Ninestars DZT-5-1S User manual

Step 1 - Remove all components
from the box
• Sensor Trash Can
• Removable Inner Bucket
Step 2 - Insert batteries
Open the Lid and remove the Inner Bucket. Locate
the battery compartment at the bottom of the base.
Press the tab on the battery cap as indicated and
carefully lift up to open. Insert four (4) HEAVY
DUTY "C" batteries. Insert batteries in accordance
with the positive (+) and negative (-) poles. To
close, insert side without clips first and push the
battery cap down. Make sure it clicks to ensure that
it’s securely fastened.
LED light indicators:
A. To turn ON the trash can: Turn the power switch into the “I” position and a flashing red
light will appear, which indicates the trash can is in sensor mode.
B. To open the lid: Waive above sensor, a solid green light will appear when the lid opens.
C. Lid Closing: A solid red light will appear when the lid is closing.
D. Low Battery: A flashing yellow light will appear when battery power is low. Please
replace batteries.
1. Align batteries according to the positive and negative poles.
2. Do not submerge the trash can into water because it is equipped with many electrical
components. The trash can may be wiped with a damp cloth.
3. Do not manually force the lid close; this can cause damage to the internal gears. If the
gears are damaged, the automatic lid will not function properly.
4. Replace used batteries in a timely manner to prevent battery acid leakage. Battery acid
may cause damage to the electrical components of the trash can.
5. Do not mix new and used batteries.
6. Do not place trash can in direct sunlight or a heavily moisturized environment.
7. Do not mix alkaline, standard (zinc-carbon), or rechargeable (NiCd, NiMH, etc) batteries.
Step 3 - Trash can set up
Once the batteries are installed, insert the Inner
Bucket into the container. The Inner Bucket is
leakproof and removable for easy cleaning. Using
trash bag is optional. To properly insert a bag, hold
the metal rings in upright position. Insert the trash
bag into the bucket and folding the upper rim of the
bag around the metal rings. Then place the metal
rings back into down position.
Step 4 - Turning the trash can On/Off
The power switch is located underneath the motion
sensor. When the switch is in the “I” position the
trash can is ON. When the switch is in the “O”
position the trash can is OFF.
Step 5 - Using the trash can
Place your hand or an object within inches of the
motion sensor (located on the lid). The lid will open
instantly. Once your hand or object is out of the
sensor range, the lid will close automatically within
seconds. The lid will remain open if the object stays
within the sensor range.
Warning
Troubleshooting
Note: If the above solutions do not correct the problem please contact Nine Stars Customer
Service.
Lid does not open
- Make sure the power is ON by turn the switch in “I” position.
- Check if the batteries are placed in correctly.
- Wipe the sensor with a dry cloth.
- Check to see if there are any objects within the sensor
area. If there are, remove them.
- Wipe sensor with dry cloth to insure the sensor is clean
and that there is no excess moisture on it.
-
Battery power is low. Replace the batteries. Do not mix new
and used batteries.
Lid does not close
Indicator light is
a constant Green
Lid opens slowly and
Indicator light flashing
yellow
Errors Solutions
Slide-in the
Inner Bucket
Power Switch
User’s Manual
MOTION SENSOR TRASH CAN
Model: DZT-5-1S
Introduction
Overview
Instruction
Technical Facts
Hands-Free
Automatic Lid
Removable Leakproof
Inner Bucket (Inside)
Infrared Motion
Detecting Sensor
LED Indicator Light
Power Saving On/Off
Switch (Underneath the
Motion Sensor)
Fingerprint Resistant
Stainless Steel Base
Capacity: 1.3 Gal / 5L
Battery Compartment
- Inner Bottom of the Base
(Fits 4 “C” Batteries
Not Included)
Patented Product
Model: DZT-5-1S
Note: This model is to be used in-doors at all times.
