignore el contenido aquí incluido
puede provocar lesiones o pérdidas
materiales.
PRECAUCIONES DE SEGURIDAD
(Láser)
EltelémetroláserNikonutilizaunhaz
láserinvisible.Asegúrese de respetar lo
siguiente:
Advertencia
• No pulse el botón POWERON/
Measurement (encendido/medición)
mientras mira la óptica desde el
lado del objetivo. Si lo hace sus
ojos podrían verse afectados
negativamente o lesionados.
• Noapuntealojo.
• Noapunteapersonasconelláser.
• Noutilicelaunidadjuntoconotros
elementos ópticos adicionales, como
lentes o binoculares. La utilización
de un elemento óptico junto con el
telémetro láserNikonaumentael
riesgo de dañar los ojos.
• Cuando no esté realizando
mediciones, mantenga los dedos
apartados del botón POWERON/
Measurement (encendido/medición)
para evitar la emisión accidental de
unhazláser.
• Sinovaautilizarloduranteun
período prolongado, retire la batería
del cuerpo.
• Nodesmonte/remodele/repareel
telémetroláserNikon.Elláseremitido
podría ser nocivo para su salud. Un
producto que haya sido desmontado/
remodelado/reparado pierde la
garantía del fabricante.
• MantengaeltelémetroláserNikon
fuera del alcance de los niños
cuando lo guarde.
• Silacarcasadeltelémetro láser
Nikonestádañadaosiemiteun
ruido raro después de una caída o
por cualquier otra causa, retire la
batería inmediatamente y deje de
usarlo.
Muchas gracias por comprar el Nikon Laser Rangefinder COOLSHOT 20.
〇Antesdeutilizarelproductoleaatentamentelas"Precaucionesantesdeluso"ylas
instrucciones de uso correcto del manual de instrucciones (este manual).
〇Tenga a mano este manual para consultarlo cuando lo precise.
〇No desmonte ni repare este producto usted mismo, puede provocar algún problema grave.
Un producto que haya sido desmontado o reparado pierde la garantía del fabricante.
●Las especificaciones y el diseño pueden cambiar sin aviso previo.
●Queda prohibida la reproducción total o parcial (excepto para citas breves en artículos o
revisiones de evaluación) de este manual en cualquier forma sin la autorización previa por
escrito de NIKON VISION CO., LTD.
●NIKON VISION CO., LTD. se reserva el derecho a modificar el contenido explicado en estos
manuales en cualquier momento y sin aviso previo.

22 23
En
Fr
Es
Pt
En
Fr
Es
Pt
PRECAUCIONES DE SEGURIDAD
(Batería de litio)
Si se maneja incorrectamente, la
batería pueden romperse y sufrir
fugas, corroyendo los equipos y
manchando la ropa
Asegúrese de respetar lo siguiente:
• Montelabateríaconlospolos+y-
orientados correctamente.
• Labateríadeberetirarsecuando
estáagotadaoenperíodos
prolongados de no utilización.
• Nocortocircuiteelterminaldel
extremodelacámaradelabatería.
• Nolallevejunto con llaves o
monedas en un bolsillo o bolsa,
podría cortocircuitarse y provocar
un sobrecalentamiento.
• Noexpongalabateríaalaguania
llamas. Nunca desmonte la batería.
• Norecarguelabateríadelitio.
• Siellíquidodeunabateríadañada
entra en contacto con la ropa o la
piel,enjuáguelainmediatamente
con mucha agua. Si el líquido de
una batería dañada va a parar a los
ojos,enjuáguelosinmediatamente
con agua limpia y consulte a un
médico.
• Desechelabateríaconformealas
regulaciones locales de su zona.
• Nopermitaquelosniñosse
pongan las ojeras de goma, piezas
pequeñas, etc. en la boca. Si un
niño se traga alguna de estas
piezas, consulte a un médico
inmediatamente.
• Siutilizanlasojerasdegoma
durante mucho tiempo, algunas
personas pueden notar una
inflamación de la piel. Si presenta
algún síntoma, deje de utilizarlas
y consulte inmediatamente a un
médico.
• Cuandotransporteeltelémetro
láserNikon,guárdeloenlafunda.
• SisutelémetroláserNikoncaeo
funciona incorrectamente, deje de
usarlo de inmediato y consulte a
su distribuidor local dónde debe
enviarlo para su reparación.
PRECAUCIONES DE
SEGURIDAD (Monocular)
EltelémetroláserNikonemplea un
monocular en su sistema óptico
para apuntar al objetivo. Asegúrese
de respetar lo siguiente:
Advertencia
• Nuncamiredirectamentealsol,
aunaluzintensanialhazláser
cuando utilice el Nikon Laser
Rangefinder.
