Nokia G-240W-C User manual

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
1
POWER
About your Nokia G-240W-C
Easily connect your smartphones,
tablets, PCs and telephone to your
Nokia G-240W-C
4
1
2
4
6
8
7
4 Fiber connector
1
Telephone 1 and 2 voice ports
3
4 LAN Gigabit ports
2 Label with name and
password for the WiFi networks.
It includes access data for router
setup.
5 USBPort
9 Connection to power supply
8 (ON/OFF) Switch
7 Reset *
6 WPS button
What do the LEDs mean?
Interim (LTE) Access setup Fibre connection setup
1
2
3
4
1. Plug in the power supply and connect the power cable
to the router.
2. Plug one end of the fiber lead to the fiber port.
3. Switch on the power supply at the electrical circuit.
1 Insert the SIM card into the USB dongle (ensure SIM is
inserted correctly).
Note: Do not insert the SIM card into a handset as
the SIM is configured to only connect using the USB
dongle.
2 Insert the USB dongle into the USB port of the router.
3 Connect the power to the router.
4 Switch on the router pressing the power button at the
back of the router.
5 Allow 3 to 5 minutes for the configurations settings
to be downloaded to the router.
5
POWER
LAN
LAN
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
* To reset the router to the default
factory settings press and hold in
the reset button for 10 seconds.
4. Switch on the router by pressing the power button.
5. Wait 3 to 5 minutes for the router configurations to be
downloaded (the router may restart automatically after
the configurations has been downloaded).
3
9
POWER
(Green solid) Power on
(Red solid) Light failed on startup
(Off) Power off
LINK
(Green solid) GPON link between ONT and
OLT is operating normally
(Off) GPON link is down or no link connected
AUTH
(Off) ONT is not authorized
(Green Solid) ONT is authorized
(Green Flashing) ONT is in the process of ranging
or synchronizing over OMCI
WLAN
(Off) WLAN link is disabled
(Green Solid) WLAN link is enabled
(Green Flashing) Traffic is passing via WLAN link
TELEPHONE
(Green solid) Phone is off hook
(Green Flashing) In ‘call in’ or ‘talking’ condition
(Off) All phones are on hook
VOIP
(Green solid) VOIP service is up
(Off) VOIP service is down
INTERNET
(Green Solid) HSI WAN is connected
(Green Flashing) PPPoE connection in progress
(Off) HSI WAN is not connected
2
3
5
6
7
10
Power
Link
Auth
LAN
1 to 4
TEL
1 and 2
VoIP
WPS
2.4G
WPS
5G
WLAN
5G
WLAN
2.4G
USB
Internet
POWER
LINK
AUTH
LAN1
LAN2
LAN3
LAN4
TEL1
TEL2
VOIP
WPS 2.4G
WPS 5G
WLAN 5G
WLAN 2.4G
USB
INTERNET
6
rebiF
LAN
4
(Green Solid) Ethernet is linked
(Green Flashing) LAN activity is present
WPS (WiFi Protected Setup)
8
(Green Solid) WPS link is up
(Red Solid) WPS exception
(Green Flashing) WPS link activity
(Off) WPS link down or no link connected
USB
9
(Green Solid) USB device is connected
(Green Flashing) There is traffic activity
(Off) No USB device is connected

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
1
POWER
About your Nokia G-240W-C
Easily connect your smartphones,
tablets, PCs and telephone to your
Nokia G-240W-C
4
1
2
4
6
8
7
4 Fiber connector
1
Telephone 1 and 2 voice ports
3
4 LAN Gigabit ports
2 Label with name and
password for the WiFi networks.
It includes access data for router
setup.
5 USBPort
9 Connection to power supply
8 (ON/OFF) Switch
7 Reset *
6 WPS button
What do the LEDs mean?
Interim (LTE) Access setup Fibre connection setup
1
2
3
4
1. Plug in the power supply and connect the power cable
to the router.
