Soyal AR-331H User manual

SOYAL
ACCESS CONTROL SYSTEM
®AR-321 (H) / AR-331 (H) /
AR-721(H) / AR-725 (H) / AR-757 (H) V140707
e x1
e x1
f x2
f x2
f x2
c x2
A.
A1.
A2. A3.
B.
E.
B.
C.
F.
C. H.G. D.
D.
b x2
a x2
c x2
d x2
c x2
g x1 h x1
P1
P1
P1
P1
P1
P7
P2
P2
P2
P2
P2
P3
P3
P3
P3
P3
P4
P4
P4
P4
P4
P6
AR-331 (H) AR-331 (H-S)
AR-721RB
AR-821RB
Contents
AR-331 (H): Touch-panel Metal Housing / AR-331 (H-S): Metal Housing
AR-321 (H): Touch-panel Metal Housing
AR-721 (H)
AR-725 (H): Illuminated Touch-panel
AR-757 (H)
AR-725 (H-M)
or
[Optional]
Digital Relay
Original Relay
WG keyboard
or
AR-725 (H)
AR-725 (X)
1Product
1Product
1Product
1Product
1Products
1Products
1Products
3User Guide 2Optional
2User Guide
2User Guide
2User Guide
2User Guide
2User Guide
4Terminal Cables
3Terminal Cables
3Terminal Cables
3Terminal Cables
3Terminal Cables
3Terminal Cables
5Tools
4Tools
4Tools
4Tools
4Tools
4Tools
2Tools
5Water proof Strip
Parts Description
Button Head Pozidriv
Tapping Screw: M3x10
Security Torx Screw:
M3.5x15
Flat Head Cap Philips
Tapping Screw: 4x19.1
Button Head Pozidriv
Slotting Screw: 2.5x10
Flat Head Hex Socket
Screw: M3x8
Flat Head Cap Philips
Tapping Screw: 4x38
a.
e. f.
b. c. d.
Security Torx Screw: M3x10 Security Torx Wrenches
g. h.
※ Additional external relay must be purchased.

V140707
4
2C.
1
c.
A.
B.
3
4
5
A. B. C.
6
A.
B.
D.
7
8
A.
C.
d.
F.
1A1.
F.
E.
2
4
5
e.
3
A3.
A1.
G.
1
2
3
e.
b. A2.
A1.+A3.
H.
4
5
5
a.
D.
4
41
2
3
2
3
4
5
16
Access Controller
Touch-panel Metal Housing / Illuminated Touch-panel
Installation
AR-321 (H)
AR-721 (H)
AR-725 (H)
AR-331 (H) / AR-331 (H-S)
AR-757 (H)
AR-725 (H-M)
AR-725 (H)
AR-725 (X)
Pull the cables from the square hole of the mounting plate.
Use a screwdriver to screw the mounting plate onto the wall.
Attach the water proof strip to the body, then connect the terminal cables to the body and attach the
body to the mounting plate.
Use the Allen key and screws (accessories supplied) to assemble the body onto the mounting plate.
Turn on the power, and LED will light and beep will sound.
Pull the cables from the square hole of the mounting plate.
Use a screwdriver to screw the base onto the wall.
Connect the terminal cables to the body and attach the body to the mounting plate.
Assemble the covers with the Allen key and screws (accessories supplied).
Turn on the power and LED will light and beep will sound.
Pull the cables from the square hole of the mounting plate.
Use a screwdriver to screw the base onto the wall.
Connect the terminal cables to the body and attach the body to the mounting plate.
Assemble the covers with the Allen key and screws (accessories supplied).
Turn on the power and LED will light and beep will sound.
Pull the cables from the square hole of the mounting plate.
Use a screwdriver to screw the base onto the wall.
Embed the water proof strip 3onto the frame side of the base.
Connect the terminal cables to the body and attach the body to the mounting plate.
Assemble the covers with the Allen key and screws (accessories supplied).
Turn on the power and LED will light and beep will sound.