Precauciones
• Cuando no utilice el Nikon
Laser Rangefinder, no pulse el
botón POWERON/Measurement
(encendido/medición).
• Noutiliceesteproductomientras
camina. Si lo hace podría
provocar lesiones o averías como
resultado de tropiezos, golpes
a otras personas, caídas u otros
accidentes.
• Nolobalanceeconlacorrea.
Podríagolpearaalguienyherirle.
• Nocoloqueesteproductoenun
lugar inestable. No respetar esta
indicación puede provocar una
caída y causar lesiones o averías.
• Mantengalabolsadeplástico
utilizada para envolver el
producto y las piezas pequeñas
fuera del alcance de los niños.
Almacenamiento
• Encasodehumedadelevadapuede
aparecer condensación de agua o
moho sobre la superficie de las
lentes.Portanto,guardeel
telémetroláserNikonenunlugar
fresco y seco.
Después de usarlo en un día lluvioso
o por la noche, séquelo a
temperaturaambienteyguárdelo
en un lugar fresco y seco.
CUIDADO Y MANTENIMIENTO
Lentes
• Limpieelpolvodelasuperficiede
la lente con un cepillo sin aceite.
• Aleliminarmanchasoresiduos
como marcas de dedos de la
superficie de las lentes, límpielas
muy suavemente con un paño de
algodón suave y limpio o con un
paño de limpieza de lentes de
calidad sin aceite. Utilice una
pequeña cantidad de alcohol puro
(no desnaturalizado) para limpiar
las manchas resistentes. No utilice
trapos de terciopelo ni papel tisú
común dado que pueden rayar las
lentes. Si se ha utilizado un paño
para limpiar el cuerpo no debe
usarse para la superficie de la lente.
Cuerpo principal
• Limpielasuperficiedelcuerpocon
un paño suave y limpio después de
eliminar suavemente el pelo con un
soplador*. No utilice benceno,
disolvente ni otros limpiadores con
disolventesorgánicos.
* Un soplador es un equipo de para
limpieza de goma que sopla aire
por una boquilla.
PRECAUCIONES DE SEGURIDAD
Precauciones
• ElNikonLaserRangefindernoestá
diseñado para utilizarlo bajo el
agua.
• Lluvia,agua,arena y barro deben
eliminarse de la superficie del
telémetro lo antes posible,
utilizando un paño suave y limpio.
• NodejeeltelémetroláserNikon
en un coche estacionado en un
díacálidoosoleado,ocercadeun
equipoquegenerecalor.Podría
dañarlo o afectarle negativamente.
• NodejeeltelémetroláserNikon
bajo la luz solar directa. Los rayos
ultravioleta y el exceso de calor
podrían afectar negativamente a la
unidad e incluso dañarla.
• Siseexponeeltelémetroláser
Nikon a cambios de temperatura
repentinos, puede condensarse
agua en las superficies de las lentes.
No utilice el producto hasta que la
condensación se haya evaporado.
Precauciones antes del uso
Este símbolo indica que esta batería se recogerá por
separado.
Lo siguiente sólo se aplicará a usuarios en países
europeos.
• Esta batería ha sido designada para su recogida en
un punto de recogida apropiado. No la tire como
desecho doméstico.
• Para más información, contacte con el vendedor o
autoridades locales a cargo de la gestión de
residuos.
Símbolo para recogida separada aplicable en países
Europeos
Símbolo para recogida separada aplicable en países
Europeos
Este símbolo indica que esta producto se recogerá por
separado.
Lo siguiente sólo se aplicará a usuarios en países
europeos.
• Esta producto ha sido designada para su recogida en
un punto de recogida apropiado. No la tire como
desecho doméstico.
• Para más información, contacte con el vendedor o
autoridades locales a cargo de la gestión de
residuos.

24 25
En
Fr
Es
Pt
En
Fr
Es
Pt
• Gamademedición:5-500metros/6-550yardas
• Visordealtacalidadde6xconrecubrimiento
multicapa
• Elinstrumentoaplicaelmodedeprioridadalprimer
sujeto
• Unapulsacióndelbotónproporcionaunamedición
continua de unos 8 segundos
• Apagadoautomático(despuésdeaprox. 8 s sin
utilizar)
• Predeterminaciónalosajustes"Usadosenúltimo
lugar"
• Apruebadelluvia—Gradodeprotección
equivalenteaJIS/IECdeclase4(IPX4)
• Láserinvisible/Seguro para la vista de clase 1M según
EN/IEC
El telémetro láser Nikon utiliza un haz láser invisible
para realizar la medición. Mide el tiempo que tarda
el haz láser en ir desde el telémetro al objetivo
y volver. La reflectividad láser y los resultados
de medición pueden variar en función de las
condiciones climáticas y ambientales, así como del
color, acabado superficial, tamaño, forma y otras
características del sujeto.
