Equipmed Easy-roller knee scooter User manual

Easy-Roller Knee Scooter

User Manual

[Revision 3.0 October 2018]

READ THIS MANUAL CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE – FAILURE TO DO SO

MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • Products covered by this manual

may vary in appearance, assembly, inclusions, specifications, description and packaging.

Easy-Roller Knee Scooter

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you

do not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you

do not follow instructions.

You CAN be INJURED if you

do not follow instructions or

equipment damage may occur.

It is important that you read and

understand the instruction manual before

use and keep the manual in a safe place

for future reference. Safety information

presented here is generic in nature – some

advice may not be applicable to every

piece of equipment.

All safety precautions must be observed to

reduce the risk of personal injury when

operating the equipment.

The term “equipment" refers to your

product, be it electrical mains, battery or

petrol engine powered.

IMPORTANT – Handle the equipment

safely and carefully.

BEFORE USE - If you are not familiar with

the safe operation/handling of this

equipment, or are in any way unsure of any

aspect of suitability or correct use it for

your application, you should complete

training conducted by a person or

organization qualified in safe use and

operation of this equipment, including

fuel/electrical handling and safety.

WARNINGS

•Read all safety warnings and all

instructions. Failure to follow warnings

and instructions may result in electric

shock, fire and/or serious injury.

•Never run a combustion engine in

confined areas.

•Do not operate the equipment in

flammable or explosive environments,

such as in the presence of flammable

liquids, gases or dust. Engine and

equipment may create sparks or heat

that may ignite vapours, dust etc

•Keep clear of moving parts.

•This equipment may be a potential

source of electric shock if misused.

•Do not operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

•Do not allow others to use the

equipment unless they have read this

manual and are adequately trained.

•When using the equipment, basic

safety precautions detailed here must

always be followed to reduce the risk

of fire, electric shock, personal injury

and material damage.

•When wiring electrically powered

equipment, follow all electrical and

safety codes.

•Ensure all power sources conform to

equipment voltage requirements and

are disconnected before connecting

equipment.

General Work Area Safety

Work areas should be clean and well it.

Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

Personal Safety

Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

Prevent unintentional starting of the

equipment - ensure equipment and power

source switches are in the OFF position

before connecting or moving the

equipment. Do not carry equipment with

hands/fingers touching any controls.

Remove any tools or other items that are

not a part of the equipment from it before

starting or switching on.

Stay alert and use common sense when

operating equipment. Do not overreach.

Keep proper footing and balance at all

times. Do not use equipment when tired or

under the influence of drugs, alcohol or

medication. This equipment is not intended

for use by persons with reduced physical,

sensory or mental capabilities.

You must wear appropriate protective

equipment when operating, servicing, or

when in the operating area of the

equipment to help protect from serious

injury, including eye injury, inhalation of

toxic fumes, burns, and hearing loss.

Always wear eye protection. Protective

equipment such as respirators, non-skid

safety shoes, hard hat, hearing protection

etc should be used for appropriate

conditions. Other people nearby should

also wear appropriate personal protective

equipment. Do not wear loose clothing or

jewellery, which can be caught in moving

parts. Keep hair and clothing away from

the equipment.

If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

General Equipment Use and Care

Do not force the equipment. Use the

correct equipment for your application. The

correct equipment will perform better and

be safer within its design parameters. Do

not use the equipment if the ON/OFF

switch malfunctions – any equipment that

cannot be controlled with the ON/OFF

switch isdangerous and must be repaired.

Use the equipment and accessories etc. in

accordance with these instructions, taking

into account working conditions and the work

to be performed. Using the equipment for

operations different from those intended

could result in hazardous situations.

Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by an

authorized service centre or technician before

use.

Always keep the equipment and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment, controls

and handles dry and free from dirt, oil and

grease.

Store the equipment out of reach of children

or untrained persons. To avoid burns or fire

hazards, let the equipment cool completely

before transporting or storing. Never place

the equipment in places where there are

flammable materials, combustible gases or

combustible liquids etc.

The equipment is not weatherproof, and

should not be stored in direct sunlight, at high

ambient temperatures or locations that are

damp or very humid.

Product Use and Care

WARNING!

This product may feature one or more or a

combination of; nuts, bolts, screws, clips,

fasteners and/or locking, fixing or safety

mechanisms. These items/mechanisms

require checking/inspection to ensure they

are tight or correctly secured and are

operating correctly. Failure to adequately

check this product before each use may

result in serious injury due to fall, loss of

control, loss of balance, loss of footing,

tripping, crushing and/or impact. Additionally,

regular inspection/servicing should be

performed by a person who is qualified and

competent in servicing this product - intervals

will vary depending on product usage.