Pull the cables from the square access hole of the mounting plate C.
Use a screwdriver to screw the metal plate Conto the wall.
Take off the plastic mounting plate Bfrom the body A, and pull the cables
through the access hole of Cand B, then connect to the body A.
Assemble plate Bwith the body A, and embed the water proof strip D
onto the plastic side frame.
Assemble the body Aonto the mounting plate Cwith the Allen key and
screws (accessories supplied).
Turn on the power and LED will light and beep will sound.
Use a screwdriver to screw the base F onto the wall.
Attach the water proof gasket to the body A1, and pull the cables
from the square hole of the base F, and connect to the body A1.
Assemble the body A1 with the base F.
Screw A1 and F tight with the Allen key and screws (accessories
supplied).
Turn on the power and LED will light and beep will sound.
Put on G, and attach A1 onto the plastic plate A3, and screw it with
the Allen key and screws (accessories supplied).
Put the ring O on the metal frame, and put them together onto the
reader A1+A3, and screw them and buckle up the 4 buckles on the
back.
Embed the water proof strip Donto the frame side of the base.
Following by the install process of AR-725 (H-M)
Remove the rubber plug.
To cut tamper-resistant column and make it fit the appropriate
height for actual installation.
First, take off the metal casing then screw the controller on the wall.
Second, put the metal casing back and lock it with security screw.
Finally, put the rubber plug into the hole.
Turn on the power, and LED will light and beep will sound.

SOYAL
ACCESS CONTROL SYSTEM
®AR-321 (H) / AR-331 (H) /
AR-721(H) / AR-725 (H) / AR-757 (H) V140707
AR-321H
P4
P6
P1
P2 P3
P4
P5
P1
P2
P3
P4
P5
P1
P2
P3
P4 P5
P1
P2
P3
P1
P2
P3
P4 P5
P1
P2
P3
P4
P5
125kHz
125kHz
125kHz
125kHz
13.56MHz
13.56MHz
13.56MHz
13.56MHz
P7
LED
LED
10 98765432
P4
P6
P1
P2
P3
125kHz 13.56MHz
P1Cable :
P2Cable :
P3Cable :
P4Cable : (Contact Rating: 1A 125VAC/24VDC)
P5Cable : (Optional)
P6Cable :
P7Cable : (Directly connected at the Access controller)
Wire Application
Wiegand
Beeper
Wiegand
Pin
1
2
3
4
5
Color
Thin Blue
Thin Green
Pink
Brown
Yellow
Description
Wiegand DAT:1 Input
Wiegand DAT:0 Input
Beeper Output 5V/100mA, Low
LED Green Output 5V/20mA, Max
LED Red Output 5V/20mA, Max
Wire Application
Networking
Module
Pin
1
2
Color
Thick Green
Thick Blue
Description
RS-485(B-)
RS-485(A+)
※After S/N: 0706-XXXXXX
Wire Application
Tamper Switch
Pin
1
2
3
Color
Red
Orange
Yellow
Description
N.C.
COM
N.O.
Wire Application
3-PIN Connector
Pin
1
2
3
Color
Black
White
Purple
Description
GND.
Duress
Arming/ Security trigger signal
Wire Application
Doorbell
Arming
Duress
LED indicator
Pin
1
2
3
4
Color
Brown White
Red White
Yellow White
Green White
Description
BE Output
AR Output/ Security trigger signal Output
DU Output/ TTL out
Hi input/ Green light brighten
AR-321 (H)
AR-721 (H)
AR-331 (H) / AR-331 (H-S)
AR-725 (H)
AR-757 (H)
Wire Application
Lock Relay
Common-COM-Point
Door contact
Exit Switch
Alarm Relay
Power
Wire Application
Exit Switch
Networking Module
Networking Module
Alarm Relay
Door contact
Beeper
Tamper Switch
Lock Relay
Power
Pin
1
2
3
4
5
6
7
8
Pin
1
2
3
4
6
7
8
9
10
11
12
13
14
15
5
Color
Blue White
Purple White
White
Orange
Purple
Gray
Thick Red
Thick Black
Color
Thick Black
Thick Red
Purple
Thick Green
Thick Blue
Yellow White
Orange White
Gray
Orange
Brown
Yellow
Pink
Thin Blue
Thin Green
Description
(N.O.) DC24V1Amp
(N.C.) DC24V1Amp
(COM) DC24V1Amp
Negative Trigger Input
Negative Trigger Input
Low output; Max 12V/100mA (Open Collector)
DC Power 12V
DC Power 0V
Description
DC Power 0V
DC Power 12V
Negative Trigger Input
RS-485(B-)
Low output; Max 12V/100mA (Open Collector)/
Security trigger signal Output
RS-485(A+)
N.O.
