Ninebot KickScooter MAX User manual

This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non
contrôlé.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway
Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Approx. 15.5 mph (25 km/h)
Approx. 18.6 miles (30 km)
Approx. 15%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 5 h
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx.XX lbs (XX kg)
Diagram
1Specifications
2Certifications
3
EN
1
Ninebot KickScooter
F25 / F30 / F40
Product Manual
Manuel de Produit
Manual del producto
EN
FR
ES
Dashboard & Power Button
Bell
Handlebar Electronic Throttle
Snap Hook
Dashboard & Power Button
Safety Hook
Brake Lever
Headlight
Stem
Folding Mechanism
Quick Release Lever
Front Fork
Front Fender
Hub Motor
Charging Port
Footboard
Buckle
Rear Fender
Rear Light
Disc Brake
Kickstand
Battery Compartment
Power Button: Press the button to turn the KickScooter on and press, and hold the button for 3 seconds to turn the scooter off. When the
KickScooter is on, press the button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Speed Mode: Three modes available.
Error: The wrench icon indicates that the scooter has detected an error.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or is below
32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered to normal
range.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery level equals to 5 bars.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Speedometer
Bluetooth
Headlight
Temperature Indicator
Speed Mode
Error Display
Battery Level
Power Button
Model
Mode F25 F30 F40
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
18.6 mph (30 km/h)
18.6 mph (30 km/h)
ECO (Energy saving mode)
D (Standard mode)
S (Sport mode)
Product
Rider
Machine
Battery
Motors
Charger
Ninebot KickScooter
F25
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
5100 mAh
183 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
Approx. 15.5 mph (25 km/h)
Approx. 12.4 miles (20 km)
Approx. 10%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 3.5 h
66–220 lbs (30–100 kg)
14+ years
3’11”–6’6” (120–200 cm)
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx. XX lbs (XX kg)
Product
Rider
Machine
Battery
Motors
Charger
Features
Tire
Features
Tire
Ninebot KickScooter
F30
Approx. XX lbs (XX kg)
Approx. 18.6 mph (30 km/h)
Approx. 124.9 miles (40 km)
Approx. 20%
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
7650 mAh
275 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
66–265 lbs (30–120 kg)
14+ years
3’11”–6’6” (120–200 cm)
Approx. 6.5 h
0.35 kW, 350 W
10200 mAh
367 Wh
F40
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non
contrôlé.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway
Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Approx. 15.5 mph (25 km/h)
Approx. 18.6 miles (30 km)
Approx. 15%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 5 h
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx.XX lbs (XX kg)
Diagram
1Specifications
2Certifications
3
EN
1
Ninebot KickScooter
F25 / F30 / F40
Product Manual
Manuel de Produit
Manual del producto
EN
FR
ES
Dashboard & Power Button
Bell
Handlebar Electronic Throttle
Snap Hook
Dashboard & Power Button
Safety Hook
Brake Lever
Headlight
Stem
Folding Mechanism
Quick Release Lever
Front Fork
Front Fender
Hub Motor
Charging Port
Footboard
Buckle
Rear Fender
Rear Light
Disc Brake
Kickstand
Battery Compartment
Power Button: Press the button to turn the KickScooter on and press, and hold the button for 3 seconds to turn the scooter off. When the
KickScooter is on, press the button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Speed Mode: Three modes available.