Las condiciones siguientes facilitan la medición:
• Tiemponublado
• Sujetodecoloresbrillantes
• Sujetoconsuperficiemuyreflectantes
• Sujetodegrantamaño
• Cuandoelángulodeincidenciadelláserescercano
a 90 grados
La medición puede resultar imprecisa o fallar en
los casos siguientes:
• Sujetoconunasuperficiereflectantepequeñao
delgada
• Sujetoconunasuperficiereflectantedifusora
• Sujetoquenoreflejaelhazláserhaciael
Rangefinder
• Sujetoconunasuperficietotalmentereflectante
(vidrio, espejo, etc.)
• Sujetonegro
• Sujetoconunasuperficieescalonada
• Nieve,lluviaoniebla
• Sujetomedidoatravésdevidrio
• Superficiereflectantemedidaendireccióndiagonal
• Sujetoenmovimientoovibrante
• Obstáculointerpuestodelantedelsujeto
• Almedirlasuperficiedelagua
Características clave Nomenclatura/Componentes
1Objetivo monocular
2Aberturaparaemisiónláser
3Aberturadeldetectorláser
4BotónMODE
5BotónPOWERON/Measurement(encendido/
medición)
6Ocular monocular de 6x
7Ojera/Aro de ajuste de dioptrías
8Índice de dioptrías
9Argolla para correa
!p Indicación "Abierta" de la tapa del
compartimento de la batería
!q Tapa del compartimento de la batería
!w Etiquetadenúmerodeproducto
!e Indicación informativa de la FDA
Cuerpo .............................. x1
Caja flexible .................... x1
Correa ............................... x1
Batería de litio (CR2) .... x1
Componentes
1
2
4
5
3
9
8
6
!q
9
!p
7
!w
!e

26 27
En
Fr
Es
Pt
En
Fr
Es
Pt
Inserción y cambio de la batería
•Tipo de batería: Batería de litio CR2 de 3 V
•Indicadores de la carga restante de la batería
* La marca del estado de la batería en la pantalla interna le avisa cuando esta necesita ser sustituida.
: La batería tiene carga suficiente para usarla.
:Elniveldelabateríaseestáquedandobajo.Prepáreseparasustituirlabatería.
:Elniveldelabateríaesbajo.Debesustituirselabateríaporunanueva.
destellante:Labateríasehaagotado.Elindicadordestellarátresvecesyelrangefinderláserse
apagaráautomáticamente.Sustituyalabatería.
1. Abra la tapa del compartimento de la batería
Girelatapadelcompartimentodelabateríaenelsentidocontrarioaldelasagujasdelrelojyretírela.
Noesfácildeabrirdebidoasuempaquetaduradegomadeimpermeabilidad.
2. Sustituya la batería vieja por otra nueva
Introduzca una batería nueva colocada correctamente conforme a la indicación del interior del
compartimento.Elpolo[-]debecolocarsehaciaelinteriordelcompartimento.Sinoseinsertala
bateríacorrectamente,elNikonLaserRangefindernofuncionará.Alsustituirlabatería,retireen
primer lugar la batería usada. A continuación inserte una nueva.
3. Cierre la tapa del compartimento de la batería
Girelatapadelcompartimentodelabateríaenelsentidodelasagujasdelrelojparaenroscarlaenel
cuerpo.Puedequecuestedecerrardebidoalagomadelaimpermeabilización,perosigagirándola
del todo hasta que haga tope. Compruebe que la tapa esté cerrada firmemente.
•Duración de la batería
Funcionamiento continuo: Aprox. 2.000 ciclos (a aprox. 20°C)
Estacifrapuedevariarenfuncióndelestadodelabatería,latemperaturayotrosfactorescomoformadel
sujeto, color, etc. Utilícela sólo como orientación.
*Labateríasuministradaconesterangefinderláseresparacomprobarelfuncionamiento.Debidoaladescargaeléctrica
natural,laduracióndelabateríaseráprobablementemenorquelaantesindicada.
* Si entra agua en el compartimiento de la batería debido a una inmersión, seque bien el compartimiento de la batería y
cambie la batería.
Pantalla interna
: Apunte al sujeto que desea medir. Coloque el sujeto en el centro de la marca de sujeto.