2. Plug one end of the fiber lead to the fiber port.
3. Switch on the power supply at the electrical circuit.
1 Insert the SIM card into the USB dongle (ensure SIM is
inserted correctly).
Note: Do not insert the SIM card into a handset as
the SIM is configured to only connect using the USB
dongle.
2 Insert the USB dongle into the USB port of the router.
3 Connect the power to the router.
4 Switch on the router pressing the power button at the
back of the router.
5 Allow 3 to 5 minutes for the configurations settings
to be downloaded to the router.
5
POWER
LAN
LAN
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
* To reset the router to the default
factory settings press and hold in
the reset button for 10 seconds.
4. Switch on the router by pressing the power button.
5. Wait 3 to 5 minutes for the router configurations to be
downloaded (the router may restart automatically after
the configurations has been downloaded).
3
9
POWER
(Green solid) Power on
(Red solid) Light failed on startup
(Off) Power off
LINK
(Green solid) GPON link between ONT and
OLT is operating normally
(Off) GPON link is down or no link connected
AUTH
(Off) ONT is not authorized
(Green Solid) ONT is authorized
(Green Flashing) ONT is in the process of ranging
or synchronizing over OMCI
WLAN
(Off) WLAN link is disabled
(Green Solid) WLAN link is enabled
(Green Flashing) Traffic is passing via WLAN link
TELEPHONE
(Green solid) Phone is off hook
(Green Flashing) In ‘call in’ or ‘talking’ condition
(Off) All phones are on hook
VOIP
(Green solid) VOIP service is up
(Off) VOIP service is down
INTERNET
(Green Solid) HSI WAN is connected
(Green Flashing) PPPoE connection in progress
(Off) HSI WAN is not connected
2
3
5
6
7
10
Power
Link
Auth
LAN
1 to 4
TEL
1 and 2
VoIP
WPS
2.4G
WPS
5G
WLAN
5G
WLAN
2.4G
USB
Internet
POWER
LINK
AUTH
LAN1
LAN2
LAN3
LAN4
TEL1
TEL2
VOIP
WPS 2.4G
WPS 5G
WLAN 5G
WLAN 2.4G
USB
INTERNET
6
rebiF
LAN
4
(Green Solid) Ethernet is linked
(Green Flashing) LAN activity is present
WPS (WiFi Protected Setup)
8
(Green Solid) WPS link is up
(Red Solid) WPS exception
(Green Flashing) WPS link activity
(Off) WPS link down or no link connected
USB
9
(Green Solid) USB device is connected
(Green Flashing) There is traffic activity
(Off) No USB device is connected

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
1
POWER
About your Nokia G-240W-C
Easily connect your smartphones,
tablets, PCs and telephone to your
Nokia G-240W-C
4
1
2
4
6
8
7
4 Fiber connector
1
Telephone 1 and 2 voice ports
3
4 LAN Gigabit ports
2 Label with name and
password for the WiFi networks.
It includes access data for router
setup.
5 USBPort
9 Connection to power supply
8 (ON/OFF) Switch
7 Reset *
6 WPS button
What do the LEDs mean?
Interim (LTE) Access setup Fibre connection setup
1
2
3
4
1. Plug in the power supply and connect the power cable
to the router.
2. Plug one end of the fiber lead to the fiber port.
3. Switch on the power supply at the electrical circuit.
1 Insert the SIM card into the USB dongle (ensure SIM is
inserted correctly).
Note: Do not insert the SIM card into a handset as
the SIM is configured to only connect using the USB
dongle.
2 Insert the USB dongle into the USB port of the router.
3 Connect the power to the router.
4 Switch on the router pressing the power button at the
back of the router.
5 Allow 3 to 5 minutes for the configurations settings
to be downloaded to the router.
5
POWER
LAN
LAN
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
* To reset the router to the default
factory settings press and hold in
the reset button for 10 seconds.
4. Switch on the router by pressing the power button.
5. Wait 3 to 5 minutes for the router configurations to be
downloaded (the router may restart automatically after
the configurations has been downloaded).
