NookBox Z-Wave Dongle User manual

1NookBox Installation Guide Z-Wave Dongle
NookBox Z-Wave Dongle
(P119022 / E6309672)
Installation Guide

2NookBox Installation Guide Z-Wave Dongle
NookBox Z-Wave Dongle designed to be used with NookBox gateway to provide extra
Z-wave device compatibility. It enables the Control Panel to learn in and interact with various
Z-wave devices on the market.
NookBox Z-Wave Dongle
(P119042 / E6309678)

3NookBox Installation Guide Z-Wave Dongle
Identifying the Parts
1. Blue LED
LED ON: Working Normally
Operation
1. Power down the NookBox Control Panel
2. Plug the Z-wave Dongle into the USB port on the Control Panel
3. Power on the Control Panel
4. If the Z-Wave Dongle is detected by control panel, the “Exclusion” and “Z-Wave Reset”
features will be displayed under Device Management in the website conguration page.
5. Select “Z-Wave Reset” and click “ Yes” to reset Z-wave dongle.
6. Refer to Control Panel installation manual and individual Z-wave device manual to learn in and con-
trol your Z-wave devices.
<NOTE>
Do NOT plugin / unplug the Z-wave dongle into Control Panel when the panel is powered on.

4NookBox Installation Guide Z-Wave Dongle
For more information visit:
www.getnookbox.com