:Aparecemientrasseestáemitiendoelláserparaunamedición.
No mire hacia el lado de las lentes del objetivo mientras aparezca esta marca.
:Seestámidiendo
: "Medición fallida" o "No se pudo medir"
* Normalmente, un LCD aplica una ampliación igual o menor. No obstante, el LCD de este producto se
amplíaconlagranampliacióndelocular.AunqueesteLCDsefabricóempleandolatecnologíamás
avanzada, es imposible eliminar totalmente el polvo. Como resultado, puede verse polvo. No obstante,
noafectaráalaprecisióndelamediciónnialaseguridaddeutilización.
Distancia Unidad de medida (m/yarda)
Marca de sujeto
Marcadeemisióndeláser
Estadodelabatería

28 29
En
Fr
Es
Pt
En
Fr
Es
Pt
Medición
Precaución: La utilización de controles, ajustes o
parámetros de procedimiento distintos de los aquí
indicados puede provocar una exposición a
radiaciones peligrosas.
1. Coloque una batería en el compartimento de la
batería (consulte "Inserción y cambio de la batería")
2. Ajuste de dioptrías
Ajuste las dioptrías para conseguir una indicación clara del
LCD en el visor.
Enprimerlugargireelarodeajustededioptríasen
sentido contrario al de las agujas del reloj hasta que llegue
asutope.AcontinuaciónpulseelbotónPOWERON/
Measurement para encender el aparato (confirme que la
pantallainternaestáencendida).Mireporelocularygire
el aro de ajuste de dioptrías en el sentido de las agujas del
reloj hasta que el LCD quede enfocado.
Sigirademasiadoelaro,hágalogirarensentidocontrario
al de las agujas del reloj y vuelva a ajustar.
Sinoajustalasdioptríasasugraduación,quizásnopueda
enfocar correctamente su sujeto.
3. Medición
Antes de medir asegúrese de confirmar el ajuste de la
unidad.
Inmediatamente
después del encendido.
(inicializando)
Modo de espera. Apuntar al sujeto.
Medición
Medición fallida o
no se pudo medir la
distancia.
Muestra la cifra
medida (Sujeto 1) Muestra la cifra
medida (Sujeto 2)
Estetelémetroláserincorporaun
sistemadeprioridadalsujetomás
cercano. Cuando mide sujetos que se
superponen, este equipo muestra la
distanciahastaelsujetomáspróximo.
Unidades de indicación de la distancia
Metro [ ]
Yarda [ ]
Los resultados de medición se indican en yardas/metros
(elajustepredeterminadodefábricasonlasyardas).
1.Enciendaelaparato(confirmequelapantallainternaestá
encendida).
2.MantengapulsadoelbotónMODEdurantemásdedossegundos.
Cuando la unidad de visualización haya cambiado, suelte el botón.
3.Unavezfijadalaunidad,losresultadosseconvertirányvisualizarán
en la unidad de indicación de la distancia seleccionada.
Modo de prioridad al sujeto
Otros
EstetelémetroláserNikonesun
telémetrobásico.Susresultadosnose
pueden utilizar como prueba oficial.
EsteequipohasidoevaluadoycumpleconloslímitesparaundispositivodigitaldeclaseB,deconformidadconlaParte15
delasreglasdelaFCCyconladirectivasobreCEMdelaUE.Estoslímitesestándiseñadosparaproporcionarunaprotección
razonablecontralainterferenciaperjudicialenunainstalaciónresidencial.Esteequipogenera,usaypuedeirradiarenergía
de frecuencia de radio y, si no se instala y usa de conformidad con las instrucciones, podría causar una interferencia
perjudicial a las comunicaciones de radio. Sin embargo, no hay garantía de que la interferencia no ocurra en una instalación
particular. Si el equipo provoca perturbaciones en la recepción de radio o televisión, lo que se puede comprobar apagando
yvolviendoaencenderelequipo,elusuariodeberíaintentarcorregirlainterferenciamedianteunaomásdelasmedidas
siguientes:
•Reorienteoreubiquelaantenareceptora.
•Aumentelaseparaciónentreelequipoyelreceptor.
•Consultealdistribuidoroauntécnicodetelevisión/radioexperimentado.
EsteaparatodigitaldeClaseBcumpletodoslosrequisitosdelasRegulacionesCanadiensessobreEquiposqueProvocan
Interferencias.
