Northern Diver Varilux 3500 User manual

USER MANUAL
INCLUDED
- Varilux 3500 V19 torch x 1
- 26650 battery x 2
- Intelligent digital battery charger x 1
- Spare O ring x 1 (minimum)
- Tail cap lubricant x 1
- Hard storage case x 1
- User manual x 1
SPECIFICATION
Material: Anodised aircraft 6061 aluminium
Colour: Silver/grey/blue
LED: 4x CREE XM-L2
LED lifespan: 100000 h
Brightness: 3500 lm
Light colour: white
Mode: High/dimming
Battery: 26650 3.7 V, 5200 mAh
Switch design: Magnetic slide switch
Lens: Coated glass lens
Size: 217 x 69 x 130 mm
(length x head diameter x handle length)
Weight (torch): 586g
Weight (torch and batteries): 772g
Weight (torch, batteries and charger): 924g
Please note weights are approximate
STANDARD HIGH MID LOW
100 metres (depth rating)
3500 LUMENS 3500 - 200 LUMENS 200 LUMENS
2 hrs 2 - 40 hrs 50 hrs
1000m (beam distance)
90000cd (peak beam intensity)
0.5m (impact resistance)
NOTICE
This data may vary depending on environmental conditions.
STRUCTURE
WARNING
1. Batteries must be inserted positive end first.
Do not insert batteries the wrong way.
2. Do not use different batteries to the ones provided.
3. Do not use a battery if it is damaged.
4. When storing the torch, unscrew the tail cap to ensure the
power is cut off.
5. After every dive, clean the torch with fresh, clean water and
dry with a cloth. Salt water residue can corrode the torch
surface.
6. Ensure that the tail cap is lubricated regularly.
A small bottle of lubricant is supplied with your torch.
7. Avoid any impact on the torch.
8. When the batteries are fully charged, switch off the charger
and remove the batteries from the docking station.
9. Do not shine the light directly into eyes.
BATTERY INSTALLATION
Insert both batteries positive end first, and close the tail cap,
taking care not to disturb the O rings. Do not insert batteries the
wrong way. If the battery doesn’t fit, please check the
battery’s orientation and not force into the battery mount.
If the battery is forced to set with a different polarity, the
battery may catch on fire, smoke, explode, or cause heat
generation.
OPERATION
The torch is operated by the top-mounted slide switch.
Use this to vary the torch output.
CHARGING
The Varilux 3500 V19 is powered by Keeppower high spec
batteries and intelligent digital battery charging. See charging
instructions on the reverse.
WARRANTY
1. Your torch is covered by a full 12 month warranty.
2. If a fault occurs within 14 days due to a manufacturing
defect, your torch will be replaced (proof of purchase
required).
3. After 14 days and within 12 months of purchase, your torch
will be repaired or replaced (excludes accidental damage or
damage caused by misuse).
4. Outside the 12 month warranty period, your torch will be
repaired at cost (if repairable).
5. In all cases, inward and outward shipping will be the
customer’s responsibility.
The warranty does NOT cover the following:
1. Damage caused by disassembly or modification.
2. External cosmetic damage caused by normal use or misuse.
3. Damage caused by incorrect battery insertion or battery
leakage.

Write to: East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK
Visit our website : www.ndiver.com, telephone: [phone] or email: [email protected] V.01.02102018
Please read this manual carefully before use.
1. When you receive the torch, the batteries will have 50%
charge in them. Before using the torch, charge the batteries
until they are full. This will take 3-4 hours on the 1A charging
current.
2. The charger button toggles between the 0.5A and 1A
charging current. We recommend using the 1A charging
current for charging the Keeppower batteries supplied with
the Varilux 3500.
3. On the 1A setting, normal battery charge time is 4-5 hours.
4. A long press of the button switches the LCD display on/off.
5. If ‘Err’ is shown on the display, check the battery poles are
touching the correct terminals.
6. The correct battery polarity is labelled on the charger.
ACCESORIES
The following accessories are included with the L2 charger.
1. USB cable
2. USB power adapter
SPECIFICATION
1. Digital LCD readout
2. Compatible with rechargeable Li-ion battery 26650 / 18650 /
18500 / 18350 / 17670 / 17500 / 16650 / 16340 / 14650 /
14500 / 14430 / 10440
3. Input: micro USB DC 5.0V 2.0A
4. Output: 4.2V ± 1% 0.5A/1.0A
5. Dimension of L2 charger: (L) 130.0* (W) 68.0* (H) 33.0mm
6. Weight in box: 318g ± 2g
WARRANTY
All KeepPower products enjoy a comprehensive after sale
warranty service. KeepPower Li-ion battery chargers can be
exchanged for replacements within 14 days from the date of
purchase. After 14 days, all defective/malfunctioning
KeepPower chargers will be repaired free of charge for a
period of 24 months from the date of purchase.
KeepPower will provide free maintenance service but charge
for replacement parts beyond 24 months.
The warranty is nullified in any of the following situations:
1. The product(s) is/are broken down, reconstructed and/or
modified under unauthorised conditions.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
If you have any queries, please contact your local Northern
Diver distributor, or contact us directly at [e-mail]
or tel: + 44 1257 25 44 44.
LI-ON BATTERY CHARGER L2
FOR USE WITH RECHARGEABLE
LI-ION BATTERY ONLY