Northern Diver Varilux Travel II User manual

INCLUDED
- 26650 battery x 1
- Battery charger x 1
- Car adapter x 1
- Spare O ring x 1
- Tail cap/handle lubricant x 1
SPECIFICATION
Material: Anodised aircraft 6061 aluminium
Colour: Silver/grey
LED: 1x CREE XM-L2
LED lifespan: 100000 h
Brightness: 1000 lm
Light colour: White
Mode: High/dimming
Battery: 26650 3.7 V, 4000 mAh
Switch design: Magnetic induction switch
Lens: Coated glass lens
Size: 161 x 45 mm (length x head diameter)
Weight (torch): 232 g
Weight (torch and batteries): 324 g
www.ndiver.com. Telephone: [phone]. Email: [email protected]. Write to: East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK.
100 m (depth rating)
1000 LUMENS 80 - 1000 LUMENS 80 LUMENS
2 hours 2 - 30 hours 40 hours
1000 m (beam distance)
30000 cd (peak beam intensity)
1 m (impact resistance)
STANDARD HIGH POWER MID POWER LOW POWER
NOTICE
This data may vary depending on environmental conditions.
STRUCTURE
USER MANUAL
WARNING
1. The battery must be inserted positive end first. Do not insert the battery the
wrong way.
2. Do not use different batteries to the one provided.
3. Do not use the battery if it is damaged.
4. When storing the torch, unscrew the handle or the tail cap to ensure the
power is cut off.
5. After every dive, clean the torch with fresh, clean water and dry prior to
storage. Salt water residue can corrode the torch surface.
6. Ensure that the tail cap and handle are lubricated regularly. A container of
lubricant comes with your torch.
7. Avoid any impact on the glass lens.
8. Do not shine the light directly into eyes.
BATTERY INSTALLATION
Open the torch by unscrewing the handle or the tail cap by hand. Insert the
battery positive end first (facing the switch), taking care not to disturb the
O rings. Do not insert the battery the wrong way. Reclose the torch.
OPERATION
1. The torch is operated by the top-mounted induction switch. Press once to
switch the light on. Now you can press and hold to gradually decrease the
output. Release the switch when you reach the desired output. Press once to
switch the light off.
2. When the torch is turned on, the ring around the switch will emit a constant
green light. When the torch is turned off, the green light will flash every 5
seconds. This is to help the user locate the torch, for example in darkness or if it
is dropped. The light will turn red when approximately 20% of the battery’s
charge is remaining. When the torch is not in use, the handle or the tail cap
should be unscrewed and the battery should be removed.
CHARGING
Your charger comes with instructions.
Ensure that you read and understand them prior to use.
WARRANTY
1. Your torch is covered by a full 12 month warranty.
2. If a fault occurs within 14 days due to a manufacturing defect, your torch
will be replaced (proof of purchase required).
3. After 14 days and within 12 months of purchase, your torch will be
repaired or replaced (excludes accidental damage or damage caused by
misuse).
4. Outside the 12 month warranty period, your torch will be repaired at cost
(if repairable).
5. In all cases, inward and outward shipping will be the customer’s responsibility.
The warranty does NOT cover the following:
1. Damage caused by disassembly or modification.
2. External cosmetic damage caused by normal use or misuse.
3. Damage caused by incorrect battery insertion or battery leakage.
If you have any queries, please contact your local Northern
Diver distributor. Alternatively, feel free to contact us.
Our contact details are below.
80 - 1000 LUMENS | RECHARGEABLE
Travel II
Handle
Head
Battery
Tail cap
+-
Induction switch
See paragraph 2 under ‘operation’,
ref charge warning light.

CHARGER INSTRUCTIONS
80 - 1000 LUMENS | RECHARGEABLE
Travel II
1. Insert the smaller end of the USB cable into the corresponding port
on the charger.
2. Ensure you insert the battery into the charger the correct way, i.e.
with the battery’s poles (- and +) touching the corresponding
terminals. The correct battery position is labelled on the charger.
3. “NC” displayed on the charger’s screen denotes that there is no
battery inserted or the battery is not charging. The screen may
display “NC” for a moment when the battery is inserted. It will then
charge normally.
4. If the screen continues to display “NC”, check the battery is inserted
correctly.
5. The charger will display the battery’s current voltage and overall
charging progress. “100%” displayed on the screen denotes that
charging is complete.
6. The button above the screen allows you to toggle between a 0.5A
current and a 1A current. the 1A current is twice as quick to charge
as 0.5A, but the 0.5A current will charge the battery more efficiently
and slightly prolong the length of time to the next charge.
+
-
( + ) ( - )
+
-
7. Battery charge time is 4 hours at 1A and 8 hours at 0.5A. When the battery has finished charging, disconnect the charger from the power source
(switching off the power source if necessary), and remove the battery from the charger. It is normal for the battery/charger to become warm when charging.
1.0A 0.5A
WRIST MOUNT INSTRUCTIONS
1. The wrist mount should be worn with the curved part at
the back of the hand (straight part at the front of the
hand).
2. The rear strap goes under the wrist, then through the
buckle.It is then secured with the Velcro - adjust as
necessary until you have a secure fit.
3. The front strap goes under and around the palm/top of the
hand, through the buckle and secured with the Velcro, like
the other strap.
4. The torch mounts on the plastic base and is secured with
the removable, adjustable rubber strap.
5. Notice the three notches on one side of the
rubber strap and the single notch on the other
side. First fit the single notch beneath either of
the two lips, depending on your preference -
the lips are found on the long sides of the
plastic base.
6. Now place the torch on the base, pull the rubber
strap over it, and attach one of the three notches
beneath the lip, depending on the size of the torch*.
Please ensure that the torch is fitted tightly to the
base and that both notches are fully fitted beneath
each clip.
*The wrist mount is recommended for use with our Varilux Micro R, Travel II R and Tec torches.