NordicTrack A2550 Pro Treadmill User manual

Base Foot Spacer
(36)–2
3/8" Star
Washer (11)–6
#8 x 1/2"
Screw (1)–14 #8 x 1" Tek Screw
(2)–4
3/8" Nut (10)–4
1/4" Star
Washer (12)–2
5/16" Star
Washer (9)–8
5/16" x 3/4"
Patch Bolt (5)–4
5/16" x 1 1/2"
Patch Bolt (4)–6
3/8" x 5 1/2" Patch Bolt (7)–2
1/4" x 1/2"
Patch Bolt (8)–2
3/8" x 2 1/4" Latch Patch Bolt (6)–1
3/8" x 2" Bolt (3)–1
1/4" x 1 3/4"
Patch Bolt (91)–2
3/8" x 3" Bolt (67)–2
3/8" x 2 1/4" Patch Bolt (31)–2
3/8" x 3 3/4" Patch Bolt (97)–2
For detailed instructions, see the Userʼs Manual. Note: he underside of the walking belt is coated with high-
performance lubricant. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth
and a mild, non-abrasive cleaner.
NordicTr ck®A2550 Pro Tre dmill • Model No. 831.24967 • Revised 01/10/11
QUICK ASSEMBLY GUIDE

3. Route the Upright Wire (85) through the Right
Upright (83).
4. Attach the Right Upright (83). Repe t this step
on the other side.
2
1. Pull the Upright Wire (85) out of the indicated
hole. Attach the Base Feet (92).
2
92
92
2
2
2
92
92
85
36
36
Hole
2. Attach a Wheel (95).
67
95 10
96
96
Wire ie
85
83
83
11
7
11
31
97
5. Attach a Wheel (95), and then attach the Base
Cover (84).
84
1
167
95
10
96
96

6. Attach the Frame Crossbar (107).
9. Attach the console assembly.
8. Connect the Upright Wire (85) to the console
wire.
7. Route the console wire through the Right
Handrail (79). Attach the Right Handrail and the
Left Handrail (not shown).
3
107 91
91
79 4
8
12
9
Console
Wire
Console
Wire
Remove
Wire
ie
85
5
4
4
9
9
5
Console
Assembly

10. Attach the Left and Right Accessory rays (101,
104).
12. Attach the Storage Latch (51).
11. Attach the Upright Covers (87, 90; 86, 88).
Nordic rack is a registered trademark of ICON IP, Inc.
Part No. 311574 R0111A Printed in USA © 2011 ICON IP, Inc.
104
1
1
101
1
1
87
1
90
86 88
1
3
10
10
51
Large Barrel
6