Error: The wrench icon indicates that the scooter has detected an error.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or is below
32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered to normal
range.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery level equals to 5 bars.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Speedometer
Bluetooth
Headlight
Temperature Indicator
Speed Mode
Error Display
Battery Level
Power Button
Model
Mode F25 F30 F40
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
18.6 mph (30 km/h)
18.6 mph (30 km/h)
ECO (Energy saving mode)
D (Standard mode)
S (Sport mode)
Product
Rider
Machine
Battery
Motors
Charger
Ninebot KickScooter
F25
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
5100 mAh
183 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
Approx. 15.5 mph (25 km/h)
Approx. 12.4 miles (20 km)
Approx. 10%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 3.5 h
66–220 lbs (30–100 kg)
14+ years
3’11”–6’6” (120–200 cm)
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx. XX lbs (XX kg)
Product
Rider
Machine
Battery
Motors
Charger
Features
Tire
Features
Tire
Ninebot KickScooter
F30
Approx. XX lbs (XX kg)
Approx. 18.6 mph (30 km/h)
Approx. 124.9 miles (40 km)
Approx. 20%
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
7650 mAh
275 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
66–265 lbs (30–120 kg)
14+ years
3’11”–6’6” (120–200 cm)
Approx. 6.5 h
0.35 kW, 350 W
10200 mAh
367 Wh
F40
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non
contrôlé.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway
Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Approx. 15.5 mph (25 km/h)
Approx. 18.6 miles (30 km)
Approx. 15%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 5 h
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx.XX lbs (XX kg)
Diagram
1Specifications
2Certifications
3
EN
1
Ninebot KickScooter
F25 / F30 / F40
Product Manual
Manuel de Produit
Manual del producto
EN
FR
ES
Dashboard & Power Button
Bell
Handlebar Electronic Throttle
Snap Hook
Dashboard & Power Button
Safety Hook
Brake Lever
Headlight
Stem
Folding Mechanism
Quick Release Lever
Front Fork
Front Fender
Hub Motor
Charging Port
Footboard
Buckle
Rear Fender
Rear Light
Disc Brake
Kickstand
Battery Compartment
Power Button: Press the button to turn the KickScooter on and press, and hold the button for 3 seconds to turn the scooter off. When the
KickScooter is on, press the button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Speed Mode: Three modes available.
Error: The wrench icon indicates that the scooter has detected an error.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or is below
32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered to normal
range.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery level equals to 5 bars.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Speedometer
Bluetooth
Headlight
Temperature Indicator
Speed Mode
Error Display
Battery Level
Power Button
Model
Mode F25 F30 F40
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
18.6 mph (30 km/h)
18.6 mph (30 km/h)
ECO (Energy saving mode)
D (Standard mode)
S (Sport mode)
Product
Rider
Machine
Battery
Motors
Charger
Ninebot KickScooter
F25
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
5100 mAh
183 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
Approx. 15.5 mph (25 km/h)
Approx. 12.4 miles (20 km)
Approx. 10%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 3.5 h
66–220 lbs (30–100 kg)
14+ years
3’11”–6’6” (120–200 cm)
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx. XX lbs (XX kg)
Product
Rider
Machine
Battery
Motors
Charger
Features
Tire
Features
Tire
Ninebot KickScooter
F30
Approx. XX lbs (XX kg)
Approx. 18.6 mph (30 km/h)
Approx. 124.9 miles (40 km)
Approx. 20%
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
7650 mAh
275 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
66–265 lbs (30–120 kg)
14+ years
3’11”–6’6” (120–200 cm)
Approx. 6.5 h
0.35 kW, 350 W
10200 mAh
367 Wh
F40
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non
contrôlé.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway
Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Approx. 15.5 mph (25 km/h)
Approx. 18.6 miles (30 km)
Approx. 15%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 5 h
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx.XX lbs (XX kg)
Diagram
1Specifications
2Certifications
3
EN
1
Ninebot KickScooter
F25 / F30 / F40
Product Manual
Manuel de Produit
Manual del producto
EN
FR
ES
Dashboard & Power Button
Bell
Handlebar Electronic Throttle
Snap Hook
Dashboard & Power Button
Safety Hook
Brake Lever
Headlight
Stem
Folding Mechanism
Quick Release Lever
Front Fork
Front Fender
Hub Motor
Charging Port
Footboard
Buckle
Rear Fender
Rear Light
Disc Brake
Kickstand
Battery Compartment
Power Button: Press the button to turn the KickScooter on and press, and hold the button for 3 seconds to turn the scooter off. When the
KickScooter is on, press the button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Speed Mode: Three modes available.
