Northern Diver SRE SQUEEZE LOCK KNIFE User manual

USER MANUAL
Thank you for your purchase
Check you have received all parts as listed to the right. Should you require any assistance contact Northern Diver and we
would be happy to help, contact details can be found at the bottom of this page.
Warning - this knife is extremely sharp and can inflict serious injury. Keep out of childrens reach.
Care and maintenance
Rinse the knife and sheath with fresh water after contact with salt/contaminated waters
Leave to dry naturally or lightly towel dry
Store in a dry place, away from wet equipment
Rub the blade with steel wool to remove any signs of corrosion
CAUTION!
DO NOT attempt to disasseble the knife for cleaning
Locking mechanism operation
To remove the knife from the sheath grip the knife handle and squeeze the red side wings together with your thumb and
index finger to release the secure locking system. You can then remove the knife from the sheath.
To house the knife in the sheath: insert the knife into the sheath until it locks into place. You will hear a click as the knife
secures in place. The knife can be house inside the sheath facing either side.
Warranty information
All Northern Diver knives carry a 12 month manufacturer warranty. Includes the knife to be free from defects in material
and/or workmanship under normal scuba/in-water use provided the proper care and maintenance has been performed as
instructed. Warranty does not cover damage from accident, abuse, tampering, lack of maintenance, theft or loss. In the
event of a warranty claim please download a returns form from our website, www.ndiver-rescue.com, fill in the form and
return to the specified address.
Website: www.ndiver-rescue.com
Oce: [phone]
Email: [e-mail]
Address: Unit 5, East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK
V.02.24082020
316 S/S
1x knife
1x sheath
3x screw caps
What’s included?
Parts breakdown
2mm hole
Plastic sheath
Plastic handle/grip
75mm long blade
316 stainless steel marking
Serrated edge Line cutter Easy squeeze secure locking system
SQUEEZE
LOCK KNIFE

1. Unscrew all 3x plastic screw caps from the sheath
2. Gently lift back of sheath
3. Position webbing inbetween screw holes
4. Screw in each of the 3x plastic screw caps to secure
Attach to webbing
WEBBING/BELT
USER MANUAL
Website: www.ndiver-rescue.com
Oce: [phone]
Email: [e-mail]
Address: Unit 5, East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK
V.02.24082020
Attaching to knife dock on Northern Diver BCD range
SQUEEZE
LOCK KNIFE
KNIFE
DOCK
1. Remove the yellow plastic back plate from the back of the sheath
This is not needed when attaching to a BCD
2. Position the sheath over the eyelets on the knife dock
3. Screw in the caps from inside the BCD pocket
We suggest . . .
When attaching the knife to your kit
we suggest to use Loctite Threadlocker
to secure and prevent loosening