Nortel 4070 User manual

Nortel Secure Network Access
Installation — Quick Start Switch
4070
NN47230-303 324392-A
.

Nortel Secure Network Access
Document status: Standard
Document version: 01.01
Document date: 28 July 2008
Copyright © 2008, Nortel Networks
All Rights Reserved.
Sourced in Canada, the United States of America, and India
LEGAL NOTICE
While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed
to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS "WITHOUT WARRANTY OR CONDITION OF ANY
KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject
to change without notice.
Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks.
All other trademarks are the property of their respective owners.

3
Contents
Regulatory Information and Safety Precautions 5
International Regulatory Statements of Conformity 5
National Electromagnetic Compliance (EMC) Statements of Compliance 5
FCC statement (USA only) 5
ICES statement (Canada only) 6
Canadian Department of Communications Radio Interference Regulations 6
Règlement sur le brouillage radioélectrique du ministère des Communications 6
CE marking statement (Europe only) 6
EN 55022 statement 6
EN 55024 statement 6
European Union and European Free Trade Association (EFTA) notice 6
VCCI statement (Japan/Nippon only) 7
MIC notice (Republic of Korea only) 7
National Safety Statements of Compliance 7
EN 60950 statement 7
NOM statement (Mexico only) 7
Información NOM (unicamente para México) 8
Denan statement (Japan/Nippon only) 8
National Environmental Statements of Compliance 9
Restriction on Hazardous Substances Directive Compliance Statement 9
WEEE Directive Compliance Statement 9
Notices 9
Cautions and Warnings 10
Software license 13
New in this release 17
Features 17
Other changes 17
Introduction 19
Prerequisites 19
Navigation 19
Installation preparation 21
Navigation 21
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

4Contents
Safety precautions 21
Safety precautions navigation 21
Installation checklist 23
Installation 25
Navigation 25
Unpacking the device 25
Installing an NSNA device into a rack 26
Prerequisites for installing an NSNA into a rack 26
Cabling the device 30
Cabling the device navigation 30
Connecting network cables 30
Connecting serial cables 30
Configuration 33
Navigation 33
Creating a new cluster 33
Prerequisites 33
Joining an SNAS to an existing cluster 36
Enabling the browser-based interface 38
Applying the Nortel SNAS license 40
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

5
Regulatory Information and Safety
Precautions
Read the information in this section to learn about regulatory conformities
and compliances.
International Regulatory Statements of Conformity
This is to certify that the Nortel Secure Network Access Switch equipment
was evaluated to the international regulatory standards for electromagnetic
compliance (EMC) and safety and were found to have met the requirements
for the following international standards:
•EMC – Electromagnetic Emissions – CISPR 22, Class A
•EMC – Electromagnetic Immunity – CISPR 24
•Electrical Safety – IEC 60950, with CB member national deviations
Further, the equipment has been certified as compliant with the national
standards as detailed below.
National Electromagnetic Compliance (EMC) Statements of
Compliance
FCC statement (USA only)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy. If it is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case users will be required to take
whatever measures may be necessary to correct the interference at their
own expense.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

6Regulatory Information and Safety Precautions
ICES statement (Canada only)
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (Nortel Secure Network Access Switch) does not
exceed the Class A limits for radio-noise emissions from digital apparatus as
set out in the Radio Interference Regulations of the Canadian Department
of Communications.
Règlement sur le brouillage radioélectrique du ministère des
Communications
Cet appareil numérique (le commutateur Nortel Secure Network Access
Switch) respecte les limites de bruits radioélectriques visant les appareils
numériques de classe A prescrites dans le Règlement sur le brouillage
radioélectrique du ministère des Communications du Canada.
CE marking statement (Europe only)
EN 55022 statement
This is to certify that the Nortel Secure Network Access Switch equipment
is shielded against the generation of radio interference in accordance with
the application of Council Directive 2004/108/EC. Conformity is declared by
the application of EN 55022 Class A (CISPR 22).
CAUTION
This device is a Class A product. In a domestic environment, this
device can cause radio interference, in which case the user may
be required to take appropriate measures.
EN 55024 statement
This is to certify that the Nortel Secure Network Access Switch is shielded
against the susceptibility to radio interference in accordance with the
application of Council Directive 2004/108/EC. Conformity is declared by the
application of EN 55024 (CISPR 24).
European Union and European Free Trade Association (EFTA) notice
All products labeled with the CE marking comply with R&TTE Directive (1995/5/EEC) which
includes the Electromagnetic Compliance (EMC) Directive (2004/108/EC) and the Low
Voltage Directive (2006/95/EC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms (ENs). The equivalent international standards are listed in
parenthesis.
•EN 55022 (CISPR 22)–Electromagnetic Interference
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