EstedispositivocumpleconlaParte15delasReglasdelaFCC.El
funcionamientoestásujetoalasdoscondicionessiguientes:
(1)Estedispositivonopuedeprovocarinterferenciaspeligrosas,y
(2)Estedispositivodebeaceptarcualquierinterferenciarecibida,incluidaslas
interferencias que pueden provocar un funcionamiento no deseado.
1.Presioneelbotón
POWERON/Measurement
para encender.
2. Apunte al sujeto.
3.PresioneelbotónPOWERON/Measurement(encendido/medición)
para empezar una medición continua de
aprox.
ocho segundos (en
estetelémetronoestádisponibleelmododemediciónúnica).
4. Durante
aprox.
ocho segundos la pantalla interna muestra
alternativamente los indicadores "distancia medida" y "no se pudo
medir"(destellalamarcaderadiaciónláser).
5. Después de la medición continua, se visualizan los resultados
medidos durante aprox. ocho segundos y después se apaga
lacorriente.SipresionaelbotónPOWERON/Measurement
(encendido/medición) con el aparato encendido (con la pantalla
interna activa) se inicia otra medición de aprox. ocho segundos.

30 31
En
Fr
Es
Pt
En
Fr
Es
Pt
Especificaciones
Sistema de medición
Gamademedición 5-500 metros/6-550 yardas
Visualización de distancias
(incremento) Cada 1 metro/yarda
Sistema óptico
Aumento (x) 6
Diámetroefectivodelobjetivo(mm) 20
Campo de visión angular (real) (˚) 6,0
Distancia aprox. de la pupila de salida
al ocular (mm) 16,7
Pupiladesalida(mm) 3,3
Ajuste de dioptrías ±4 m
-
1
Otros
Temperatura de funcionamiento (˚C) -10—+50
Fuente de alimentación Batería de litio CR2 x 1 (3 Vcc)
Dimensiones (L x Al x An) (mm) 91 x 73 x 37
Peso(g) Aprox. 125 (sin batería)
Estructura GradodeprotecciónequivalenteaJIS/IECdeclase4(IPX4)(bajonuestras
condiciones de ensayo)*
Seguridad Productoláserdeclase1M(EN/IEC60825-1:2007)
ProductoláserdeclaseI(FDA/21CFRPart1040.10:1985)
CEM FCCParte15Sub-parteB claseB,UE:directivaCEM,AS/NZS,VCCIclaseB
Medio ambiente RoHS,WEEE
* Prestaciones de resistencia al agua
EstetelémetroláserpresentaungradodeprotecciónequivalenteaJIS/IECdeclase4(IPX4)(bajonuestrascondiciones
deensayo).Estaclasificaciónnogarantizaquelaunidadnosufraningúndañooproblemabajocualquiersituación.Al
utilizarla, respete lo siguiente:
•Launidadnoesunaestructurasellada,porloquenodebeutilizarsenimantenersebajoaguaencirculación.
•Siaparecehumedadenlaspiezasmóvilesdelaunidad,dejedeusarlayséquela.
Láser
Clase EN/IECClase1M
Longitud de onda (nm) 905
Duración del impulso (ns) 20
Potencia(W) 10
Divergencia del haz (mrad) Vertical: 3,8, Horizontal: 0,17
Humedad de funcionamiento (%HR) 80 o menos (sin condensación)

32 33
En
Fr
Es
Pt
En
Fr
Es
Pt
Solución de problemas/Reparación
Si su telémetroláserNikonprecisaraalgunareparación,póngaseencontactoconsudistribuidorlocalparasabera
dónde debe enviarlo. Antes de hacerlo, le aconsejamos que consulte la Tabla de solución de problemas siguiente.
Síntoma Puntos que debe comprobar
Launidadnoseenciende—
ElLCDnoseilumina
•PulseelbotónPOWERON/Measurement.
•Compruebelainsercióndelabatería.
•Sustituyalabateríasiesnecesario.
No se puede obtener el rango de
medición
•Compruebequenohaynada,comosumanoodedo,quebloqueela
aberturadeemisióndellásernieldetectordelláser.
•Compruebequelaaberturadeemisióndelláseryeldetectordelláser
estén limpios. Límpielas si es necesario.
•Compruebequelaformayelestadodelsujetosonadecuadospara
reflejarelhazláser.
•Sustituyalabatería.
Aparece [- - -] (“No se puede
medir”)
•Asegúresedemantenerlaunidadfijamientrasestámidiendo.
•Compruebequeelsujetoestádentrodelrangodemedición.
Nosepuedemedirunsujetomás
cercano
•Compruebequenohaynada,comohojasohierba,entreeltelémetro
láserNikonyelsujeto.
