Home Decorators Collection WINCHESTER FTM70567 User manual

page 1-8
WINCHESTER COFFEE TABLE
Please read over this instruction manual as it will save time in the assembly of
this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft flat
surface to avoid any damages to the product’s finish.
HDC#: MFG#:FTM70567

page 2-8
Caution:
The Winchester coffee table was made for the explicit purpose of providing
outdoor functions and is not to be used as a toy. This product is not intended
for inclement /severe weather in any form including, but not limited to: rain,
hail, sleet, snow and/or wind. Manufacturer recommends that with formidable
weather approaching you store and/or cover this coffee table. Do not locate
structure near any open flame. Do not use structure as a support. Do not
shake, lean or climb on structure. Children under age of 10, near the structure,
should be supervised by a competent adult at all times. This product is NOT
intended for commercial use and will void the warranty.
WARRANTY
Yotrio Corporation, City of Industry, CA. 91748, extends two years frame
limited warranty to the original purchaser as a sign of our dedication to the
highest possible quality standards. The warranty is designed to cover the
coffee table under normal residential use. This Warranty is non-transferable
and void if the furniture is used in non-residential environment and/or has
been abused. The warranty also becomes void in the event the coffee table
has been damaged by acts of God, calamity or misuse. This warranty does not
cover in the event of inclement weather such as rain, hail, sleet, snow or wind.
We reserve the right to make substitutions with similar merchandise, if the
model in questions is no longer in production. The manufacturer recommends
that with ANY formidable weather approaching you disassemble and store
your coffee table in a safe location.
CARE AND MAINTENANCE:
For best results, clean the coffee table with damp cloth and dry thoroughly.
This will help prevent mildew by removing dirt particles that may accumulate.
Do not use abrasive materials or cleaners. In order to prolong the life of your
coffee table, when not in use or in inclement weather (rain, hail, sleet, snow,
wind), fire, extreme heat and freezing conditions, the dining table needs to be
stored in a dry, sheltered place.

page 3-8
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.homedecorators.com
OR TOLL FREE AT:
1-800-245-2217
MO N D AY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30 AM TO
8:00PM EASTERN STANDARD TIME
Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding item
numbers as well as the name of the store where you purchased the item.
4. Please gather all of this information BEFORE you call customer service.

page 4-8
Parts Check List
Please remove all parts carefully from box and lay out on clean, soft
surface to protect product’s finish.
Table Top – 1PC
Table Leg – 2 PCS
Leg Connector– 1 PC
①
②
③

page 5-8
A. M6X15 Bolt – 10+1 PCS B. M6 Washer – 10+1 PCS
C. Hex Wrench – 1 PC

page 6-8
1. Lay the table top (1) upside down on a soft surface. Attach
the table legs (2) to the table top (1) using M6x15 bolts (A)
and M6 washers (B). Use the hex wrench (C) to loosely
tighten all the bolts. Repeat this step for the other table
legs.
Do not fully tighten all the bolts!

page 7-8
2. Attach the leg connector (3) to the table legs (2) using M6x15
bolts (A) and M6 washers (B). Use the hex wrench (C) to
loosely tighten all the bolts.
Do not fully tighten all the bolts!

page 8-8
3. Once all the bolts are in place. Fully tighten all the bolts with
the hex wrench (C). Turn the table right side up. Check to
ensure the table is tightly assembled and stable before use.