NINGBO LONGMA VEHICLE INDUSTRY LM406 User manual

INSTRUCTION FOR USE
Congratulations on your purchase of the child seat.Please read this instruction
manual carefully before use.If you have any questions concerning the use of this
child seat,please do not hesitate to contact us.
WARNING:DO NOT place rear-facing child seat on front
seat with airbag.DEATH OR SERIOUS INJURY can occur.
CHILD RESTRAINT
LM406
SUITABLE FOR CHILDREN
LESS THAN 13 KG
GROUP 0+
NINGBO LONGMA VEHICLE INDUSTRY CO.,LTD.
Add:No.29 kandun East Road,Cixi,Avenue,Sansizao Village,
Kandun Sub-District,Cixi City,Zhejiang Province.
Tel:[phone] 23670083
Fax:[phone]
Http://www.loma-cardle.com
E-mall:[e-mail]
P.C:315303

1
1. Vital information-READ NOW................................. 1-2
2. Safety instruction...................................................3
3. Use safety seat in this way...................................... 3
4. Parts and interior equipment...................................4
5. Using the buckle.....................................................5
6. Adjust the harness.................................................. 5
7. Adjust the height of the shoulder harness..... ... ... . . ..6
8. Adjust the handle.....................................................7
9. Use of seat cotton pad...... ... ..... ... ... ..... ... ... ..... ... ... .. . 8
10. Installation of the child seat group 0+... .................. 8- 11
11. Remove the cover. ... ... ... ... ... ... ..... ... ... ... ..... ... ... ..... . 11-1 2
12. Maintenance and cleaning.....................................13
1. Th is i s a Unive rsal”chil d rest raint, it i s ap pro ved to Regul atio n NO.44 .04
series of amendments,for general use in vehicles and it will fit most,but not all,
car seats.
2. A correct fit is l ikely if t he vehi cle m anufact urer has declared in th e ve hicl e
handbook that the vehicle is capable of accepting a “Universal”child restraint
for this age group.
3. This ch ild restra int has been cl assif ied as“Univers al”unde r mo re stri nge nt
conditions than tho se which applied to earlier des igns which do not carry this
notic e.
4. If in doubt,consult either the child restraint manufacturer or the retailer.
“
Onl y s uitabl e i f th e vehi cle is fi tte d w ith 3- poi nt sa fe ty be lts , App rov ed t o
UN/ ECE Re gul ati on No .16 or ot her e qui val ent sta nda rds .
NOTICE
For your child’s safety, please read these instructions carefully before use and
keep them for future reference. Failure to follow the instructions contained in
this manual could result in serious injury to your child.
1.This child seat can only be used with the harness for children less than 13 kg
in weight (group 0+ ).
2.This instruction manual can be retained in the special space of the child seat for
its life period.
3.It shall be recommended that children are not left in their child restraint system
unattended.
4.Do not place rear-facing child seat on front seat with airbag. Death or serious
injury can occur.
5.The child seat should be changed when it has been subject to violent stresses in
an accident.
6.For the reason of safety, the child seat must be fixed inside the vehicle even if
you do not put your child inside the child seat.
7.Always make sure that any straps holding the seat restraint to the vehicle shall
be tight, any straps restraining the child should be adjusted to the child’s body,
and check that the straps shall not be twisted.
1. Vital information-READ NOW
LMSM21022300

2 3
8.Do not use any load bearing contact points other than those described
in the instructions and marked in the child restraint.
9.Any luggage or other objects liable to cause injuries in the event of a
collision shall be properly secured.
10.The rigid items and plastic parts of a child restraint must be so located
and installed that they are not liable,during everyday use of the vehicle
to become trapped by a moveable seat or in a door of the vehicle.
11.To prevent from the risk of fall,your child should always be fastened.
12.It is dangerous to make any alteration or additions to the device
without the approval of the competent authority,and a danger of not
following closely the installation instructions provided by the child
restraint manufacturer.
13.The child restraint must not be used without the cover.
14.The seat cover should not be replaced with any other than the one
recommended by the manufacturer,because the cover constitutes an
integral part of the restraint performance.
15.Before you adjust any movable or adjustable parts of your child seat,
you must remove your baby from the child seat.
16.The child seat should be kept away from sunlight if the seat is not
provided with a textile, otherwise it may be too hot for the child’s skin.
17.Never use a second-hand product,as you can vever be certain what
was happened to it.
18.Please identify unsatisfactory position of the adult safety belt buckle
relative to the correct point of the child safety seat, if in doubt, please
contact the child seat manufacturer.
2. Safety instruction
Only suitable if the approved vehicles
are fitted with 3 point safety-belts,
approved to UN/ECE Regulation
No.16 or other equivalent standards.
Forward facing traffic direction
Back facing traffic direction Error
Vehicle is only fitted with 2-point safety belt Error
Vehicle is fitted with 3-point safety belt Correct
Seat beside the driver Error
Rear seat Correct
Rear middle seats Three-point Belt Correct
Correct
3.1 Please carefully implement the Country Traffic Safety Regulations
NOTICE
You can install this position
Unable to install the position
Do not install the child safaty seat
at the front seat with air bag.
Only with th e three poi nt
safety bel t,can thi s location.
NOTICE:If the buckle strap of car
seat is too long, the child restraint
system can not be installed firmly.
It is very dangerous. If any doubt,
please consult the child restraint
system manufacturer.
3. Using safety seat in this way
too longtoo long
DIAGONAL BELT DIAGONAL BELT
LAP BELT LAP BELT

