
Information is subject to change without notice
LIBRA www.northcliffe.org
APPLICATION: For informational purposes when electricity supply fails. Suitable for escape routes and open areas.
AUTO-TEST INSTRUCTION:
After the emergency light is installed:
1. An automatic test will conduct once monthly for emergency lighting for 10 minutes. The light will return to normal operation after 10
minutes.
2. An automatic test will conduct once yearly for emergency lighting for 3 hours. The light will return to normal operation after 3 hours.
3. If the emergency duration is less then the specified time, the red indicator on the light will flash.
CHARACERISTICS:
•Power supply (mains): 220-240V 50Hz
•Charge time: 24 hours
•Battery type: NiCd
•IEC protection class: I
•Ingress protection level: IP65
•Mechanical impact resistance: IK08
•Ambient temperature: 0°C to +40°C
•Recognition distance 25m
•Network power supply and battery charge LED indicator
•Electronic protection against complete battery discharge
•Compatibility with standard specifications PN-EN 60598, PN-EN 1838
TECHNICAL SPECIFICATIONS:
•Light source: LED 1.2W diodes
•Emergency operation time: 3h
•Internal fuse: 250 V; 500 mA
•Battery life: max. 4 years
MATERIALS: Plastic polycarbonate body, polycarbonate lampshade
Description of LED indicator signals:
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health, deriving from
inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder
of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.