Northeast Color PF1161 Original operating instructions
northeastcolor.com/installations 603.436.8210
Prior to the clock installation, a recessed single-gang outlet (supplied by others) is to be installed behind
the clock (in accordance with National Electrical Code). Use the drawing below to plan the clock location.
SITE PLANNING
36.0"
44.5"
Keyholes
Clock Body Hardware
Outer Rim
Recessed Single Gang
Electrical Outlet
(Supplied by Others)
Center Behind Clock
Arlington DVFR1W Recessed Electrical/Outlet
Mounting Box, Single Gang
RECOMMENDED RECESSED OUTLET BOX
(Supplied by Others)
WHAT'S IN THE BOX
Clock
12v Power
Supply (2) 1-1/4" Screws
(2) Wall Anchors
northeastcolor.com/installations 603.436.8210
Pre-Drilled Hole (1/4")
Single Gang Recessed USB
Outlet to be Installed Prior to
Clock Mounting
(Supplied/Installed by Others)
12v Power Adapter
Pre-Drilled Hole (1/4")
Wall Anchor & Screw X2
(Included)
Wall Anchor & Screw X2
(Included)
Clock Hangs on Screw Using
Keyholes of Back Side of Clock
KeyholeKeyhole
CLOCK INSTALLATION
Two Persons are
Recommended
for this Installation
northeastcolor.com/installations 603.436.8210
Clock Face
Clock Face Touch Controls
Remote
Control
1. Press A to start the time setting function.
2. Press Bto modify the hour.
3. Press A to enter the hour setting & activate the minutes.
4. Then press Bto modify the minutes.
5. Finally press Cto end the time setting.
CLOCK OPERATION GUIDE
Setting the clock can be done from the clock face or using the remote control.
** Be sure to store the remote control in an easy-to-find location. **
Table of contents
Other Northeast Color Clock manuals