COM
Low output; Max 12V/100mA (Open Collector)
Negative Trigger Input
LED Green Negative Output 5V/20mA, Max
LED Red Negative Output 5V/20mA, Max
Beeper Negative Output 5V/100mA, Low
Wiegand DAT:1 Input
Wiegand DAT:0 Input
Connector Table
AR-321 (H)
AR-331 (H)
AR-721 (H)
AR-725 (H)
AR-757 (H)
Connectors Comparison
P1 P2 P3 P4 ( Optional)P5
P7 P8
P1 P2 P3 P4 ( Optional)P5
P1 P2 P3 P4 ( Optional)P5
P1 P2 P3 P4 P6
Notice
The communication wires and power line should NOT be bound in the same conduit or tubing.
Don’t equip controller and lock with the same power supply. The power for controller may be unstable when the lock is activating, that may make
the controller malfunction.
The standard installation: Door relay and lock use the same power supply, and controller use independent power supply.
Use AWG 22-24 Shielded Twist Pair to avoid star wiring.
1.Tubing:
2.Wire selection:
3.Power supply:
White

V140707
WG 1
WG 0
BZ
GLED
RLED
12V
GND
1
2
3
4
5
6
7
8
1
2
3
4
5
WG 1
WG 0
BZ
GLED
RLED
GND
12V
12V
GND
P2
P1
B-
A+
B-
A+
B-
A+
Host
CH1
CH2
1
2
1
2
1
2
1
2
1
2
GND
12V
A+
B-
B-
A+
B-
A+
B-
A+
B-
A+
B-
A+
P3
P3
P3
P3
P3
Node 1
Node 9
Node 8
Node 16
EXIT
1
2
3
4
5
6
7
8
1 2 3
N.C.
N.O.
COM
CTL
12V
GND
PB
12V
GND
12V
GND
12V
GND
ARM P1
P5
AR-721RB
N.C.
N.O.
COM
CTL
1
2
3
4
5
6
7
8
12V
Door Contact
ALM
12V
GND
12V
GND
12V
GND
N.C.
12V
GND
P1
EXIT
1
2
3
4
5
6
7
8
N.C.
COM
PB
12V
GND
12V
GND
12V
GND
12V
GND
N.O.
P1
EXIT
1
2
3
4
5
6
7
8
12V
GND
12V
GND
12V
GND
N.O.
N.O.
COM
PB
12V
GND
P1
N.O.
12V
GND
EXIT
N.C.
N.O.
COM
CTL
12V
10
9
8
7
6
5
4
3
2
1
P7
N.O.
12V
GND
Lock
PB
12V
GND
N.C.
N.O.
COM
CTL
12V
10
9
8
7
6
5
5
4
4
3
3
2
2
1
1
1
1
1
1
1
N.C.
N.O.
COM
CTL
12V
P7
N.C.
Door
Contact
ALM
COM
N.O.