Battery
Compartment
Press/Push Down
as indicated
Thank you for choosing Nine Stars Motion Sensor trash can. As the leader in smart trash
can technology, we’re pleased to offer the most versatile, intuitive and reliable waste
solutions on the market. Our products are designed to fit seamlessly into any living space,
be easily maintained and effortlessly operated. Simply move an object or hand above the
strategically placed infrared motion sensor (located near the lip of the lid) and the lid will
open automatically. Once the object or the hand is out of the sensor range, the lid will close
automatically within seconds. We at Nine Stars use the highest quality materials and the
latest technology in our products to ensure reliable function and durability. Thank you again
for your business and we sincerely hope that you enjoy your unit.
Limited Warranty
Register Your Product
What does this Warranty cover?
- This warranty covers the electronic mechanism of the lid such as the computer chip,
motor, gear box and electrical circuits only.
How long does the coverage last?
- This warranty is valid two years from the date of purchase.
What will Nine Stars do?
- Nine Stars will fix or replace any defective or malfunctioning lid.
- Customer is responsible for returning the defective or malfunctioning lid (entire top unit of
the Trash Can) to Nine Stars. The customer is also responsible for shipping charges to
return the product to us. Nine Stars will pay for shipping charges back to the customer if
the lid is covered under our warranty program outlined in this document.
What does the warranty not cover?
- The base of the unit, battery caps (if applicable), liner rings (if applicable), inner bucket (if
applicable), or any problems with the automatic lid caused by abuse, misuse, or natural
disasters (such as earthquakes, floods and fires) are not covered.
- User’s modifications or alterations to Nine Stars products will void User’s Warranty.
- Only our authorized distributors will be covered under our warranty. We will NOT
warranty products purchased from auctions, auctioneers, discount/closeout stores.
How do you get service?
Follow these steps to be eligible for service under warranty
1. Register your product within 30 days of purchase. Register your product online at
www.ninestarsusa.com/register, an email will be sent to you as the confirmation.
Please reply with proof of purchase (such as a copy of original sales receipt) to
completed the product registration.
2. Return authorization is required, please make sure you contact Nine Stars before
sending your unit
3. If you have any technical questions or problems, please contact us via email:
How does state law apply?
- This warranty gives you specific legal rights and you may also have other rights that vary
from state to state.
Product registration is as easy as 3 steps:
Step 1 - Go to www.ninestarsusa.com/register
or scan the QR code
Step 2 - Complete the online form
Step 3 - A confirmation email will be sent to the registered
email. Reply with a proof of purchase (such as a
copy of original sales receipt) to completed the
product registration
All Nine Stars products are covered by a two-year warranty. Register your
product within 30 days of purchase.
Tel: 866.978-2778
Web: www.ninestarsusa.com
Email: [email protected]
Add.: 13505 Yorba Ave. Unit Y, Chino, CA 91710
CONTACT US:
Ninestarsusa
@NineStarsUSA
#NINESTARSUSA
FOLLOW US AT:
[ PRODUCT REGISTRATION ]

Producto patentado
Indicadores de luz LED:
A. Para encender la papelera: Aparecerá una luz ROJA fija y luego comenzará a
parpadear cuando la papelera esté en modo de espera.
B. Para abrir la tapa: Renuncie al sensor, aparecerá una luz VERDE sólida cuando se
abra la tapa.
C. Cierre de la tapa: Aparecerá una luz ROJA fija cuando la tapa se cierre.
D. Batería baja: la luz LED parpadeará en AMARILLO cuando la batería esté baja. Por
favor, reemplace las baterías.
Paso 3 - Basura puede configurar
Una vez que las baterías estén instaladas, inserte
el cubo interior en el contenedor. El cubo interior es
a prueba de fugas y extraíble para una fácil
limpieza. El uso de la bolsa de basura es opcional.
Para insertar correctamente una bolsa, mantenga
los anillos de metal en posición vertical. Inserte la
bolsa de basura en el cubo y doble el borde
superior de la bolsa alrededor de los anillos de
metal. Luego coloque los anillos de metal de nuevo
en posición hacia abajo.