4 5
4.Parts and interior equipment
Button
Chest pad
Handle
Safety belt groove
Comfort pad
Harness
adjuster strap
Harness
Lying support
Canopy
Buckle
Harness
adjuster lever
Belt slot
Harness
T bar
Locking Method：
Align the left and right buckle tongues to one tongue
and insert into the buckle until you hear a“Click”.
Unlocking Method：
5. Using the buckle
You can press the red button of the buckle
the two metal sections will be pop up.
-Loosening the shoulder harness
Press the adjuster button under
the cover and at the same time pull
both shoulder straps forward.
Pull the adjuster strap until the
harness is fully tightened.
-Tightening the shoulder harness
6. Adjust the harness
: routing label
CLICK

6 7
10. Adjust the height of the shoulder harness and the headrest
Always check that the
shoulder straps are at
the correct height for
your child.
7. Adjust the height of the shoulder harness
If the height of your shoulder belts
in child car seat is not fit for your
child, adjust the height of the shoulder
belt, Please proceed as follows:
Step 1.
Step 2. Pull out the buckle tongues from
the chest pad and the slots on the cover .
and the shell then thread them into the
corresponding belt slots .
Release the buckle(a1)
(a2)
(a3)
Make sure that both of the shoulder
belts and chest belt go through slots
at the same height,and not twisted.
8. Adjusting the handle
You can engage the handle in four
positions:
Simultaneously press both buttons
on the handle.Then whilst holding
the buttons pressed turn the handle
backwards or forwards until it
engages in the desired position.
For placing your baby
into the baby seat
For setting the baby down
safely outside the car seat
For installed in the carFor carrying and
transporting baby
a2
a3
Right
Too high
Too low
a1

8 9
9. Use of seat cotton pad
NOTICE:Please use cushion for the child less than 9kgs
1 2
10. Installation of the child seat group 0+
喀哒
It is suitable for the weight 0-13 kg, given to children about 0-1 year old.
Step 1:Put the child into the seat
Step 2: Fasten the harness.Check
that the harness does not twisted.
Step 3: Pull the adjuster strap
until the harness is fully
tightened.
Step 4: Place the child seat on
the car seat rearward-facing
and make sure that the front
of the child seat is firmly pressed
against the car seat backrest.
A1
A2
A3
A4
Put cushion in child restraint system, and then adjust harness and cushion
following the picture
CLICK
Handle does not firmly
against car seat
The front of carrier does
not firmly against car seat
The handle and the font of
carrier firmly against the
car seat

10 11
11. Remove the cover
1
Step 6: Insert the seat belt insert
into the car seat belt buckle up
and hear "click(A7)
Notice: Belt part of car safety belt ，
It must pass over the child's legs.
Step 2: Release the buckle(B2)
A6
Belt slot Belt slot
Step 1: The canopy can be
removed by withdrawing
the awning strip from the
clamping groove with
tools(B1).
B1
3
CLICK
A7
Step 7: Pull car seat belt follow
the direction of red arrow and
make sure the belt is tight
enough(A8).
A8
B2
Step 5: 3-point car
seat belt
①②③(A5、A6、A7)
Pull out the
, through the belt route
slot of backrest follow the routine
1
2
A5
Notice:The lap belt section runs through both blue belt guides
on the baby seat,lie in the flute of both of both side,see the picture

12
12.1 Daily maintenance
1.In daily use,check periodically the child seat.The child seat should be
replaced after an accident.
2.Please keep this child seat in dry and ventilated place to avoid damp
moldy.
3.If the child seat becomes dusty,clean the seat belt and the plastic pieces
by swiping them with a damp sponge and let it dry naturally.
4.If food or drink drop accidently on the buckle,disassemble the seat belt
from the child seat and rinse it gently by warm water.Leave it dry naturally.
5.For cleaning the entire child seat fabric cover,please refer to the 12.2
washing instructions.
12.2 Washing instruction
Never use any solvant,chemical detergent or lubricant on any part of your
child seat.
Hand wash,
water
temperature
below 30℃
Do not bleach Dryclean,any
solvent except
trichloroethylene
Do not tumble dry Do not iron
12. Maintenance and cleaning
Step 5:Keep the removed cushion
and accessories well(B4).
Step 6:Pull all directions to take
out the cover(B5).
※Follow in reverse order and repeat
the procedure to put on the fabric cover
B4
B5
13
Step 3:Pull out the buckle tongues
from the chestpad and the slots
on the cover (B3)
a2
Step 4:Turn the harness locking
clip on their narrowest end and
thread it through the slot under
the bottom of the child seat.So
the crotch pad and buckle as
well as harness straps can be
removed(B3)
B3