Error: The wrench icon indicates that the scooter has detected an error.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or is below
32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered to normal
range.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery level equals to 5 bars.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Speedometer
Bluetooth
Headlight
Temperature Indicator
Speed Mode
Error Display
Battery Level
Power Button
Model
Mode F25 F30 F40
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
18.6 mph (30 km/h)
18.6 mph (30 km/h)
ECO (Energy saving mode)
D (Standard mode)
S (Sport mode)
Product
Rider
Machine
Battery
Motors
Charger
Ninebot KickScooter
F25
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
5100 mAh
183 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
Approx. 15.5 mph (25 km/h)
Approx. 12.4 miles (20 km)
Approx. 10%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 3.5 h
66–220 lbs (30–100 kg)
14+ years
3’11”–6’6” (120–200 cm)
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx. XX lbs (XX kg)
Product
Rider
Machine
Battery
Motors
Charger
Features
Tire
Features
Tire
Ninebot KickScooter
F30
Approx. XX lbs (XX kg)
Approx. 18.6 mph (30 km/h)
Approx. 124.9 miles (40 km)
Approx. 20%
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
7650 mAh
275 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
66–265 lbs (30–120 kg)
14+ years
3’11”–6’6” (120–200 cm)
Approx. 6.5 h
0.35 kW, 350 W
10200 mAh
367 Wh
F40
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non
contrôlé.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway
Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Approx. 15.5 mph (25 km/h)
Approx. 18.6 miles (30 km)
Approx. 15%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 5 h
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx.XX lbs (XX kg)
Diagram
1Specifications
2Certifications
3
EN
1
Ninebot KickScooter
F25 / F30 / F40
Product Manual
Manuel de Produit
Manual del producto
EN
FR
ES
Dashboard & Power Button
Bell
Handlebar Electronic Throttle
Snap Hook
Dashboard & Power Button
Safety Hook
Brake Lever
Headlight
Stem
Folding Mechanism
Quick Release Lever
Front Fork
Front Fender
Hub Motor
Charging Port
Footboard
Buckle
Rear Fender
Rear Light
Disc Brake
Kickstand
Battery Compartment
Power Button: Press the button to turn the KickScooter on and press, and hold the button for 3 seconds to turn the scooter off. When the
KickScooter is on, press the button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Speed Mode: Three modes available.
Error: The wrench icon indicates that the scooter has detected an error.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or is below
32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered to normal
range.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery level equals to 5 bars.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Speedometer
Bluetooth
Headlight
Temperature Indicator
Speed Mode
Error Display
Battery Level
Power Button
Model
Mode F25 F30 F40
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
18.6 mph (30 km/h)
18.6 mph (30 km/h)
ECO (Energy saving mode)
D (Standard mode)
S (Sport mode)
Product
Rider
Machine
Battery
Motors
Charger
Ninebot KickScooter
F25
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
5100 mAh
183 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
Approx. 15.5 mph (25 km/h)
Approx. 12.4 miles (20 km)
Approx. 10%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 3.5 h
66–220 lbs (30–100 kg)
14+ years
3’11”–6’6” (120–200 cm)
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx. XX lbs (XX kg)
Product
Rider
Machine
Battery
Motors
Charger
Features
Tire
Features
Tire
Ninebot KickScooter
F30
Approx. XX lbs (XX kg)
Approx. 18.6 mph (30 km/h)
Approx. 124.9 miles (40 km)
Approx. 20%
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
7650 mAh
275 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
66–265 lbs (30–120 kg)
14+ years
3’11”–6’6” (120–200 cm)
Approx. 6.5 h
0.35 kW, 350 W
10200 mAh
367 Wh
F40
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non
contrôlé.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway
Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Approx. 15.5 mph (25 km/h)
Approx. 18.6 miles (30 km)
Approx. 15%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 5 h
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx.XX lbs (XX kg)
Diagram
1Specifications
2Certifications
3
EN
1
Ninebot KickScooter
F25 / F30 / F40
Product Manual
Manuel de Produit
Manual del producto
EN
FR
ES
Dashboard & Power Button
Bell
Handlebar Electronic Throttle
Snap Hook
Dashboard & Power Button
Safety Hook
Brake Lever
Headlight
Stem
Folding Mechanism
Quick Release Lever
Front Fork
Front Fender
Hub Motor
Charging Port
Footboard
Buckle
Rear Fender
Rear Light
Disc Brake
Kickstand
Battery Compartment
Power Button: Press the button to turn the KickScooter on and press, and hold the button for 3 seconds to turn the scooter off. When the
KickScooter is on, press the button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Speed Mode: Three modes available.
