Activate Keypad
Remove front plate to install
batteries and wait for the
keypad to start beeping.
mastercode mastercode
(example: 123456 123456 )
Connect Keypad to Invited lock
Use ‘add key’ procedure on lock:
- Set switch 1 on the lock to ‘ON’
- Press master remote control 1x long,
1x short
- Lock starts flashing green LED
Enter master code on keypad:
mastercode
Manage Codes
Add one-time code:
1 mastercode one-time code
Add permanent code:
3 mastercode new code
Change code:
4 mastercode old code new code
Remove code:
5 mastercode old code
Remove all codes: (except mastercode)
6 mastercode mastercode
A long beep and green LED on the
lock confirm successful connection.
Set your own master code
(5 - 9 digits):
1 2 3
4 5 6
7 8 9
0
Installation Operating
Open lock
Press on keypad:
your code
Add code with validity of 24 hours
2 mastercode new code