3
9
POWER
(Green solid) Power on
(Red solid) Light failed on startup
(Off) Power off
LINK
(Green solid) GPON link between ONT and
OLT is operating normally
(Off) GPON link is down or no link connected
AUTH
(Off) ONT is not authorized
(Green Solid) ONT is authorized
(Green Flashing) ONT is in the process of ranging
or synchronizing over OMCI
WLAN
(Off) WLAN link is disabled
(Green Solid) WLAN link is enabled
(Green Flashing) Traffic is passing via WLAN link
TELEPHONE
(Green solid) Phone is off hook
(Green Flashing) In ‘call in’ or ‘talking’ condition
(Off) All phones are on hook
VOIP
(Green solid) VOIP service is up
(Off) VOIP service is down
INTERNET
(Green Solid) HSI WAN is connected
(Green Flashing) PPPoE connection in progress
(Off) HSI WAN is not connected
2
3
5
6
7
10
Power
Link
Auth
LAN
1 to 4
TEL
1 and 2
VoIP
WPS
2.4G
WPS
5G
WLAN
5G
WLAN
2.4G
USB
Internet
POWER
LINK
AUTH
LAN1
LAN2
LAN3
LAN4
TEL1
TEL2
VOIP
WPS 2.4G
WPS 5G
WLAN 5G
WLAN 2.4G
USB
INTERNET
6
rebiF
LAN
4
(Green Solid) Ethernet is linked
(Green Flashing) LAN activity is present
WPS (WiFi Protected Setup)
8
(Green Solid) WPS link is up
(Red Solid) WPS exception
(Green Flashing) WPS link activity
(Off) WPS link down or no link connected
USB
9
(Green Solid) USB device is connected
(Green Flashing) There is traffic activity
(Off) No USB device is connected

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
1
POWER
About your Nokia G-240W-C
Easily connect your smartphones,
tablets, PCs and telephone to your
Nokia G-240W-C
4
1
2
4
6
8
7
4 Fiber connector
1
Telephone 1 and 2 voice ports
3
4 LAN Gigabit ports
2 Label with name and
password for the WiFi networks.
It includes access data for router
setup.
5 USBPort
9 Connection to power supply
8 (ON/OFF) Switch
7 Reset *
6 WPS button
What do the LEDs mean?
Interim (LTE) Access setup Fibre connection setup
1
2
3
4
1. Plug in the power supply and connect the power cable
to the router.
2. Plug one end of the fiber lead to the fiber port.
3. Switch on the power supply at the electrical circuit.
1 Insert the SIM card into the USB dongle (ensure SIM is
inserted correctly).
Note: Do not insert the SIM card into a handset as
the SIM is configured to only connect using the USB
dongle.
2 Insert the USB dongle into the USB port of the router.
3 Connect the power to the router.
4 Switch on the router pressing the power button at the
back of the router.
5 Allow 3 to 5 minutes for the configurations settings
to be downloaded to the router.
5
POWER
LAN
LAN
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
ON/OFFPOWER
USB2USB1LAN4LAN3LAN2LAN1
TEL1 TEL2
WLAN
RESET
WPS2.4G
WPS5G
* To reset the router to the default
factory settings press and hold in
the reset button for 10 seconds.
4. Switch on the router by pressing the power button.
5. Wait 3 to 5 minutes for the router configurations to be
downloaded (the router may restart automatically after
the configurations has been downloaded).
