Nilfisk-Advance Viper AS710R User guide

Use and maintenance
Operating guidelines AS710R/AS850R
September 2019
Disconnect battery charger
and store the cable in the
storage compartment located
under the seat.
Fill the solution tank with
fresh water and add low foam
detergent according to needs.
Install the squeegee and fix it
by using the two knobs.
Adjust squeegee angle
and blade pressure for
optimal water pick-up by
turning the adjustment
knob on the support.
Insert the operator key and
start the machine.
Adjust the maximum
speed with the speed
adjustment dial.
Adjust water level by pressing
+ or – button.
Use the Switch to change direction,
F= forward and R= reverse.
Switch brush motor button on.
Lower brush with the foot pedal. Lower the squeegee with the handle.
Solution level indicator is on
the side of the tank showing
current level.
Push the drive pedal to start cleaning.

Maintenance
Operating guidelines AS710R/AS850R
September 2019
Turn OFF the machine using
the key.
Empty and clean the recovery tank and float system. Empty solution tank.
Check and clean filter (weekly).
Press the brush click off button and inspect
the brush or pad.
Park the machine leaving the recovery tank
cover open.
Take the squeegee off, check and clean
the blades.
Hang the squeegee on the machine to dry.
Connect the battery charger cable to the machine and the wall socket.
Nilfisk, Inc.
9435 Winnetka Avenue North
Brooklyn Park, MN 55445
www.nilfisk.us
Phone [phone]
Fax [phone]
Nilfisk Canada Co.
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.nilfisk.ca
Phone [phone]
Fax [phone] © 2019 Nilfisk, Inc.
19958 08/2019