Nobles Anser User manual

Nobles | 701 N. Lilac Drive | P.O. Box 1452 | Minneapolis MN 55440-1452 | 800.553.8033 | www.nobles.com | [email protected]
Specifications subject to change without notice. REV 8.14.06
Vacuum System
Airflow at orifice 80 cfm / 2.26 m3/h
Vacuum motor amps 7 A
Vacuum motor horsepower 1.12 hp
Vacuum motor stages 2 stage
Vacuum motor type Peripheral discharge, bypass; 4.8 in / 122 mm diameter; recognized by UL.
Vacuum motor voltage 120 V
Vacuum motor watts 840 watts
Waterlift at sealed orifice 71 in / 1803.4 mm
Recovery System
Recovery tank wet capacity 1.5 gal / 5.67 L
Vacuum hose length 8 ft / 2.43 m
Pump System
Solution pump amps 1.25 A
Solution pump pressure 30 psi / 207 kPa
Solution pump voltage 120 V
Solution pump watts 150 watts
Solution Delivery System
Solution capacity 2 gal / 7.57 L
Solution flow rate 0.25 gpm / 0.95 L / min
Solution hose description Clear braided hose
Solution hose length 8 ft / 2.43 m
Solution pump watts 150 watts
Spray jets count 1 jet
Power System
Power cord length 25 ft / 7.62 m
Power cord type SJTO; recognized by UL and CSA; non-marking safety yellow w/grounded plug.
Power consumption amps 8.25 A
Power consumption voltage 120 V
Power consumption watts 990 watts
Dimensions / Weight / Accessories
Length 21 in / 553.4 mm
Width 7.75 in / 196.8 mm
Height 17.5 in / 444.5 mm
Net weight 18 lb / 8.2 kg
Accessories 4 in / 100 mm clear hand tool and 8 ft / 2.4 m vacuum and solution hoses
Warranty 3 years / 2500 hrs on parts and labor (excluding batteries).
10 years on rotationally-molded polyethylene tanks.
Anser™
specifications