NNNN Comium 30 Active User manual

User Manual
Comium 30
Active

2
Quick Start
Basics
Included in the box:
• Comium 30
• Power Cable
What you need in addition
to attach Comium to a wall:
• Wall mount VESA 400200
• 4 M6 Machine Screws
(Often included with VESA mount)
Unbox
30°
22.5°
The recommended listening
position is represented by the blue
line in the figure to the left.
Recommended
listening position

3
Room Boundaries
Be mindful of the side walls,
ceiling and floor when placing your
Comiums. It is recommended to
have some distance to boundary
surfaces to reduce unwanted
reflections.
The feasible distance to the side
wall is dependent on the room and
listening position, but it is worth
being mindful of.
Aim for symmetry! Try to create a
symmetric set-up, this will create
better stereo imaging.
X
X
592mm 120mm 400mm
592mm
200mm
VESA 400  200
(Not included)
Quick Start
Placement

4
Plug an XLR or TRS Jack cable
into Input 1 or Input 2.
Turn all knobs to 12 O’Clock.
Plug in the IEC C13 plug in the
Comium, and the other in your wall
outlet.
Flip the on switch on your Comium,
and enjoy!
Plug in a signal
Plug in the power
200mm
400mm
Attach your wall-mount
to the back of the
speaker cabinet
When a suitable position on the
wall is found, attach your wall
mount to the back of the speaker
cabinet.
Use 4 M6 screws. The maximum
thread insert depth is 11mm.
Quick Start
Connect

5
Panel & Connections
NB
The input gain knob has two distinct
sides. Before and after 12 O’clock.
Before 12 O’clock the Input expects
a line level signal. After 12 O’clock
the expected input is Mic level.
Input 1 Gain
Line level/Mic level selection & gain adjustestment
Power
Power Input IEC C13 cable
& Power Switch On/Off
Input 1
XLR/Jack Combo Balanced Input
Master Volume
Master Output
The two inputs summed
Input 2 Gain
Line level/Mic level selection
& gain adjustestment
Input 2
XLR/Jack Combo Balanced Input
Status LED
Signal Present Input signal Clipping

6
Specifications
Frequency response (± 3 db)
Max cont. SPL (1m, 2Pi)
Nominal dispersion
Weight
Nominal impedance
Mains power
Power Handling capacity
Connections:
Input
Output
Power
Components
30 - 22000 Hz
104 dB
90° x 90°
13,8kg
HF 8 1 
LF 8 
50/60 Hz 100-240 V
235 W
2  Combo (XLR + Jack)
1  XLR
1  IEC C14
1  1”
1  8”

7
Congratulations with your
NNNN Speaker. Enjoy.
NNNN AS
Syretårnet 43
3048
Drammen