Nopuedemedirseunobjetomás
alládedeterminadadistancia
•Compruebequenohaynada,comohojasohierba,entreeltelémetro
láserNikonyelsujeto.
Si persisten los problemas después de consultar la Tabla de solución de problemas, póngase en contacto con su
distribuidor local para que revise/repare el telémetroláser Nikon. No deje que nadie distinto del representante oficial del
fabricante del producto revise ni repare el telémetro láserNikon.No respetar esta indicación podría provocar lesiones o
dañar el producto.
Síntoma Puntos que debe comprobar
Elresultadodelamediciónes
inestable
•Sustituyalabatería.
•Compruebequelaformayelestadodelsujetosonadecuadospara
reflejarelhazláser.
•Asegúresedemantenerlaunidadfijamientrasestámidiendo.
•Compruebequenohaynada,comohojasohierba,entreeltelémetro
láserNikonyelsujeto.
Se visualiza un resultado incorrecto
•Sustituyalabatería.
•Compruebequelaformayelestadodelsujetosonadecuadospara
reflejarelhazláser.
•Compruebequenohaynada,comohojasohierba,entreeltelémetro
láserNikonyelsujeto.

34 35
En
Fr
Es
Pt
En
Fr
Es
Pt
SOMMAIRE
Précautionsavantutilisation............................. 35-38
Caractéristiques principales ..................................... 39
Nomenclature/Composition .................................... 40
Insérer et remplacer la pile ....................................... 41
Écran interne .................................................................. 42
Mesure .............................................................................. 43
Mode priorité à la cible/Unités d'affichage de
distance/Autres.............................................................. 44
Spécifications .......................................................... 45-46
Guidededépistagedespannes/
Réparations .............................................................. 47-48
Français
Précautions avant utilisation
Mercid’avoirchoisiletélémètrelaserNikonCOOLSHOT20.
〇Avantd’utiliserl'appareil,lisezattentivementles«Précautionsavantutilisation»etlesmanuel
d'utilisation (ce manuel).
〇Conservez ces manuel à portée de main pour référence.
〇Ne démontez pas et ne réparez pas cet appareil vous-même, car ceci pourrait engendrer un
problèmesérieux.
La garantie constructeur ne s'applique pas aux produits qui ont été démontés ou réparés.
●Les spécifications et la conception sont sujettes à modification sans préavis.
●Aucune reproduction totale ou partielle de ce manuel, sous quelque forme que ce soit,
(àl'exceptiondebrèvescitationsdansdesrevuesoumagazines)nepeutêtrefaitesans
autorisation écrite de NIKON VISION CO., LTD.
●NIKON VISION CO., LTD. se réserve le droit de modifier le contenu de ces manuels à tout moment
sans préavis.

36 37
En
Fr
Es
Pt
En
Fr
Es
Pt
Respectez à la lettre les
instructions suivantes pour une
utilisation adéquate de votre
matériel et pour éviter tout
risque d'accident. Avant d’utiliser
l'appareil, lisez attentivement les
« Précautions avant utilisation »
et le mode d’emploi qui
accompagnent l'appareil.
Conservez ces instructions à
portée de main pour référence.
ATTENTION
Avertitdufaitqu’unemploiincorrect
en ignorant les points ci-dessous peut
se traduire par la mort ou de sérieuses
blessures.
PRÉCAUTION
Avertitdufaitqu’unemploiincorrect
en ignorant les points ci-dessous peut
se traduire par de sérieuses blessures
ou des dégâts matériels.
PRÉCAUTIONS DE SÉCURITÉ
(Laser)
LetélémètrelaserNikoncomporteun
faisceau laser invisible. Veillez à
respecter ce qui suit:
Attention
• N'appuyezpassurleboutonPOWER
ON/Mesure pendant que vous
regardez l'optique à partir du côté
objectif. Sinon, vos yeux pourrait être
affectés ou endommagés.
• Nevisezpaslesyeux.
• Nepointezpaslefaisceaulaservers
d'autres personnes.
• N'utilisezpasl'appareilenmême
temps que d'autres instruments
d'optique tels que des lentilles ou des
jumelles. L'utilisation d'un instrument
d'optique en même temps que le
Télémètre Laser Nikon augmente les
risques de blessures oculaires.
• Si vous n'effectuez pas de mesures,
ne placez pas vos doigts à proximité
duboutonPOWERON/Mesurepour
éviter d'allumer le faisceau laser par
accident.
• Sivousnel'utilisezpaspendantune
longue période de temps, veuillez
retirer la pile.
• Nepasdémonter/modifier/
réparer letélémètrelaserNikon.
