Quantum Genius Moving Straps User manual

1. Ensure that both users are wearing the harnesses correctly.
Adjust the pads to be comfortable on your shoulders.
2. Connect the chest strap on your harness. Adjust, if needed,
to t the width of your chest and shoulders.
6. Lift the furniture by bending your knees into the squat position,
keeping your back straight.
3. Connect the harness buckle to the carrying belt buckles. 4. Adjust the carrying belt length by pulling the strap through
the buckle.
5. After adjusting to a good length, you can keep excess strap
out of the way by bringing the end of the strap to the buckle
and placing the loop into the hook as shown above.
INSTRUCTIONS
Thank you for purchasing the Quantum Genius Moving Straps!
For your safety, you must carefully read and understand these
instructions before using the product.
Basic Instructions for Use
SAFETY NOTICE: Must be operated by two people.
Lifting heavy objects can result in serious injury. Take all
appropriate cautions and use the product as instructed.

4 Methods of Attaching the Carrying Belts
1. X Shape Method 2. Looped X Shape Method
3. Loop Method 4. Parallel Method
Step 1 - Loop the two carrying belts together and form
an ‘X’ shape on the ground, as pictured.
Step 2- Both users should buckle both ends of each belt
to their own harness.
Step 3 – Place the furniture on the belts in the center of
the ‘X’.
Step 4 – Adjust the length of each carrying belt to suit
both the height of the users and the size of the
furniture.
NOTE: This method only works for furniture that has four
sturdy legs.
Step 1 – Place both carrying belts on the ground to form
two separate‘U’shapes, as pictured.
Step 2 - Place furniture over both ‘U’shapes with the‘U’
around the legs of the furniture.
Step 3 – Both users should connect one of the side
buckles on the carrying belts to their harness.
Step 4 - Adjust the length of each carrying belt to suit
both the height of the users and the size of the furniture.
NOTE: This method only works for furniture that has
four sturdy legs.
Step 1 – First, each person should connect the end of
each carrying belt to their own harness and stand
opposite one another. This forms two parallel carrying
belts between the users.
Step 2 - Place the furniture over the two parallel
carrying belts, ensuring that the belts remain on the
inside of the furniture legs on both sides.
Step 3 - Adjust the length of each carrying belt to suit
both the height of the users and the size of the
furniture.
Step 1 - Lay two belts on ground in an ‘X’ shape. Place
the furniture on the belts in the center of the‘X’.
Step 2 - Both users should connect one of the side
buckles on the carrying belts to their harness straps.
Step 3 - Adjust the length of each carrying belt to suit
both the height of the users and the size of the
furniture.

1. Make sure to lift the piece of
furniture far enough o the ground
to ensure you don’t trip over it or get
it
caught on uneven ground.
3. Do not hold your arms too high when
guiding and supporting the furniture. If your
arms are too high,
the furniture will slide on the carrying straps
and the top person’s feet will be crowded
when they reach
the top of the stairs.
2. Squat low when placing the
carrying straps below the piece of
furniture. Then, adjust the straps to
ensure appropriate ground clearance
when you stand up.
4. Take care when carrying objects up the stairs.
Keep your arms at shoulder height and close to
your body,
as pic tured. Guide and support the furniture with
your hands.
5. If you do not squat low enough when
adjusting the straps, your feet will be crowded
by the furniture,
especially when going up or down stairs.
Safety Information
This product is designed only to lift, carry, or move furniture and similar objects.
Do not use this product for any other reasons other than those described in this manual.
Do not exceed your physical limits or abilities when carrying heavy objects. Each individual has
different limitations that must be considered before
We are not responsible for injuries that occur from misuse or failure to comply with reasonable
safety precautions.
Using Your Carrying Straps Correctly