Nokia 5210 - Cell Phone - GSM Installation instructions

SUPPORT GUIDE FOR
Copyright © Nokia Mobile Phones 2002. All rights reserved | Issue 4
DIAL-UP
for the Nokia 5210

Contents
1. INTRODUCTION..............................................................................................................1
2. SYSTEM REQUIREMENTS.............................................................................................1
3. MAKING A DIAL-UP CONNECTION................................................................................ 1
Legal Notice
Copyright © Nokia Mobile Phones 2002. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the
prior written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are registered trademarks of the Nokia Corporation. Other product and
company names mentioned herein may be trademarks or tradenames of their respective owners.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements
to any of the products described in this document without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental,
consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any
kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness
for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior notice.

1. INTRODUCTION
First you must have the Nokia 5210 modem drivers installed on your computer. Easiest way
to do this is to install PC Suite first. Please note that you can't use your Nokia 5210 with PC
Suite and as a modem simultaneously.
2. SYSTEM REQUIREMENTS
To run the Nokia 5210 as a modem, you need:
• An Intel-compatible PC equipped with Windows 95/98/ME, Windows 2000
• It is also assumed that the PC Suite for the Nokia 5210 is installed
For connection between the Nokia 5210 and a PC you need a compatible infrared port in
computer
Note: In this guide, all references to personal computers (PC) are also applicable
to laptop computers.
3. MAKING A DIAL-UP CONNECTION
3.1 MAKING A NORMAL GSM DATA DIAL-UP CONNECTION
1. Go to My Computer – Dial-Up Networking - Make a new connection (in Win95/98).In Win
2000 Pro go to My Computer – Control Panel –Network and Dial-Up Connections – Make
New Connection. This opens a window where you can choose the right modem and name
the connection in Win95/98 (Picture 1.) and in Win 2000 Pro you see welcoming window
(Picture 2.).
Picture 1. Naming the connection Picture 2. Click Next>
1/4

For Win 95/98 follow pictures 3-6 and for Win 2000 Pro follow pictures 7-11.
Picture 3. Picture 4. Click Next>
Picture 5. Changing connection
properties (click right mouse
button and choose Properties).
Picture 6. Please uncheck the "Use area…"
if you don't need to use area or country code.
2/4

Following pictures shows steps to make a new dial-up connection in Win 2000 Pro (Pictures
7-11).
Note: You may get different windows and you may not need to go through as
many steps as shown but just skip those steps that you don't get. Following
pictures show the shortest way.
Picture 7. Choose either Dial up to private Picture 8. Select "Nokia 5210" and
network or Dial-Up to the Internet and click Next. click Next. NOTE! Modem list may
look different depending on which
option you chose in step 7.
Picture 9. Enter your ISP's phone number Picture 10. Select "For all users" or
and click Next. "Only for myself". NOTE! depending
on which option you chose in step 7
you may need to go through more
steps like setting up mail account
etc.
3/4

Picture 11. Name your connection and click Finish.
Note: If you want to use a 14.4-Kb/s data line must add the following line to the extra
settings option: +CBST=14. This can be done in a following way: Right click on the
connection icon and select Properties and then click on Configure… ÆConnection Æ
Advanced… ÆExtra settings).
4/4