12V
GND
5
4
3
2
1
1
1
1
1
1
AR-331 (H)
AR-331 (H)
Access Controller
Touch-panel Metal Housing / Illuminated Touch-panel
Strengthen security with AR-721RB
Connect to Access Control for Connect to arming tools for
Connect to Reader
Alarm
Alarm
Tamper Alarm
ControllerReader
Controller
Controller
AR-716E
Controller
Controller
Controller
Controller
Controller
Converter
Node ID 001
Node ID 254
Door Contact
Door Contact
Relay Outpot Module
Relay Outpot Module
Alarm Relay
Tamper Relay
POWER
12VDC
POWER
12VDC
POWER
12VDC
POWER
12VDC POWER
12VDC
POWER
12VDC POWER
12VDC
POWER
12VDC
POWER
12VDC
Connect to Door Sensor
Connect to Networking
Request To Exit
Request To Exit
Electric Bolt
Electric Bolt
※ 1.Enable the security trigger signal: Please refer to the 34 DDD
2.Disable "Exit by RTE Button". (Please refer to the
20 DDD of function default value.)
Connect to Magnetic Lock or Electric Bolt
Electric Bolt
or
Magnetic Lock
Controller
Request To Exit
POWER
12VDC
POWER
12VDC
Connect to Electric Strike
Wiring Diagram
Electric Strike
Controller
Request To Exit
POWER
12VDC
POWER
12VDC
If use the AR-721RB,
please refer to the top of
the wiring diagram.
P7 P7

SOYAL
ACCESS CONTROL SYSTEM
®AR-321 (H) / AR-331 (H) /
AR-721(H) / AR-725 (H) / AR-757 (H) V140707
AR-321H
B-
A+
B-
A+
B-
A+
Host
CH1
CH2
10
9
8
7
6
5
4
3
2
1
12V
GND
AR-331 (H)
AR-331 (H)
P7
A+
B-
A+
B-
AR-716E
1
2
3
GLED
RLED
BZ
WG 1
WG 0
GND
12V
P7
GND
12V
12V
GND
331 (HB): 125kHz 331 (HD): 13.56MHz
CARD
CARD
5
4
3
2
1
1
1
1
1
1
10
9
1
2
3
4
5
6
7
8
5
4
3
2
1
1
1
1
11
External WG keyboard
Adding and Deleting Tag
M4/M8
Delete All Tags
Input 123456 (or Master Code) → 29 29
Delete Single Tag
Input 123456 (or Master Code) → 10 SSSSS EEEEE
[e.g.] Delete User Address: 00058
Enter program mode → 10 00058 00058
9
9
Delete a batch of Tags
Input 123456 (or Master Code) → 10 SSSSS EEEEE
[e.g.] Delete User Address: 00101~00245
Enter program mode → 10 00101 00245
9
9
Add a Single Tag or Random tags
Input 123456 (or Master Code) → 19 UUUUU 00001 → Present the tag(s) to Access Controller (single tag or random tags one by one)→ Done
[e.g.] Add 2 random cards to User Addresses No. 100 and No. 101:
Enter program mode → 19 00100 00001 → Present the tags one by one → Done
Input 123456 (or Master Code) → 19 UUUUU QQQQQ → Present the tag (only use the tag with the lowest number) → OK
Add a batch of Sequential tags
[e.g.] Add 20 pcs sequential tags (62312~62331) to User Address NO.101 ~ NO.120:
Enter program mode → 19 00101 00120 → Close Tag into RF Area (only use the tag NO.62312) → OK
Tag Information
(125kHz) ※ For Mifare tags, the separator between Site Code & Card Code is comma ",".
SITE CODE
CARD CODE
SITE CODE
CARD CODE
M6 ※In this mode, User Address = Card Code
※ If you want to program system on AR-331 (H-S) directly, please order WG keyboard then install it according to the following pattern.
Add Tags
Input 123456 (or Master Code) → 11 SSSSS EEEEE → OK
[e.g.] Add User Address: 00100~01254
Enter program mode → 11 00100 01254 → OK
Delete All Tags
Input 123456 (or Master Code) → 29 29
Delete Tags
Input 123456 (or Master Code) → 10 SSSSS (or )EEEEE → OK
[e.g.] Delete a tag with card code 62362
Enter program mode → 10 62362 62362 → OK
9
Reader
POWER
12VDC
Converter
POWER
12VDC
Connect to Reader for Connect to Networking for P7P7
Remove the Protection plug that at the right bottom.