3
9
POWER
(Green solid) Power on
(Red solid) Light failed on startup
(Off) Power off
LINK
(Green solid) GPON link between ONT and
OLT is operating normally
(Off) GPON link is down or no link connected
AUTH
(Off) ONT is not authorized
(Green Solid) ONT is authorized
(Green Flashing) ONT is in the process of ranging
or synchronizing over OMCI
WLAN
(Off) WLAN link is disabled
(Green Solid) WLAN link is enabled
(Green Flashing) Traffic is passing via WLAN link
TELEPHONE
(Green solid) Phone is off hook
(Green Flashing) In ‘call in’ or ‘talking’ condition
(Off) All phones are on hook
VOIP
(Green solid) VOIP service is up
(Off) VOIP service is down
INTERNET
(Green Solid) HSI WAN is connected
(Green Flashing) PPPoE connection in progress
(Off) HSI WAN is not connected
2
3
5
6
7
10
Power
Link
Auth
LAN
1 to 4
TEL
1 and 2
VoIP
WPS
2.4G
WPS
5G
WLAN
5G
WLAN
2.4G
USB
Internet
POWER
LINK
AUTH
LAN1
LAN2
LAN3
LAN4
TEL1
TEL2
VOIP
WPS 2.4G
WPS 5G
WLAN 5G
WLAN 2.4G
USB
INTERNET
6
rebiF
LAN
4
(Green Solid) Ethernet is linked
(Green Flashing) LAN activity is present
WPS (WiFi Protected Setup)
8
(Green Solid) WPS link is up
(Red Solid) WPS exception
(Green Flashing) WPS link activity
(Off) WPS link down or no link connected
USB
9
(Green Solid) USB device is connected
(Green Flashing) There is traffic activity
(Off) No USB device is connected

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5

ON/OFF
POWER
WLAN
RESETWPS5G
WPS2.4G
USB2
USB1
LAN1 LAN2 LAN3 LAN4
TEL1 TEL2
LAN
1 ZA-14
Connect your devices to the Nokia G-240W-C
A
B
Connect your devices via WiFi
(Example: smartphone, tablet):
Connect your mobile devices to the Nokia G-240W-C
wireless network. You will find the network name
(SSID) and password on the product label or on
the backpanel of the Nokia G-240W-C. If your WIFI
device is 5GHz compatible, you can connect to the
ALHN-XXXX-5 network if you prefer.
ABConnect your devices via cable
(Example: PC):
Connect your computer to the Nokia G-240W-C
yellow port
All access data at a glance
1
2
3
1
2
3 WiFi Network Password:
Change the router settings
To easily set up your Nokia G-240W-C with the devices
connected through the Internet browser:
1. Make sure your device is connected to the
Nokia G-240W-C (either through cable or WiFi).
2. Open the browser and enter https://192.168.1.254 in the
URL bar.
3. Enter the username and password specified
on the sticker at the bottom of your Nokia G-240W-C.
Frequently Asked
Questions
What should I do if I cannot browse the Internet and/or
use the telephone?
If you’ve previously been able to browse the Internet or
make phone calls, check if the router cables are connected
and restart the router by switching the power button off
and on again.
Can I turn the router off when I'm not using it?
If you're using VoiP the router must always be on and
connected to the telephone port in order to make and
receive calls.
Do I have to use the materials provided in the box?
We recommend that you use the parts included in the box.
All the parts have passed thorough quality control checks
and are intended to be used exclusively with this router.
Where should I place the router?
In order to avoid loss of service quality, we recommend
placing the router somewhere well vented and far away
from heat sources. If you consider it necessary to improve
the WiFi signal, we recommend that you place it vertically,
away from any obstacles and in a high position. Changing
the direction it faces may also help, provided that it’s
always placed vertically.
Where can I find more help?
• Visit our technical questions solution assistant at
https://help.vodacom.co.za/personal/topics/61/
Vodacom-Fibre-
• Call Vodacom Fibre Customer Care on 082 1904.
Quick Setup
Guide
Nokia G-240W-C
© 2018 Vodafone Group. Vodafone and the Vodafone logos
are trademarks of Vodafone Group Plc or its associated
companies. Other products and company names may be
registered trademarks of their relevant owners.
Username/Password:
WiFi Network Name:
Enter this username/password to access the Setup Web.
This is what your Nokia G-240W-C WiFi is called.
Enter this password when connecting to your
Nokia G-240W-C WiFi network.
192.168.1.254
userAdmin
xxxxxxxx
xxxxxxxx
ALHN-XXXX
ALHN-XXXX-5