North Star M109172B User manual

TM
Owner’s Manual
Instructions for Assembly, Testing, Operation, and Servicing
Water Pump Wheel Kit: Outdoor agricultural product used to
move North Star water pumps by hand.
WARNING
READ and UNDERSTAND the Owner’s Manual completely before using this water pump wheel kit.
Assemble, test, and use only in accordance with the Owner’s Manual instructions.
Improper use of the water pump could result in serious injury or illness to the operator or nearby
persons/animals.
Any Questions, Comments, Problems, or Parts Orders
Call North Star Product Support 1-800-270-0810
ITEM NUMBER: 109172
SERIAL NUMBER: _______________
M109172B

Hazard Signal Word Definitions
2

Table of Contents
3
About Your Water Pump ............................................................................................................ 4
Important Safety Information......................................................................................................4
During Assembly
During Operation
Unpacking
Unpacking...........................................................................................................................................5
Unpacking the Manual Bag........................................................................................................................... 5
Assembly.................................................................................................................................................................. 6
Machine Components....................................................................................................................8
Operation - Using the Water Pump Wheel Kit.....................................................................................9
Specifications..................................................................................................................................9
Wheel Kit Exploded View...........................................................................................................10
Limited Warranty........................................................................................................................11

About Your Water Pump Wheel Kit
4
Thank you for purchasing your North Star Water Pump Wheel Kit!
About Your Water Pump Wheel Kit
This water pump wheel kit is designed for use with the North Star water pump. It is designed to
aid movement, by hand of the water pump unit.
The technical specifications for your water pump wheel kit are provided in the “Specifications”
section of this manual.
Follow all safety precautions presented throughout this manual. A summary of important safety
information can be found at the end of the manual.
Contact North Star Product Support at 1-800-270-0810 for any questions
about the appropriate use of this water pump wheel kit and/or optional
accessories.
Warranty Registration:
Please fill in the warranty registration information and have it on hand when you call in on a
warranty claim.
Important Safety Information
WARNING
Read and understand this owner’s manual completely before using the water pump wheel
kit.
Improper use of the water pump wheel kit could result in serious injury for the operator
or nearby persons/animals.
-------------------------------------- DURING ASSEMBLY -------------------------------
EXERCISE CAUTION when installing components. Follow the steps listed in the assembly section of this
manual to properly install the water pump wheel kit.
DO NOT MODIFY water pump design.
------------------------------------- DURING OPERATION ------------------------------
MAKE SURE the tires are fully inflated and in good repair before using the water pump wheel kit. When
adding air to the tires, do not over-inflate –serious injury could occur if tire explodes.
DO NOT RIDE or TRANSPORT cargo on the water pump wheel kit.
TURN OFF water pump before transporting.
INSPECT and PREPARE water pump wheel kit before each use as directed in this manual.

Unpacking
5
Closely inspect all contents in the shipping carton.
Note that some parts are shipped inside the manual bag.
If you have damaged components: Contact the freight company that delivered the unit and file a claim.
If you have missing components: Contact North Star Product Support at 1-800-270-0810.
The following items are found in the manual bag.
Handle & Grip
Qty 1
Tire
Qty 2
Axle Plate
Qty 2
Handle Mount
Qty 1
Axle Channel
Qty 2
5/16” Flange Nut
Qty 6
5/16” – 18 x ¾” Bolt
Qty 4
5/16” – 18 x 2” Bolt
Qty 3
5/8” Hex Nut
Qty 4
1/4” x 3/4” Self Drilling
Hex Screw
Qty 4
5/8” – 11 x 4” Bolt
Qty 2
5/16” Nyloc Nut
Qty 1
5/8” Lock Washer
Qty 2