Le laser émetteur pourrait être
nocif pour votre santé. La garantie
constructeur ne s'applique pas aux
produits qui ont été démontés/
modifiés/réparés.
• Nelaissezpasletélémètrelaser
Nikon à la portée des enfants.
• Silecouvercleduboîtierdu
télémètrelaserestendommagé,ou
s'il émet un bruit étrange en raison
d'une chute ou d'une autre cause,
retirez immédiatement la pile et
cessez d'utiliser l'appareil.
Veillez à respecter ce qui suit:
• Installezlapilemanièreàcequeles
pôles+et-soientcorrectement
positionnés.
• Lapiledoitêtreretiréequandelle
est déchargée et suite à toute
longue période de non-utilisation.
• Necourt-circuitezpaslescontacts
du compartiment à pile.
• Nelatransportezpasà proximité de
clefsoudepiècesdansunepoche
ou un sac, il pourrait y avoir un
court-circuit et une surchauffe.
• N'exposezpaslapileàl'eauouaux
flammes. Ne démontez jamais la
pile.
• Nerechargezjamaislepileau
lithium.
• Siduliquideprovenantd'unepile
endommagées venait à entrer en
contact avec un vêtement ou de
la peau, rincez immédiatement à
l'eau claire. Si du liquide provenant
d'une pile endommagées entrait
en contact avec les yeux, rincez
immédiatement à l'eau claire et
consultez un médecin.
• Lorsquevousjetezlapile,
conformez-vous aux lois de
recyclage locales.
• Nelaissezpaslesacenplastique
qui a servi à emballer ce produit ou
d'autrespetitespiècesàlaportée
des enfants.
• Empêchezlesenfantsdeporteràla
bouche les œilletons en caoutchouc
oud'autrepetitespièces,etc.Sides
enfantsavalaientcetypedepièces,
consultez immédiatement un
médecin.
• Sivousutilisezl'œilletonen
caoutchouc pendant longtemps, ils
peuvent provoquer une irritation
cutanée. Arrêter d'utiliser l'appareil
et consultez immédiatement un
médecin si cela se produisait.
• Lorsquevoustransportezle
télémètrelaserNikon,rangez-le
dans son étui.
• SivotreTélémètreLaserNikon
ne fonctionne pas correctement,
cessez immédiatement de l'utiliser
et consultez votre revendeur local
pour déterminer la destination de
réparation.
PRECAUTIONS DE SECURITE
(Pile au lithium)
Si elle n'est pas convenablement
manipulée, la pile peut se rompre
et fuir, provoquant la corrosion
de l'appareil et des taches sur les
vêtements.
PRÉCAUTIONS DE SÉCURITÉ
(Objectif monoculaire)
LesystèmeoptiqueduTélémètre
Laser Nikon comporte un objectif
monoculaire pour viser la cible.
Veillez à respecter ce qui suit:
Attention
• Neregardezjamaisdirectement
lesoleil,unelumièreintenseou
lefaisceaulaser,avecletélémètre
laser Nikon.
Précautions
• Si vous n'utilisez pas le télémètre
laser Nikon, n'appuyez pas sur le
boutonPOWERON/Mesure.
• N'utilisezpasl'appareilen
marchant. Vous pourriez causer
des blessures ou une panne
en rencontrant un obstacle, en
touchant d'autres personnes, en
tombant ou par le biais d'autres
types d'accidents.
• Nelebalancezpasparla
bandoulière.Vouspourriez
toucher et blesser d'autres
personnes.
• Neposezpasl'appareildansdes
endroits instables. Ceci pourrait
causer des chutes et créer des
blessures ou des pannes.
Précautions avant utilisation

38 39
En
Fr
Es
Pt
En
Fr
Es
Pt
Stockage
• Delacondensationoudes
moisissures peuvent se former sur la
surface des lentilles en cas de forte
humidité.Pourcetteraison,rangez
le télémètre laser Nikon dans un
endroit frais et sec.
Aprèsutilisationunjourdepluieou
pendant la nuit, laissez le sécher
entièrementàtempérature
ambiante avant de le ranger dans un
endroit frais et sec.
SOINS ET ENTRETIEN
Lentilles
• Servez-vousd’unpinceaudouxnon
gras pour dépoussiérer la surface
des lentilles.
• Pourl'éliminationdetachesou
saletés comme les traces de doigts
de la surface des lentilles, essuyez
doucement avec un chiffon doux et
propre ou du papier pour lentilles
non gras de bonne qualité. Un peu
d’alcoolpur(nondénaturé)peut
être utilisé pour éliminer les taches
tenaces.L’emploideveloursoud’un
mouchoir en papiern’estpas
recommandé,parcequ’ils
pourraient rayer la surface des
lentilles. Un chiffon utilisé pour
nettoyerleboîtiernedoitpasêtre
réutilisé sur la surface des lentilles.
