Scott Living 2026FC-24-201 User manual

( 24-IN W x 16-IN D x 72-IN H)
24-in Floor Cabinet
Date Purchased _______________________
TM
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service department at
1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday.
www.greentouchhome.com
Roveland Bathroom Floor Cabinet

2026FC-24-200 24" Dark Gray Finish Floor Cabinet
24" White Finish Floor Cabinet2026FC-24-201
24" Mahogany Finish Floor Cabinet2026FC-24-202
2026FC-24-205 24" Black Oak Finish Floor Cabinet
MODEL NUMBER DESCRIPTION
2026FC-24-242 24" Light Gray Finish Floor Cabinet
TM
2

PACKAGE CONTENTS
HARDWARE CONTENTS
Shelf Pin
Qty. 16
BBAA
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
this product.
WARNING
CAUTION
• Some steps are more easily handled with two adults.
B
A
F
F
F
F
D
C
E
G
PART DESCRIPTION QUANTITY
A Cabinet 1
BWall Mounting Spacer Bar
(preassembled to Cabinet (A)) 1
CUpper Door
(preassembled to Cabinet (A)) 1
G Wood Door Panel 1
DDrawer
(preassembled to Cabinet (A)) 1
ELower Door
(preassembled to Cabinet (A)) 1
F Shelf 4
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
3
• Before installation, carefully use scissors or utility knife to cut and unwrap all parts. Make sure
you DO NOT discard the hardware.
• Use care when installing your new wall cabinet; take your time and follow the installation
instructions closely.
Touch-up Pen
Qty. 1

PREPARATION
Estimated Assembly Time: 20 minutes (24 hours for adhesive to dry).
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
INSTALLATION INSTRUCTIONS
2
1
1
A
B
2
4
Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors,
adhesive, power drill with drill bit and measuring tape.
1. If there is baseboard at the location where you
want to install floor cabinet then directly go to
step 2. If there isn't a baseboard at the location,
please remove the wall mounting spacer bar (B)
from back of cabinet by unscrewing the screws
on the back of the wall mounting spacer bar then
go to step 2.
2. Clean area where the cabinet (A) will be
permanently located prior to beginning
installation, ensuring the cabinet (A) will not
interfere with any plumbing or electrical lines
once mounted.
Locate wall studs and mark locations. With the
help of another adult, place completed cabinet
assembly to its final location. Adjust the height
of the cabinet (A) by twisting the adjustable
leveler foot pins on the bottom of each leg. Twist
clockwise to decrease height or twist counter-
clockwise to increase cabinet height.
Using hardware appropriate for your wall type
such as cabinet screw or toggle bolt (not
included), secure cabinet (A) to preferably two
wall studs anywhere through the cabinet
mounting bar. Be careful not to disturb any
electrical or water lines that may be concealed
in the wall.

Hardware Used
Shelf Pin x 16
BB
3
4
F
F
F
F
2
2
2
2
2
2
2
2
2
2
1
BB
1
c
3
c
b
1
1
a
1
3
a
5
INSTALLATION INSTRUCTIONS
3. Insert shelf pins (BB) at desired height, ensuring
they are level. Place shelves (F) on top of shelf
pins (BB).
4. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in or out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.

5
D
6
D
A
6
INSTALLATION INSTRUCTIONS
5. To remove drawer (D) preassembled in
cabinet (A), fully extend drawer. Locate
plastic levers under drawer box on metal
glide tracks at left and right sides of drawer
box. To
disengage drawer box from glides,
push on plastic levers. Then, gently lift drawer
up to remove it from
cabinet (A).
6. Locate drawer (D) and set aside. Fully
extend lower drawer glide tracks. With the help
of another adult, hold the extended glide in one
hand and the drawer in the other. Gently
place the back of the drawer box into the
metal hook located on the back of the drawer
track. Once the glide hook has been slid into
the hole in the back of the drawer box, gently
lower the drawer box down onto the extended
glide tracks. At the same time depress both of
the glide handles and allow the drawer box to
fully rest on the glide tracks. Test to see if the
drawer box is fully engaged. If the drawer box
can still be lifted off the glide track then start
again from the beginning. Never force
anything or else damage to the drawer or
glide hardware could result. The drawer location
can be adjusted slightly up or down by twisting
the adjuster knob next to the glide handles.

