Noble House Home Furnishings BARCRAFT CHO796 User manual

Please look in the Tray for hardware packs
CAUTION: This BarCart is NOT a TOY. Keep your child / children at bay in the
process of assembly.
For turning/ flipping the Barcart and to prevent damage to the Barcart, 02 persons
may be needed to execute this action.

Top Panel ( with
wood support bar)
Wheel Bolt
(M8 x 70mm)
Washer
(M8.5/30 x 5mm)
Washer
(M8/18x2mm)

Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
1

10
5
67
8
9
I
11
)Washer

10
5
67
8
9
I
11

Secure Handle (N) and Top Panel (I) by using Screw (4) and Screwdiver(12).
As show in picture above.
Do not fully tighten the Screw.

Push in the Tray (M) onto the assembly on step 9 as shown picture above.

With assistance from your adult partners, turn Barcart back to normal flat ground
EXERT pressure, floorwards, onto the Barcart.
Check for wobbles.
In a sequential manner, gradually tighten all Screws and Bolts until evenly secured.
Inspect the Barcart and make sure all parts are adequately connected.
In case of closing the Leaf (J1) (J2), please follow step 10
Your Barcart is ready for use.
This Barcart can only be used on flat, level surface.

Furniture may scratch floors. We recommend using furniture pads to
protect your floors.
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture under direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside . For indoor use only.
Not for commercial use. For residential use only.
Stains may be removed with mild soap solution and damp cloth.
Children should not climb or jump on the furniture.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.