Boîtier principal
• Nettoyezlecorpsavecunchiffon
douxetpropreaprèsavoirretiré
soigneusementlespoussièresavec
unsoufflet*.N'utiliseznibenzène,
ni diluant, ni d'autres produits
nettoyants contenant des agents
organiques.
* Un soufflet est un élément de
nettoyage en caoutchouc qui
souffle de l'air par une petite buse.
PRECAUTIONS DE SECURITE
Précautions
• LetélémètrelaserNikonn'estpas
destiné à une utilisation sous-
marine.
• Lapluie,l'eau,lesableetlaboue
doivent être retirés de la surface
duboîtierdutélémètredèsque
possible au moyen d'un chiffon
doux et propre.
• NelaissezpasleLetélémètrelaser
dans une voiture par temps chaud
ouensoleillé,ouprèsd’unappareil
produisant de la chaleur. Cela
pourrait l'endommager ou affecter
son fonctionnement.
• NelaissezpasletélémètreLaser
Nikonàlalumièredirectedu
soleil. Les rayons UV et la chaleur
excessive peuvent affecter
son fonctionnement, voire
l'endommager.
• Encasdechangementde
températurebrutal,del’eaupeut
se condenser sur la surface des
lentillesduTélémètreLaserNikon.
N'utilisez pas l'appareil tant que la
condensation n'a pas disparu.
Précautions avant utilisation
Ce symbole indique que cette batterie doit être collectée
séparément.
Les mesures suivantes concernent uniquement les
utilisateurs européens.
• Cette batterie doit être jetée séparément dans un point
de collecte approprié. Ne la jetez pas dans une poubelle
réservée aux ordures ménagères.
• Pour plus d’ informations, contactez le détaillant ou les
autorités locales responsables de la gestion des ordures.
Symbole pour la collecte sélective applicable aux pays
européens
Symbole pour la collecte sélective applicable aux pays
européens
Ce symbole indique que ce produit doit être collectée
séparément.
Les mesures suivantes concernent uniquement les
utilisateurs européens.
• Ce produit doit être jetée séparément dans un point de
collecte approprié. Ne la jetez pas dans une poubelle
réservée aux ordures ménagères.
• Pour plus d’ informations, contactez le détaillant ou les
autorités locales responsables de la gestion des ordures.
• Plagedemesure:5-500mètres/6-550yards
• Télémètre6xde qualité supérieure avec traitements
multicouches
• OnutiliselesystèmePrioritéàlapremièrecible
• Une simple pression du bouton permet de lancer une
mesure continue d'environ 8 secondes
• Arrêtautomatique(aprèsenviron8secondes de
nonutilisation)
• Réglagepardéfautsur«Dernièreutilisation»
• Imperméable—Équivalent à une protection de classe
4JIS/IEC(IPX4)
• LaserEN/IECdeClasse1M,invisibleetsansdanger
pour les yeux
Le télémètre laser Nikon comporte un faisceau
laser invisible. Il mesure la durée d'un aller-retour
du faisceau laser de l'appareil à la cible. La portée
maximale de l'appareil dépend des conditions
environnementales et climatiques, de la couleur,
de la finition de surface, de la taille, de la forme et
d'autres caractéristiques propres à la cible.
Les conditions suivantes facilitent les mesures :
• Tempscouvert
• Cibledecouleurvive
• Cibleàsurfacetrèsréfléchissante
• Cibledegrandetaille
• Angled'incidencedulasersurlacibleprochede90
degrés
Les mesures prises dans les cas suivants peuvent
s'avérer imprécises ou erronées :
• Lacibleaunesurfaceréfléchissanteétroiteoude
petite taille
• Lacibleaunesurfaceréfléchissantediffuse
• Lacibleneréfléchitpaslerayonlaserautélémètre
• Lacibleaunesurfacetotalementréfléchissante
(verre, miroir, etc...)
• Ciblenoire
• Lacibleaunesurfaceétagée
• Tempsdeneige,pluieoubrouillard
• Lacibleestviséeàtraversunverre
• Lasurfaceréfléchissanteestviséedebiais
• Laciblebougeouvibre
• Unobstaclesedéplacedevantlacible
• Lacibleestunpland'eau
Caractéristiques principales
Other manuals for COOLSHOT 20
1
Table of contents
Languages:
Other Nikon Monocular manuals