Northern KP-10 User manual

KP-10, KP-11
KP-12, KP-13
KEYPADS
ACCESS
CONTROL
SOLUTIONS
The Northern Computers' KP-10, KP-11, KP-12, and KP-13
keypads offer security without the use of a card. The users need only
enter their personal numerical code to gain access.
The unsurpassed ability of these keypads to tolerate virtually any
environment enables them to function reliably in extreme climate
conditions, yet their aesthetic design allows for installation inside any
office building. The KP-10 and KP-11 keypads are constructed out of
stainless steel. The KP-12 and KP13 keypads are constructed of a
durable plastic.
The piezo technology allows the keypads to be activated by user touch,
without any moving parts or contacts that can corrode over time. An
audible beep and visual indication are generated with each key pressed.
The elimination of moving parts gives these keypads unquestioned
dependability.
The KP-10 and KP-12 keypads can also be used in conjunction with a
card reader of choice to provide a higher level of security.
BENEFITS
Rugged stainless steel construction
Impact and weather resistant
Designed for indoor and outdoor use
Status monitoring LEDs
LED power indicator
Vandal resistant
No moving parts to wear out
Audio/visual feedback
KP-10 and KP-12 provide 2 of 7 matrix output
KP-11 and KP-13 emulate a 32 bit Wiegand output
KP-11 and KP-13 are selectable for 5 or 12 volts
KP-11 and KP-13 have programmable site code

KP-10, KP-11
KP-12, KP-13
5007 South Howell Ave.
Milwaukee, WI 53207
www.nciaccessworld.com
Tel: [phone]
[phone]
Fax: [phone]
Specifications subject to change without notice.
© 2001 Northern Computers, Inc. All rights reserved.
ORDERINGINFORMATION
Weatherized Keypads
KP-10
12 wire, stainless steel
KP-10-BRASS
12 wire, brass
KP-11
5 wire, 32 bit Wiegand output
stainless steel
KP-11-26
5 wire, 26 bit Wiegand output
KP-11-ABA
5 Wire, ABA output
KP-12
12 wire, stainless steel
KP-12-BRA
12 wire, braille
KP-12-BRS
12 wire, brass
KP-12-ILL
12 wire, illuminated
KP-13
5 wire, 32 bit Wiegand output
KP-13-26
5 wire, 26 bit Wiegand output
KP-13-BRA
5 wire, braille
KP-13-BRS
5 wire, brass
KP-13-ILL
5 wire, illuminated
Consult your Northern Sales
Representative for more
information.
SPECIFICATIONS
• Dimensions
KP-10/KP-11 - 5.125" H x 3.375" W x .50" D
(13.018 cm H x 8.573 cm W x 1.27 cm D)
KP-12/KP-13 -7.50" H x 1.75" W x .75" D
(19.05 cm H x 4.445 cm W x 1.905 cm D)
• Weight - 16 oz (470 gm)
• Operating Temperature - –40° F to 160° F (–40° C to 71° C )
100% relative humidity (weather resistant)
• Mounting Methods
KP-10/KP-11 - Directly to a single gang switchbox or surface
mount by direct wiring through a wall
KP-12/KP-13 - Mullion or surface mountable
• Cabling -
KP-10/KP-12 - Requires 12 conductor (0.75 mm) shielded cable,
12 wire, 18 AWG, NC18121-YL-500 or
NCP1821-YL-500 (Plenum),
maximum distance: 500 ft (152 m)
KP-11/KP-13 - Requires 5 conductor with overall shield cable,
5 wire,18 AWG NC1861-BL-500 or
NCP1861-BL-500 (Plenum),
maximum distance: 500 ft (152 m)