NINGBO LONGMA VEHICLE INDUSTRY LM229 User manual

INSTRUCTION FOR USE
Congratulations on your purchase of the child seat.Please read this instruction
manual carefully before use.If you have any questions concerning the use of this
child seat,please do not hesitate to contact us.
CHILD RESTRAINT LM229
SUITABLE FOR CHILDREN
4 years to 12 years old
15~36KG
GROUP II,III
NINGBO LONGMA VEHICLE INDUSTRY CO.,LTD.
Add:#25-29 Kandun east Road, Cixi Avenue, Cixi City,
Ningbo, China.
Tel:0086-574-23881208 23670081
Fax:0086-0574-23670082
Http://www.loma-cardle.com
E-mall:sales@loma-cardle.com
P.C:315303

1 2
1.Vital information-READ NOW................................................................3-4
2. Safety instruction..................................................................................5
3. Using safety seat in this way....................................................................5
4. Parts and interior equipment..................................................................6
5. Assembling the seat................................................................................ 7
6. Installation of the seat.............................................................................8-15
6.1 3-point car seat belt installation.......................................................8-10
6.2 Isofit installation...........................................................................11-15
7. Remove the cover..................................................................................15-17
8. Maintenance and cleaning.....................................................................17
8 .1 Daily maintenance.........................................................................17
8 .2 Washing instruction.......................................................................17
Contents 1. This is a universal”and semi-uni ve rsal child rest raint, it is approve d to
Reg ulation NO.4 4,04 series of amendments,for general use in vehicles and
it will fit most,but not all,car seats.
2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle
handbook that the vehicle is capable of accepting a “Universal”child restraint
for this age group.
3. This child restraint has been classified as“Universal”under more stringent
conditions than those which applied to earlier designs which do not carry this
notice.
4. If in doubt,consult either the child restraint manufacturer or the retailer.
“ “ ”
Notice
!
This child restraint is classified for”(Semi-universal)”use and is suitable
for fixing into the seat positions of the following cars:
CAR FRONT REAR
Outer Outer Centre
Yes NO NO
Seat positions in other cars may also be suitable to accept this child restraint.If
in doubt,consult either the child restraint manufacturer or the retailer.
*
On l y s u i ta b l e i f t h e v eh ic l e i s f i t ted wi th 3- po i nt sa f e ty be lt s , Ap pro v ed to
UN / EC E Re g u l at i o n N o . 1 6 o r o th er eq ui v al e nt sta n d a rd s .
LMSM19042401

3 4
To prevent from the risk of fall,your child should always be fastened.12.
13.
14.
15.
16.
17.
18.
19.
20.Notice:
It is dangerous to make any alteration or additions to the device without the
approval of the competent authority,and a danger of not following closely the
installation instructions provided by the child restraint manufacturer.
This child safety seat is designed for children from 9 to 36 kg.Never overload
the child safety seat more than one child or with other loads.
The child restraint must not be used without the cover.
The seat cover should not be replaced with any other than the one recommended
by the manufacturer,because the cover constitutes an integral part of the restraint
performance.
Before you adjust any movable or adjustable parts of your child safety seat,you
must remove your baby from the child safety seat.
The child safety seat should be kept away from sunlight if the seat is not provided
with a textile,otherwise it may be too hot for the child’s skin.
Never use a second-hand product,as you can never be certain what was happened
to it.
Do not use in any configuration not shown in the instructions.
1. Vital information-READ NOW
For your child’s safety,please read these instructions carefully before use and keep
them for future reference.Failure to follow the instructions contained in this manual
could result in serious injury to your child.
This child safety seat can only be used with the harness for children 15kg to 36kg
in weight( group I, 15-36 kg).
This instruction manual can be retained in the special space of the child seat for its
life period.
1.
2.
I III:
Do not use this child safety seat at the home. It has not been designed for home use
and should only be used in your car.
The child safety seat should be changed when it has been subject to violent stresses
in an accident.
Always make sure that any straps holding the seat restraint to the vehicle shall
be tight,any straps restraining the child should be adjusted to the child’s body,and
check that the straps shall not be twisted.
IMPORTANT!Ensuring that any lap straps is worn low down,so that the pelvis is
firmly engaged.
Do not use any load bearing contact points other than those described in the
instructions and marked in the child restraint ,when in doubt ,please contact the
child restraint manufacturer..
Any luggage or other objects liable to cause injuries in the event of a collision
shall be properly secured.
The rigid items and plastic parts of a child restraint must be so located and installed
that they are not liable,during everyday use of the vehicle to become trapped by a
moveable seat or in a door of the vehicle.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Never leave your child unattended in the child restraint system even for a short time.
This child restraint should be securely belted in the vehicle even when not in use.
In a crash or sudden stop,an unsecured child safety seat may injure other occupants.