(※Do not lose protection plug or it will affect the protection level.)
WG Keyboard cable will be connected to the pin board.
WG Keyboard connected to the controller from the bottom right of the hole.
When you nish programming system, please put protection plug back to
the controller.
AR-331 (H) Interaction Area
Metal controller's Presenting scope is smaller than others, and EM:331 (HB) / MIFARE:331 (HD) is different. Refer to the above picture.
※331 (HB) touch card-area for interaction. ※331 (HD) touch keyboard area for interaction.

V140707
Access Controller
Touch-panel Metal Housing / Illuminated Touch-panel
[e.g.] The anti-pass-back function of User Address 00154 has been enabled. After presenting the card to get in, the user doesn’t present the card to
leave. When s/he tries to present the card to get in again, since the in-in sequence violates the anti-pass-back rule, s/he will be rejected. To solve this
problem, you can reset it as follows. Enter program mode → 26 00154 00154 2 → Reset
Enable/Disable auto-open time zone
Enter program mode → 20 004 [004= enable Auto-Open Time Zone; 000= disable Auto-Open Time Zone]
Enable/Disable auto open door without presenting card
Enter program mode → 24 001 [001= enable Auto-Open Time Zone; 000= disable Auto-Open Time Zone]
[e.g.] Enable the anti-pass-back function of User Address from 00152 to 00684: 26 00152 00684 0
Enable card
Enter program mode → 26 SSSSS EEEEE N
[SSSSS= Starting User Address; EEEEE= Ending User Address; N=0(control)/ 1(Not control)/ 2(reset)]
Enable controller
Enter program mode → 20 DDD [128= Anti-pass-back(0=Disable; 1=Enable)/ 064=Entrance/Exit(0=Exit; 1=Entrance).]
Enter program mode → 20 128 (Please refer to function default value for details.)
[e.g.] Enable Anti-pass-back, and set to Exit door= (128 x 1) + (064 x 0) = 128
N: 2 sets of auto-open zone (N=0=1st set; N=1=2nd set)
HHMMhhmm=Staring time to ending time (e.g. 08301200=08:30 to 12:00)
7123456H= 7 days of a week (Sun/Mon/Tue/Wed/Thu/Fri/Sat) + Holiday (H= 0: disable; 1: enable); Holidays can be set via 701Client software.
Set up auto-open time zone
Enter program mode → 08 N HHMMhhmm 7123456H
[e.g.] To set the second time zone as 9:30 AM to 4:20 PM, Monday, Wednesday and Friday: 08 1 09301620 01010100 → Done
M4/M8: Private PIN
Card or PIN: Enter program mode → 12 UUUUU PPPP [e.g. User Address: 00001 and pass code: 1234, input 12 00001 1234 ]
Card and PIN: Enter program mode → 13 UUUUU PPPP [e.g. User Address: 00001 and pass code: 1234, input 13 00001 1234 ]
M6: Public PIN
Card or PIN: Enter program mode → 15 PPPP [Input 4-digit PIN, default value: 4321; PPPP=0000:
cancel the function of simply inputting PIN to get access ]
Card and PIN: Enter program mode → 17 PPPP [Input 4-digit PIN, default value: 1234; PPPP=0000: access mode will be "Card Only"]
Enter program mode → 00 NNN [Node ID: 001~254; if the access controller is connected to AR-716E, its Node ID will be 001~016.]
Usually, anti-pass-back is commonly applied to parking areas in order to prevent from multi-entry with one card at a time, or to locations that
need entry and exit control.
Door will remain open after the rst ashing card. There are 2 time zones supported when Standalone, and 63 time zones when connected to AR-716E.
Enter program mode → 28 064 [064= Double Door Control]
Controller with a reader to perform the "Double Door Control".