Error: The wrench icon indicates that the scooter has detected an error.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or is below
32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered to normal
range.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery level equals to 5 bars.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Speedometer
Bluetooth
Headlight
Temperature Indicator
Speed Mode
Error Display
Battery Level
Power Button
Model
Mode F25 F30 F40
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
15.5 mph (25 km/h)
15.5 mph (25 km/h)
9.3 mph (15 km/h)
18.6 mph (30 km/h)
18.6 mph (30 km/h)
ECO (Energy saving mode)
D (Standard mode)
S (Sport mode)
Product
Rider
Machine
Battery
Motors
Charger
Ninebot KickScooter
F25
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
5100 mAh
183 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
Approx. 15.5 mph (25 km/h)
Approx. 12.4 miles (20 km)
Approx. 10%
Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
14–104°F (-10–40°C)
14–122°F (-10–50°C)
IPX5
Approx. 3.5 h
66–220 lbs (30–100 kg)
14+ years
3’11”–6’6” (120–200 cm)
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm)
Approx. XX lbs (XX kg)
Product
Rider
Machine
Battery
Motors
Charger
Features
Tire
Features
Tire
Ninebot KickScooter
F30
Approx. XX lbs (XX kg)
Approx. 18.6 mph (30 km/h)
Approx. 124.9 miles (40 km)
Approx. 20%
Item Parameter
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Payload
Recommended Age
Required Height
Max. Speed
Typical Range[1]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Nominal Energy
Battery Management System
Output Power
Input Voltage
Max. Output Voltage
Rated Output
Brake Light
Riding Modes
Tire Pressure
Tires
45 psi
Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without nozzle
LED Rear Light
Energy saving mode, Standard mode and Sport mode
0.07 kW, 70 W
100–240 V~
42 V
41 V , 1.7 A
Nominal Power 0.3 kW, 300 W
36 V
42 V
32–104°F (0–40°C)
7650 mAh
275 Wh
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
66–265 lbs (30–120 kg)
14+ years
3’11”–6’6” (120–200 cm)
Approx. 6.5 h
0.35 kW, 350 W
10200 mAh
367 Wh
F40
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

www.segway.com
CE.00.0042.31-A
The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any
time. Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials. You must install the app,
activate your KickScooter, and obtain the latest updates and safety instructions.
Le fabricant se réserve le droit d'apporter des modifications au produit, de publier des mises à jour du microprogramme et de
réviser ce manuel à tout moment. Visitez www.segway.com ou consultez l'application Segway-Ninebot pour télécharger les
derniers contenus utilisateur. Vous devez installer l'application, activer votre KickScooter et obtenir les dernières mises à jour et
consignes de sécurité.
El fabricante se reserva el derecho a realizar cambios en el producto, actualizaciones del firmware y modificaciones de este
manual en cualquier momento. Visita www.segway.com o revisa la app para descargar los materiales de usuario más recientes.
Debes instalar la aplicación Segway-Ninebot, activar tu KickScooter y obtener las actualizaciones e instrucciones de seguridad
más recientes.
EN
FR
ES
EN The pictures shown are for illustration purposes only. The actual product may vary.
FR La photo est pour référence seulement. Veuillez vous référer au produit réel pour plus de détails.
ES La imagen es solo de referencia. Remítase al producto en sí para ver más detalles.