NOM statement (Mexico only) 7
•EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic
Immunity
•EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics
•EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker
VCCI statement (Japan/Nippon only)
This is a Class A product based on the standard of the Voluntary Control
Council for Interference (VCCI) for information technology equipment. If this
equipment is used in a domestic environment, radio disturbance may arise.
When such trouble occurs, the user may be required to take corrective
actions.
MIC notice (Republic of Korea only)
This device has been approved for use in Business applications only per
the Class A requirements of the Republic of Korea Ministry of Information
and Communications (MIC). This device may not be sold for use in a
non-business application.
Observe the Regulatory Marking label on the back or bottom of each switch
for specific certification information pertaining to this model. Each Nortel
Secure Network Access Switch model is approved for shipment to/usage in
Korea and is labeled as such, with all appropriate text and the appropriate
MIC reference number.
National Safety Statements of Compliance
EN 60950 statement
This is to certify that the Nortel Secure Network Access Switch eqipment
is in compliance with the requirements of EN 60950 in accordance with
the Low Voltage Directive. Additional national differences for all European
Union countries have been evaluated for compliance.
NOM statement (Mexico only)
The following information is provided on the devices described in this
document in compliance with the safety requirements of the Norma Oficial
Méxicana (NOM):
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

8Regulatory Information and Safety Precautions
Exporter: Nortel Networks,
4655 Great America Parkway,
Santa Clara, CA 95054 USA.
Importer: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez México D.F. 03900
Tel:
Fax: [phone]
52 5 480 2199
Input: Model SNAS 4070
AC Redundant Power Supply – 835W
Input: 100-127 VAC 10.0A, 200-240 VAC 5A 50-60 HZ
Información NOM (unicamente para México)
La información siguiente se proporciona en el dispositivo o en los
dispositivos descritos en este documento, en cumplimiento con los
requisitos de la Norma Oficial Méxicana (NOM):
Exportador: Nortel Networks,
4655 Great America Parkway,
Santa Clara, CA 95054 USA.
Importer: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez México D.F. 03900
Tel:
Fax: [phone]
52 5 480 2199
Embarcar a: Modele SNAS 4070
AC Redundant Power Supply – 835W
Input: 100-127 VAC 10.0A, 200-240 VAC 5A 50-60 HZ
Denan statement (Japan/Nippon only)
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

Notices 9
National Environmental Statements of Compliance
The WEEE Directive 2002/96/EC and RoHS (Restriction of Hazardous
Substances) Directive 2002/95/EC sets collection, recycling and recovery
targets for various categories of electrical products and their waste.
Restriction on Hazardous Substances Directive Compliance
Statement The Restriction on Hazardous Substances Directive (RoHS) (2002/95/EC),
which accompanies the WEEE Directive, bans the use of heavy metals and
brominated flame-retardants in the manufacture of electrical and electronic
equipment. Specifically, restricted materials under the RoHS Directive are
Lead (including solder used in PCB’s), Cadmium, Mercury, Hexavalent
Chromium, and Bromine.
Nortel declares compliance with the European Union (EU) RoHS Directive
(2002/95/EC).
WEEE Directive Compliance Statement
This product at end of life is subject to separate collection
and treatment in the EU Member States, Norway, and
Switzerland and therefore is marked with the symbol
shown at the left. Treatment applied at end of life of
these products in these countries shall comply with
the applicable national laws implementing Directive
2002/96/EC on Waste of Electrical and Electronic
Equipment (WEEE).
Nortel declares compliance with the European Union (EU)
WEEE Directive (2002/96/EC).
Notices Notice paragraphs alert you about issues that require your attention. The
following paragraphs describe the types of notices used in this guide.
CAUTION
ESD
ESD notices provide information about how to avoid discharge of
static electricity and subsequent damage to Nortel products.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.

10 Regulatory Information and Safety Precautions
CAUTION
Caution notices provide information about how to avoid possible
service disruption or damage to Nortel products.
WARNING
Warning notices provide information about how to avoid personal
injury when working with Nortel products.
DANGER
Danger — High Voltage notices provide information about how
to avoid a situation or condition that can cause serious personal
injury or death from high voltage or electric shock.
DANGER
Danger notices provide information about how to avoid a situation
or condition that can cause serious personal injury or death.
Cautions and Warnings
WARNING
Installation must be performed by qualified service personnel only.
Read and follow all warning notices and instructions marked on
the product or included in the documentation.
WARNING
This product relies on the building’s installation for overcurrent
protection. Ensure that a fuse or circuit breaker no larger than
120 VAC, 15A U.S. (240 VAC, 10 A international) is used on the
phase conductors.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Copyright © 2008, Nortel Networks
.