Enter program mode → 04 N [N=4/6/8]
D. Set up the password
E. Double Door Control (M4/M8)
F. Anti-pass-back (M4/M8)
G. Auto-Open Time Zone
B. Change the Node ID of Controller
C.Set up M4/M6/M8
H. Lift control
Enable
Enter program mode → 24 002 [002= enable lift control]
[e.g.] User Address NO. 168, only to the 6th and the 20th oor:
Enter program mode → 21 00168 0 00100000 → 21 00168 2 00001000
Multi oors
Enter program mode → 21 UUUUU S FFFFFFFF
[UUUUU=User Address S: 4 sets of lift control (Input: 0~3) FFFFFFFF: 8 oors setting (F=0: Disable, F=1: Enable)
Single oor
[e.g.] User Address NO. 45, allowed to access the 24th oor: 27 00045 24
Enter program mode → 27 UUUUU FF
UUUU=User Address FF=Floor number (01~32 oor)
Connect with AR- 401RO16B to control access oors of users.
Set Floor/ Stop
F
8
16
24
32
0
1
2
3
F
6
14
22
30
F
7
15
23
31
F
5
13
21
29
F
4
12
20
28
F
3
11
19
27
F
2
10
18
26
F
1
9
17
25
Please refer to below oor chart
Master Code modication
Enter program mode → 09 PPPPPPRRRRRR [Input the 6-digit new master code twice.]
[e.g.] Set the Master code to be 876112, input 123456 → 09 876112876112
Enter the program mode
Input 123456 or PPPPPP
[e.g.] The Default Value= 123456, if the Master Code is already changed= 876112, input 876112 → program mode entered
Exit the program mode
Input
Operation process
A. Enter / Exit Program Mode

SOYAL
ACCESS CONTROL SYSTEM
®AR-321 (H) / AR-331 (H) /
AR-721(H) / AR-725 (H) / AR-757 (H) V140707
Enable: Enter program mode → Disable: Enter program mode →
Factory Reset by its commands
When the device is Standalone (not networking)
Enter program mode → 20 016 → 24 064 → 26 00000 01023 1 → 28 000 → 29 29
※Note: if the Master Code has been changed, factory reset won't restore the Master Code to 123456.
Enable/Disable Arming status (for M4/M8; default value of arming PWD is: 1234) :
Standby Mode
Enter Program Mode
After door open
The normal procedure to open door → Input 4-digit arming PWD →
Do not open the door
→ Input 4-digit arming PWD → Present a valid card
※ [The normal procedure to open door] can refer to [Access Mode].
I. Setting Up the Arming
Alarm conditions:
1. Arming is enabled
2.Alarm system connected
Application:
1. Door open too long: Door is open longer than door relay time plus door close time.
2. Force open (Opened without a valid user card): Access by force or illegal procedure.
3. Door position abnormal: Arming is enabled and the power is suddenly off then on.
Function Default Value
M4 / M6 / M8
AR-321 (H) / AR-331 (H) / AR-721 (H) / AR-725 (H) / AR-757 (H)
AR-321 (H) / AR-331 (H) / AR-721 (H) / AR-725 (H) AR-757 (H)
20 DDD
Function Selection Value Application
※Default Value
Time Attendance
Auto Relock
Auto Open
Exit by RTE Button
Master Controller of Network
Entrance/Exit
Anti-pass-back
※0: Yes
※0: Disable
※0: Disable
0: Disable
※0: Slave
※0: Exit
※0: Disable
Networking
Networking/Standalone
Networking/Standalone
Networking/Standalone
Networking
Networking
Networking
001
002
004
016
032
064
128
1: No
1: Enable
1: Enable
※1: Enable
1: Mater
1: Entrance
1: Enable
24 DDD
Function Selection Value Application
※Default Value
Auto Open without Presenting
in Auto-open Time Zone
Alarm Output/ Lift
Control
Stop Alarm by pressing RTE
Button or Closing the Door
Doorbell
※0: Disable
※
0: Alarm Output
0: None
※0: Disable
Networking/Standalone
Networking/Standalone
Networking/Standalone
Networking/Standalone
001
002
064
128
1: Enable
1: Lift Control
※ 1: Yes
1: Enable
Function Selection Value Application
Auto Open without Presenting
in Auto-open Time Zone
Lift Control/
Duress Function
Stop Alarm by pressing RTE
Button or Closing the Door
※0: Disable
※
0: Duress
0: None
Networking/Standalone
Networking/Standalone
Networking/Standalone
1: Enable
1:Lift Control
※1: Yes
24 DDD ※Default Value
001
002
064
28 DDD
Function Selection Value Application
※Default Value
Double Door Control
Force Open Alarm Output
※0: Disable
0: Disable
Networking/Standalone
Networking/Standalone
064
128
1: Enable
※1: Enable
※ M6: the user capacity can be 65535 because it only reads 5-digits CARD CODE, while in M4/M8 it reads both SITE CODE and CARD CODE(10 digits).