5 6
Isofit unlock button Isofit folding button
Manual bag
Isofit connector
Isofix guide
Belt slot label
Height adjuster
Head belt guide
4. Parts and interior equipment
Headrest
Backrest
Base
Safety belt
route slot
2. Safety instruction
3. Using safety seat in this way
Isofit hiden slot
Only suitable if the approved vehicles are fitted
with 3 point safety-belts,approved to UN /EC E
Re gu lat ion No. 16 or o the r equivalent
standards.
Forward facing traffic direction
Back facing traffic direction Error
Vehicle is only fitted with 2-point safety belt Error
Vehicle is fitted with 3-point safety belt Correct
Seat beside the driver Error
Rear seat Correct
Rear middle seats Three-point Belt Correct
Correct
3.1 Please carefully implement the Country Traffic Safety Regulations
NOTICE
You can install this position
Unable to install the position
Do not install the child safaty seat
at the front seat with air bag.
Only with the three point
safety belt,can this location.
DIAGONAL BELT
DIAGONAL BELT
LAP BELT
LAP BELT
NOTICE:If the buckle strap of car seat is too
long, the child restraint system can not be
installed firmly. It is very dangerous. If any
doubt, please consult the child restraint
system manufacturer.

5. Assembling the seat
7 8
A1
A2
A3
Suitable for the child from 15 to 36kgs(4-12years)
B1
B2
6.1 3-point car seat belt installation
Step1: Press the button on the bottom and
turn isofit connector to hide.
B3
Step 3:Gently keep pressure on hooks
as you lift backrest up.
DO NOT FORCE MAY CAUSE
DAMAGE.
WARNING:
Step 1:Align base and backrest in a
straight line.
Step 2:Place backrest hooks inside
base securely.
Step 2: Place the baby car seat on the
vehicle's seat.
6. Installation of the seat

9 10
B6
B7
B8
B
A
C
B4
B5
Step 4: Put the child in the seat and
follow B4 routine.
Step 5: Adjust the height of headrest
and belt slot to suitable height of
child(B6、 )B7
Step 6:Fasten car seat belt and
make sure, it is tight enough.
If car seat belt is too
long, it is not suitable to tighten
baby car seat. When in impact,
it will not work. Please check if
car seat is suitable before using
baby car seat.
Notice:
!
Step 3:Follow the B4 routine to install
the baby car seat. Too high Right
Too low
CLICK

11 12
6.2 Isofit installation
Step 1:Turn the seat to the bottom
and pull out isofit connector.(C1、C2)
C1
C2
C3
C4
C5
C6
Step 5: Push child seat follow the
direction and insert isofit connector
into isofix guide.
Step 2:Turn isofit connector to 180
degrees..(C3)
Step 3:Find out isofix connections
in the car.
Step 4: Insert isofix guide into
isofix connection

14
13
Step 6: Check if isofit locking system
turns to green and make sure child
seat is firmly connected.
C7
C8
Step 8: Pull car seat belt follow
the belt route and lock.
C10
C11
C9
A
BC
C12
Step 10:Fasten car seat belt and
make sure, it is tight enough.
If car seat belt is too long, it is not suitable to tighten baby car seat.
When in impact, it will not work. Please check if car seat is suitable before using
baby car seat.
Notice:
!
Step 9: Adjust the height of headrest
and belt slot to suitable height of
child(C10、 )C11
Step 7: Put the child into the safety
car seat.
Too high Right
Too low

15 16
D3
D1
D2
D4
C13
C14
Step 4:
out the cover
Pull all directions to take
(D4).
Step 1:Turn the seat to the back and
unlock the snap fastener.
Step 11: Pull child seat forward and slide
the locking system. When you hear “click”
and it turns to red, isofit connector is
released.
Step 12: Take child seat away from car seat.
Step 2:Push backrest to make it
separate from booster
Step 3:Take off the elastic of fabric
cover.
7. Remove the cover

17
Step 5: Take off the fabric cover.
D5
8. Maintenance and cleaning
8.1 Daily maintenance
1. In daily use,check periodically the child seat.The child seat should be replaced
after an accident.
2. Please keep this child seat in dry and ventilated place to avoid damp moldy.
3. If the child seat becomes dusty,clean the seat belt and the plastic pieces by
swiping them with a damp sponge and let it dry naturally.
4. If food or drink drop accidently on the buckle,disassemble the seat belt from
the child seat and rinse it gently by warm water.Leave it dry naturally.
5. For cleaning the entire child seat fabric cover,please refer to the 8.2 washing
instructions.
8.2 Washing instruction
Never use any solvant,chemical detergent or lubricant on any part of your
child seat.
Hand wash,
water
temperature
below 30℃
Do not bleach Dryclean,any
solvent except
trichloroethylene
Do not tumble dry Do not iron
※
repeat the procedure to put on
the fabric cover
Follow in reverse order and
Table of contents
Other NINGBO LONGMA VEHICLE INDUSTRY Car Seat manuals
Popular Car Seat manuals by other brands

Baninni
Baninni Arona Isofix BN2001 instruction manual

Graco
Graco NAUTILUS 80 ELITE instruction manual

Crolla
Crolla ALPHA instruction manual

TigerTough Group
TigerTough Group 62307 installation guide

SCUDERIA FERRARI
SCUDERIA FERRARI F4000C manual

Kinderkraft
Kinderkraft CAR SEAT ADAPTER EVOLUTION COCOON user manual