NOOK SOLO Instructions for use

Construction Guide
SOLO
PAGE 1 OF 11

Nook Parts and Tools
Required
SHELL
Roof
Side (Long)
Side (Short)
Base
Castors (4of)
DOOR [OPTIONAL]
Door (with Handle)
Door Hinge Panel
REAR WALL [OPTIONAL]
Rear Wall Upper
Rear Wall Lower (with shelf)
INTERIOR
Acoustic Wall Panel
Acoustic Roof Panel (with vents)
Seat Bracket (2of)
Table Leg Assembly (with Fans)
Table Leg Cupboard (with Power)
Table Top
Seat
Seat Cushion
Seat Cushion Wall
GENERAL
Hardware Kit
Nook Parts Tools Required
A minimum of 2 people
required for construction
Allen Key 4mm + 5mm
Phillips Screwdriver
Socket Wrench & 13mm Hex Socket
PAGE 2 OF 11

Step One
Exploded View
Assemble frame and castors
PAGE 3 OF 11

Step One
Zip Bolt
Installation
video
3x 16x
4x10x
Assemble frame and castors
3x
4x
10x
PAGE 4 OF 11

Step Two
1x 1x
4x
Install desk
4x
4x
4x
Route cables under desk
surface.
PAGE 5 OF 11

Step Three
Install upper panel, and
then slide in side panel
as shown.
4x
Install acoustic panels
4x
PAGE 6 OF 11

Step Four
2x 6x
8x 6x
Install seat
2x
6x
PAGE 7 OF 11

Step Five
8x
Install back panels
8x
Reverse for left hand assembly
Right hand
assembly shown
Install shelf on
inside of lower panel
before assembly.
3x
PAGE 8 OF 11

Step Six-A
6x
Install fixed front panel
(if door option not chosen)
6x
PAGE 9 OF 11

Step Six-B
Install Door
(if door option chosen)
6x
6x
PAGE 10 OF 11