Select the desired function, Weighted Value =
Selection Index (0 or 1) x Value.
[e.g.] DDD (total weighted value of all functions):
Enable "Auto Open" + "Exit by RTE Button" + "Anti-
pass-back"=1*004 + 1*016 + 1*128=148; As a result
of that, the command will be 20 148 .
65,535
Mode
Networking/
Standalone
Standalone
Networking/
Standalone
Networking/
Standalone
User
Capacity Access Mode
M4
M6
M8
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
32
No
32
11
No
11
No
Auto-show
Duty time
Event log
Capacity
120
Holidays
Duress
Function
Time
Zone
Lift
Control
Anti-pass-
back
1.Card only
2.Card and PIN
(4-digit PIN) +
3.User Address
(5-digit) + PIN (4-digit Private PIN) +
1.Card only
(using 17* command to set Arming PWD as 0000)
2.Card and PIN
(4-digit public PIN= Arming PWD)
+
3.Card or PIN
(4-digit public PIN= Duress code)
1.Card only
2.Card and PIN
(4-digit Private PIN)
+
3.Card or PIN
(4-digit Private PIN)
1,024
3,000
{721 (H)/757 (H)}
{321 (H)/331 (H)/
725 (H)}
1,024
3,000
1,200 721 (H)
1,500
321 (H)/331 (H)/
725 (H)
3,000 757 (H)
{721 (H)/757 (H)}
{321 (H)/331 (H)/
725 (H)}
1,200 721 (H)
1,500
321 (H)/331 (H)/
725 (H)
3,000 757 (H)

V140707
Access Controller
Touch-panel Metal Housing / Illuminated Touch-panel
Command List
Mode
M4/M6/M8
M4//M6M8
M4/M8
M4/M8
M4/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M6
M4/M8
M4/M8
M4/M8
M4/M8
M4/M6/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M6/M8
M4/M8
M6
M4/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
Function
Enter program mode
Exit program mode
Exit program mode and enter arming mode
Node ID setting (Connected to 716E)
Node ID setting (Connected to the PC directly
without 716E)
Mifare tag / card format (Optional)
Door Relay Time setting
Alarm Relay Time setting
Control mode setting
Arming Delay Time setting
Alarm Delay Time setting
Master card (Administrator) setting
Auto-open time zone setting
Master code setting
Suspend / Delete tag
Add a batch of sequential cards by inputting card
number (M6)
Recover the suspended cards
Set the access mode of the user at the designated
User Address as "Card or PIN"
Set the access mode of the user at the designated
User Address as "Card & PIN"
Arming Pulse Time setting
M4/M8:Duress code setting
M6:Public PIN setting for access mode "Card or PIN"
Card number modication
M4/M8:Arming PWD setting
M6:Public PIN setting for access mode "Card & PIN"
Door Close Time
Add card by presenting(M4/M8)
Reader additional setting
Lift control setting: multi-oor
Add/Delete tag by presenting (M6 only)
AR-401RO16 Lift Relay Activated TM
Controller parameter setting
Controller time clock setting
Anti-pass-back (Enable user)
Lift control setting: single oor
Double Door Control / Force Open Alarm
Delete all tags
Enable the security trigger signal ( with AR-721RB)
Description
PPPPPP=Master Code, default value=123456
NNN=Node ID of Access Controller (range: 001~016)
NNN=Node ID of Access Controller (range: 001~254)
VVV=Virtual 716E Node ID, nnn=Door number (range:001~254)
N: 0=ISO14443A; 1=ISO14443B; 2=ISO15693;
3=I Code1; 4=I Code2
PS.1. Please select the transmission standard rst.