Paso 4 - Encender / Apagar el bote de
basura
El “Interruptor de encendido” se encuentra debajo
del sensor de movimiento. Cuando el interruptor
está en la posición "I", la alimentación está en
"ON". Aparecerá una luz roja fija y comenzará a
parpadear para indicar que el bote de basura está
en modo de espera y listo para usar. Para girar el
apagar, simplemente gire el interruptor a la
posición "O".
Paso 1 - Retire todos los componentes
de la caja
• Sensor de basura
• Cubo interior extraíble
Paso 2: Inserte las baterías
Abra la tapa y retire el cubo interior. Localice el
compartimiento de la batería en la parte inferior del
contenedor. Presione la pestaña de la tapa de la
batería como se indica y levántela con cuidado
para abrirla. Inserte cuatro (4) baterías "C". Inserte
las pilas de acuerdo con los polos positivo (+) y
negativo (-). Para cerrar, inserte el lado con los
dientes primero y presione la tapa de la batería
hacia abajo. Asegúrese de que haga clic para
asegurarse de que esté bien sujeto.
1. Alinee las baterías de acuerdo con los polos positivo y negativo.
2. No sumerja la basura en agua porque está equipada con muchos componentes
eléctricos. La basura puede limpiarse con un paño húmedo o bajo agua corriente
durante un tiempo corto.
3. No fuerce la tapa de manera manual; esto puede causar daños a los engranajes
internos. Si los engranajes están dañados, la tapa automática no funcionará
correctamente.
4. Reemplace las baterías usadas de manera oportuna para evitar fugas de ácido de la
batería. El ácido de la batería puede dañar los componentes eléctricos del bote de
basura.
5. No mezcle pilas nuevas y usadas.
6. No coloque la basura en la luz directa del sol o en un ambiente altamente humectado.
7. No mezcle pilas alcalinas, estándar (zinc-carbono) o recargables (NiCd, NiMH, etc.).
Paso 5: Cómo usar el cubo de basura
Coloque su mano o un objeto a pulgadas de el
sensor de movimiento (ubicado en la tapa). La
tapa se abrirá al instante. Una vez que tu mano o
objeto está fuera del alcance del sensor de la tapa
cerrar en segundos.
Advertencia
Solución de problemas
Manual de Usuario
BOTE DE SENSOR
Modelo: DZT-5-1S
Introduccion
Visión de Conjunto
Tapa Automática
de Manos Libres
Cubo interior a prueba
de fugas (Dentro)
Movimiento infrarrojo
sensor de detección
Luz indicadora LED
Ahorro de energía de
encendido / apagado
(Debajo del sensor de
movimiento)
Capacidad de base de
plástico:
Capacidad: 1.3 Gal / 5L
Oculto compartimiento
de la batería en el fondo
del recipiente(Se adapta
a 4 baterías "C" No incluido)
Instrucciones
Hechos Técnicos
Modelo: DZT-5-1S
Nota: Este modelo es para uso interno solamente.
Nota: Si las soluciones anteriores no corrigen el problema, póngase en contacto con
Servicio de atención al cliente de Nine Stars Group USA Inc. Customer Service.
La tapa no se abre
- Asegúrese de que la alimentación esté ENCENDIDA
girando el interruptor en la posición "I".
- Limpie el sensor con un paño seco.
- Pulse el botón "cerrar" para restablecer la papelera.
- Compruebe si hay objetos Sobre el sensor. Si lo hay quiten lo.
- Si algo impide que la tapa se cierre puede restablecer la
basura, presione el botón "cerrar"
- La potencia de la batería es baja. Reemplace las pilas.
No mezcle pilas nuevas y usadas.