WARRANTY
CARE AND MAINTENANCE
CHANGE DOOR PANELS (OPTIONAL)
2. Remove the glass panel from the door frame, then insert the included wood door panel (G).
123
1
3
2
4H
G
2
3
1
4
The manufacturer warrants this item against defects in materials and workmanship for a period
of one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer.The
manufacturer is not accountable whatsoever for product installation during the warranty period.
There is no further expressed warranty. The manufacturer shall not be legally responsible for
incidental, consequential or special damages arising at or in connection with product use or
performance except as may otherwise be accorded by law. The manufacturer disclaims any and
all implied warranties.
7
• Dust the Wall cabinet regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the Wall cabinet with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
Note: The pre-installed glass door panels can be switched out with the included wood door
panels (G).
1. Remove the silicone trim along the outer edges of the glass panel on the inside of the door.
Startat a corner and pull to remove the four pieces. Be careful not to damage the silicone trim
as it will be used to secure the new panel.
3. Using your finger press the silicone trim back into place. Move around the outer edge of the
panels until all four sides are secure.

REPLACEMENT PARTS LIST FOR 2026FC-24-200
8
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
Shelf
D
Wood Door Panel
E
F
G
DESCRIPTION
B
Drawer Front
2026FC-24-200-001
C 2026FC-24-200-002
2026FC-24-200-003
2026FC-24-200-004
2026FC-24-200-005
2026FC-24-200-
006/007
Lower Door
Wall Mounting Spacer Bar
Upper Door
HGlass Door Panel
Leveler
GG
CF-D25-005-BN
CF-96-004-BN
Hinge C-90-107
AA
Knob (with screw)
Glide Track Set
BB
CC
Pull (with screw)
DD
EE
FF
Touch-up pen OX-0180Z
Shelf pin B1044
PUDTC-12x3-Handle
T-1007
PART PART#
C
B
F
D
H
G
E
AA BB CC DD FF GGEE

REPLACEMENT PARTS LIST FOR 2026FC-24-201
9
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
Shelf
D
Wood Door Panel
E
F
G
DESCRIPTION
B
Drawer Front
2026FC-24-201-001
C 2026FC-24-201-002
2026FC-24-201-003
2026FC-24-201-004
2026FC-24-201-005
2026FC-24-201-
006/007
Lower Door
Wall Mounting Spacer Bar
Upper Door
HGlass Door Panel
Leveler
GG
CF-D25-005-BN
CF-96-004-BN
Hinge C-90-107
AA
Knob (with screw)
Glide Track Set
BB
CC
Pull (with screw)
DD
EE
FF
Touch-up pen OF-0010
Shelf pin B1044
PUDTC-12x3-Handle
T-1007
PART PART#
C
B
F
D
H
G
E
AA BB CC DD FF GGEE

REPLACEMENT PARTS LIST FOR 2026FC-24-202
10
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
Shelf
D
Wood Door Panel
E
F
G
DESCRIPTION
B
Drawer Front
2026FC-24-202-001
C 2026FC-24-202-002
2026FC-24-202-003
2026FC-24-202-004
2026FC-24-202-005
2026FC-24-202-
006/007
Lower Door
Wall Mounting Spacer Bar
Upper Door
HGlass Door Panel
Leveler
GG
CF-D25-005-BN
CF-96-004-BN
Hinge C-90-107
AA
Knob (with screw)
Glide Track Set
BB
CC
Pull (with screw)
DD
EE
FF
Touch-up pen W3350A
Shelf pin B1044
PUDTC-12x3-Handle
T-1007
PART PART#
C
B
F
D
H
G
E
AA BB CC DD FF GGEE

REPLACEMENT PARTS LIST FOR 2026FC-24-205
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
11
Shelf
D
Wood Door Panel
E
F
G
DESCRIPTION
B
Drawer Front
2026FC-24-205-001
C 2026FC-24-205-002
2026FC-24-205-003
2026FC-24-205-004
2026FC-24-205-005
2026FC-24-205-
006/007
Lower Door
Wall Mounting Spacer Bar
Upper Door
HGlass Door Panel
Leveler
GG
CF-D25-005-BN
CF-96-004-BN
Hinge C-90-107
AA
Knob (with screw)
Glide Track Set
BB
CC
Pull (with screw)
DD
EE
FF
Touch-up pen W3504A
Shelf pin B1044
PUDTC-12x3-Handle
T-1007
PART PART#
C
B
F
D
H
G
E
AA BB CC DD FF GGEE

REPLACEMENT PARTS LIST FOR 2026FC-24-242
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
12
Shelf
D
Wood Door Panel
E
F
G
DESCRIPTION
B
Drawer Front
2026FC-24-242-001
C 2026FC-24-242-002
2026FC-24-242-003
2026FC-24-242-004
2026FC-24-242-005
2026FC-24-242-
006/007
Lower Door
Wall Mounting Spacer Bar
Upper Door
HGlass Door Panel
Leveler
GG
CF-D25-005-BN
CF-96-004-BN
Hinge C-90-107
AA
Knob (with screw)
Glide Track Set
BB
CC
Pull (with screw)
DD
EE
FF
Touch-up pen OF-0120R
Shelf pin B1044
PUDTC-12x3-Handle
T-1007
PART PART#
C
B
F
D
H
G
E
AA BB CC DD FF GGEE