Consult a qualified person to determine

inspection/service intervals after

communicating details of your usage to them.

Easy-Roller Knee Scooter

Table of Contents

Safety...................................................................................................................................................2

Assembly ............................................................................................................................................4

Specifications.....................................................................................................................................7

Easy-Roller Knee Scooter

Assembly

Step 1: Unpack

1. Unpack the knee walker from the carton.

2. The knee walker has 4 parts, please refer to the picture below:

EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED EQUIPMED

Easy-Roller Knee Scooter

Step 2: Assemble the Knee Walker Frame

1. Attached the front frame together with the rear frame.

2. The snap button will come out.

3. Then fasten the star screw.

Step 3: Lock the Front Frame

Rotate the lever clockwise to tighten the quick release clamp and pull the quick release clamp down to point

towards the frame tubing to lock it securely (clockwise to tighten, counter clockwise to loosen).

Step 4: Adjust Height of Handlebars

Handlebars should be set at wrist level to keep your back straight.

1. Remove star screw.

2. Extend handlebars up to desired height, align holes in tiller.

3. Then, insert star screw through the steering tiller.

4. Tighten knob securely.

Easy-Roller Knee Scooter

Step 5: Adjust Height of Knee Platform

1. Remove the star screw.

2. Insert the knee walker platform post.

3. Extend the knee platform to desired height.

4. Then, insert star screw and tighten knob securely.

Step 6: Adjust the Brakes

1. Use an Allen wrench to loosen the hand lever and reposition and re-tighten to a comfortable position.

2. The brake tightness can be adjusted with the nuts at either end of the brake cable. Turning the screw

clockwise will loosen the brake and turning the screw counter clockwise will tighten it.

Step 7: Attach the Basket

1. Take the basket out.

2. Hang on the basket to the frame.

Easy-Roller Knee Scooter

Step 8: Operating the Knee Walker

1. Place your hands on the handlebars.

2. Place the injured leg comfortably resting on the centre of the knee platform.

3. Release the brake to move yourself forward or backward slowly with small steps with your other leg,

keeping the knee of your injured foot centred on the knee platform.

4. The Knee Walker can make turns by simply moving the handlebars with a minimum amount of effort.

Turns should only be performed while at a slow rate of movement. To turn right, rotate handlebars to the

right. To turn left, rotate handlebars to the left.

5. With practice, you should be able to move forward without deviating to the opposite side.

Specifications

Max loading 136kg

Frame Steel

Wheels PVC

Handlebar height 860-1010mm

Knee Pad Polyurethane

Knee Pad Height 490mm - 590mm

Note: Requires minimal assembly

Easy-Roller Knee Scooter

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety

Consult all documentation, packaging

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.

Before each use, check the product for

loose/broken/damaged/missing parts,

wear or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear or leaks.

Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.

Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.

The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business

or employee, or financially affect the user, business or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement or service by a technician

may cause financial loss, loss of employee time or an

inconvenience requiring compensation.

If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Other equipmed Scooter manuals

equipmed

equipmed FreeRoam II User manual

equipmed

equipmed FreeRoam User manual

Popular Scooter manuals by other brands

KYMCO

KYMCO 50 AGILITY CITY 4T Specifications

Rascal

Rascal Vecta Sport Owners manual & service record

Stark Products

Stark Products BEWEGT MIT KOMFORT user manual

Xiaomi

Xiaomi Electric Scooter 3 Lite user manual

Mirage

Mirage Mirage PF6 user manual

APRILIA

APRILIA ATLANTIC 500 - 02-2002 PART4 manual

ESAL

ESAL ES 40 user manual

Shoprider

Shoprider Cadiz S-889SL user manual

Rollplay

Rollplay PJ MASKS SCOOTER Series Owner's manual and assembly instructions

GLOBBER

GLOBBER E-MOTION 14 Original instructions

Drive

Drive Spitfire EX 1320 owner's manual

Crivit

Crivit URBAN E-BIKE Y Instructions for use

Huffy

Huffy m0095 owner's manual

BMW

BMW Urban Hybrid E-Bike manual

Wow

Wow 774 user manual

Xplore

Xplore Mini user manual

Denver

Denver SEL-10370F Original manual

Denver Electronics

Denver Electronics DBO-6550 MK2 Original instruction

equipmed Easy-Roller Knee Scooter User manual

Popular Scooter manuals by other brands