Noble House Home Furnishings BARCART User manual

Please look in the dummy box for hardware packs
BARCART
Caution: You must read this before you process
Noble House Home Furnishings LLC Page 1 OF 8
CAUTION : This Barcart is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Barcart and to prevent damage to the Barcart, two adults are
needed to execute this action.
Assembly Instructions

Label Picture Description QTY
①
②
③
④
Bolts (M6x35mm)
Allen Screw (M6x60mm)
Allen Wrench
Spanner Wrench
5
5
1
1
A
B
C
D
E
2
1
2
2
2
Label
Picture Description QTY Label
Leg Frame
Upper Tray
Lower Tray
Handle
Blocked Wheel
Wheel
1
F
Noble House Home Furnishings LLC Page 2 OF 8

This has multiple parts and may require up to some 30 minutes to
Barcart
assemble. To give you an overview of the parts, the above picture is to
Barcart
help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
Before Beginning Assembly:
FRONT FACING
Wheel
Handle
Leg Frame
Lower Tray
Upper Tray
Blocked Wheel
Noble House Home Furnishings LLC Page 3 OF 8

Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
A
Place the Upper Tray (B) on a clean, non-marring surface as shown in picture above.
Position Leg Frame (A) into Upper Tray (B), secure by using Bolts(①) with Allen Wrench(③).
Do not fully tighten the Bolts.
B
Noble House Home Furnishings LLC Page 4 OF 8

Step 3
Step 4
Attach the other Leg Frame (A) into Handles (D) and Upper Tray (B)
as shown in the picture.
Secure Leg Frame (A) into Upper Tray (B) by using Bolts( ) with Allen Wrench( ).① ③
Do not fully tighten the Bolts
A
D
D
B
A
Noble House Home Furnishings LLC Page 5 OF 8
Insert Handle (D) into Leg Frame (A) as shown in the picture.
Repeat the same process with other Handle (D).

Step 5
With assistance from your adult partners, position the Lower Tray (C) onto the Leg
Frame (A) as shown in picture above.
Secure the Lower Tray (C) and Leg Frame (A) using Screws(②) with Allen Wrench (③).
Do not fully tighten theScrews.
Step 6
Insert Blocked Wheel (E) and Wheel (F) into Leg Frame (A) as shown in the picture.
Use Spanner Wrench (④
) to secure the wheels into the Leg Frame (A).
Repeat the same process with other wheels.
Note: On this step,it will have two Blocked Wheels and two Wheels.
Two Blocked Wheels should be in one side that parallel with Handle (D).
A
C
E
F
A
Noble House Home Furnishings LLC Page 6 OF 8

Step 7
With assistance from your adult partners, turn the Barcart back to normal
flat ground
EXERT pressure, floorwards, onto the Barcart.
This pressure will help the Legs and Barcart Top reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Screws, Bolts until evenly secured.
Inspect the Barcart and make sure all parts are adequately connected.
Your Barcart is ready for use.
This Barcart can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 7 OF 8

● Furniture may scratch floors. We recommend using furniture pads to protect your floors.
Care & Maintenance
Page 8 OF 8