La tapa no cierra
La luz indicadora es una
constant Verde
La tapa se abre
lentamente y
El indicador parpadea
en Amarillo
Errors Soluciones
Deslice el cubo
interior
Ahorro de energía
de encendido /
apagado
Compartimiento
de batería
Presionar / Empujar
hacia abajo
como se indica
Gracias por elegir el bote de basura Nine Stars Sensor de movimiento. Como líder en
tecnología de bote de basura inteligente, nos complace ofrecer las soluciones de residuos
más versátiles, intuitivas y confiables del mercado. Nuestros productos están diseñados
para adaptarse perfectamente a cualquier espacio habitable, ser fáciles de mantener y
operar sin esfuerzo. Simplemente mueva un objeto o una mano sobre el sensor de
movimiento infrarrojo ubicado estratégicamente (ubicado cerca del borde de la tapa) y la
tapa se abrirá automáticamente. Una vez que el objeto o la mano están fuera del rango del
sensor, la tapa se cerrará automáticamente en segundos. En Nine Stars utilizamos
materiales de la más alta calidad y la última tecnología en nuestros productos para
garantizar un funcionamiento y una durabilidad confiables. Gracias nuevamente por su
negocio y esperamos sinceramente que disfrute de su unidad.
Garantía limitada
¿Qué es lo que esta garantia cubre?
- Esta garantía cubre el mecanismo electrónico de la tapa tal como el chip de computadora,
Motor, caja de cambios y circuitos eléctricos solamente.
¿Cuánto dura la cobertura?
- Esta garantía es válida dos años a partir de la fecha de compra.
¿Qué hará Nine Stars?
- Nine Stars reparará o reemplazará cualquier tapa defectuosa o que funcione mal.
- El cliente es responsable de devolver la tapa defectuosa o mal funcionamiento (parte
superior entera Unidad de la Papelera) a Nine Stars. El cliente también es responsable de
los gastos de envío para devolvernos el producto. Nine Stars pagará los gastos de envío
al cliente si la tapa está cubierta Bajo nuestro programa de garantía descrito en este
documento.
¿Qué no cubre la garantía?
- La base de la unidad, las tapas de la batería (si corresponde), los anillos del forro (si
procede), el buchet interior (si corresponde), O cualquier problema con la tapa automática
causada por abuso, mal uso o desastres naturales (Como terremotos, inundaciones e
incendios) no están cubiertos.
- La garantía se anula si se considera que las reparaciones fueron intentadas por cualquier
persona con excepción de Nine Stars que resultó en daños a la tapa automática.
- Sólo nuestros distribuidores autorizados estarán cubiertos bajo nuestra garantía.
Nosotros no Productos de garantía comprados de subastas, subastadores, tiendas de
descuento / cierre.
¿Cómo se obtiene el servicio?
Siga estos pasos para ser elegible para el servicio bajo garantía:
1.Registre su producto dentro de los 30 días de la compra. También puede ingresar en línea
en www.ninestarsusa.com/register, se le enviará un correo electrónico como
confirmación. Responda con el comprobante de compra (como una copia del recibo de
compra original) para completar el registro del producto.
2.Se requiere autorización de devolución, asegúrese de contactar a Nine Stars antes de enviar
su unidad
3.Si tiene preguntas o problemas técnicos, comuníquese con nosotros por correo
8:30 am a 5:30 pm PST
¿Cómo se aplica la ley estatal?
- Esta garantía le otorga derechos legales específicos y también puede tener otros
derechos que Varían de un estado a otro.
Tel: 866.978-2778
Web: www.ninestarsusa.com
Email: [email protected]
Add.: 13505 Yorba Ave. Unit Y, Chino, CA 91710
CONTACTANOS EN:
Ninestarsusa
@NineStarsUSA
SÍGUENOS EN:
Registre su producto
El registro del producto es tan fácil en 3 pasos:
Paso 1 -Ir a www.ninestarsusa.com/register
o escanear el código QR
Paso 2 -Complete el formulario en línea
Paso 3 -Se enviará un correo electrónico de confirmación al
correo electrónico registrado. Podrá completar una
prueba de compra (como una copia del recibo de
compra original) para completar el registro del
producto
Todos los productos de Nine Stars están cubiertos por una garantía de dos
años. Registre su producto dentro de los 30 días de la compra.
[ REGISTRACIÓN DEL PRODUCTO]
Table of contents
Languages:
Other Ninestars Home Improvement manuals