Assembly
6
5/8” Lock Washer
5/8” x 4” Bolt
5/8” Hex Nut
5/16” Nut
5/8” Hex Nut
5/16” x ¾” Bolt
Axle Channel
Axle Plate
Parallel
Tighten
bolts &
nuts
Tighten
bolts &
nuts
1/4” x 3/4” Self
Drilling Hex Screw
Step 1: Attach wheels and axle brackets
Attach axle plates, axle channels and wheels to the right and left side of the frame, as shown in
the figure below, using (4) 5/16” x ¾” bolts, (4) 5/16” nuts, (2) 5/8” x 4” bolts, (2) 5/8” Lock
washers and (4) 5/8” Hex nuts. Hand tighten.
Step 2: Position wheels
Make sure the wheels and the rubber feet of the frame are sitting on a level surface. Wheels
should be parallel with the right and left sides of the frame. Once positioned, tighten the bolts
until the axle plate and axle channel contact each other (the axle plate will deform around the
tube slightly). Using a drill and a 3/8” socket bit, secure the axle bracket assembly to the roll
cage tube with (2) 1/4” x 3/4” self drilling hex screws.
Axle Pin (2)

Assembly
7
Handle
Mount
5/16”-18 Nut
1/4” x 3/4” Self
Drilling Hex Screw
5/16”-18 x 2” Bolt
5/16”- 18 Nut
5/16”-18 x 2 Bolt
Handle
Handle
Step 3: Attach handle mount to the frame
Attach the handle mount to the frame, as shown in the figure below, using (2) 5/16”-18 x 2” bolts
and (2) 5/16”-18 nuts. Position handle mount in center of frame. Using a drill and a 3/8 socket
bit lock handle mount into place with (2) 1/4” x 3/4” self drilling hex screws.
Step 4: Attach handle to handle mount
Attach the handle to the handle mount, as shown in the figure below, using (1) 5/16”-18 x 2 bolt
and (1) 5/16”-18 nut.

Machine Components
8
1. Wheel: Pneumatic wheel assembly.
2. Handle: Pivots in the handle mount to move out of the way during nonuse.
3. Handle Mount: Fastens the handle to the frame.
4. Axle Plate: Fastens the axle to the frame.
5. Axle Channel: Fastens the frame to the axle.

Operation –Using the Water Pump Wheel Kit
9
Step One: Inspect/Repair
If the water pump wheel kit has been used previously, it must be prepared BEFORE EACH
SUBSEQUENT USE.
WARNING
Read instructions below carefully for inspecting and preparing the water pump wheel kit.
Damaged or missing components could result in injury to the operator or bystanders.
Important safety rules:
Replacement parts. If a part needs replacement, only use parts that meet the manufacturer’s
specifications. Replacement parts that do not meet specifications may result in a safety hazard or
poor operation of the water pump wheel kit.
1. Review safety
information
Review the “Important Safety Information” section provided in this
manual.
2. Inspect & repair
Inspect and test the water pump wheel kit thoroughly
a. Check Tires for proper pressure level.
b. Check to be sure that all nuts and bolts are tight.
3. Transport
Grab the grip on the handle of the wheel kit and PULL the water pump
to desired location.
DO NOT PUSH the water pump as injury to the operator could result.
Specifications
The manufacturer reserves the right to make improvements in design and/or
changes in specifications at any time without incurring any obligation to install
them on units previously sold.
Any Questions, Comments, Problems or Parts Orders
Call North Star Product Support 1-800-270-0810
109172 –Water Pump Wheel Kit
Recommended Tire Pressure
14 PSI
Overall Dimensions (boxed)
22”L x 12”W x 6” H
Weight
14 lbs

109172 Exploded View –Rev B
10
Item
Part Number
Description
Qty.
1
82124
5/8” – 11 x 4” Bolt
2
2
789074
Wheel
2
3
30747
Grip
1
4
782021
Handle
1
5
82233
5/16” – 18 x 2” Bolt
3
6
82287
1/4” x 3/4” Self Drilling Hex Screw
4
7
82020
5/16” Nyloc Nut
1
8
782132
Handle Mount
1
9
82019
5/16” Flange Nut
6
10
82125
5/8” Hex Nut
4
11
782000
Axle Channel
2
12
782023
Axle Plate
2
13
82127
5/8” Lock Washer
2
14
82088
5/16” – 18 x 3/4” Bolt
4