2. Ensure both reader and card using the same transmission standard.
TTT=Door relay time 000= Output continuously
001~600=1~600 sec.
601~609=0.1~0.9 sec.
TTT=Alarm relay time 000= Output continuously 001~600=1~600 sec.
N=4: M4; N=6: M6; N=8: M8
TTT=the buffer time before entering arming mode 001~600=1~600 sec.
TTT=the buffer time before the alarm is activated 001~600=1~600 sec.
SSSSS-EEEEE=00000-01023 (00000-03000 for AR-725H);
SSSSS=Starting User Address; EEEEE=Ending User Address
N= 0 (1st time zone) / 1 (2nd time zone)
HHMM= Starting time; hhmm= ending time
(i.e.: 08301600=08:30 to 16:00)
7123456H= 7 days of week (Sun/Mon/Tue/Wed/Thu/Fri/Sat)+ Holiday
(H= 0: disable; 1: enable); Holidays can be set by 701Client software.
PPPPPP=6-digit new master code
RRRRRR=Reconrm the new master code
=Suspend =Delete;
SSSSS=Starting User Address, EEEEE=Ending User Address
SSSSS=Starting card number
EEEEE=Ending card number
SSSSS=Starting User Address
EEEEE=Ending User Address
Access mode: Card or PIN; UUUUU=User Address;
PPPP=4-digit private PIN (0001~9999); 0000=Card Only for this user
Access mode: Card & PIN; UUUUU=User Address;
PPPP=4-digit private PIN (0000~9999)
TTT=Arming output time; 000=output continuously 001~250=0.1~2.5 sec.
PPPP=4-digit duress code (0001~9999; default value=4321; 0000=disable
the function of simply inputting PIN to get access in M6)
UUUUU= User Address; SSSSS=5-digit site code; CCCCC=5-digit card code
PPPP=4-digit Arming PWD (0001~9999; default value=1234; 0000= access
mode will become "Card Only" in M6)
TTT=Door Close Time: 001~600=1~600 sec.; default value: 15 sec.
UUUUU=User Address; QQQQQ=Card quantity (00001: for adding a single
card or a batch of random numbering cards)
Please refer to function default value for details.
UUUUU=User Address, S=4 sets of lift control (0~3); FFFFFFFF=8 assigned oor
(F=0: Disable, 1: Enable)
N=0(Delete tag); N=1(Add tag)
NNN=site number, TTT= relay time: 000~600=1~600 sec.
Please refer to function default value for details.
YYMMDDHHmmss: Year/ Month/ Day/ Hour/ Min./ Sec.
SSSSS=Starting User Address; EEEEE=Ending User Address;
N=0: Enable; N=1: Disable; N=2: Reset
UUUUU=User Address; FF=Floor (01~32 oor)
Please refer to function default value for details.
Change the "Arming" (in ) to the security trigger signal,
when controller is connected with AR-721RB.
9
P5
Command
PPPPPP
00 NNN
00 NNN VVV nnn
01 N
02 TTT
03 TTT
04 N
05 TTT
06 TTT
07 SSSSS EEEEE
08 N HHMMhhmm 7123456H
09 PPPPPPRRRRRR
10 SSSSS EEEEE (M6)
10 SSSSS EEEEE (M4/M8)
11 SSSSS EEEEE
11 SSSSS EEEEE
12 UUUUU PPPP
13 UUUUU PPPP
14 TTT
15 PPPP
16 UUUUU SSSSSCCCCC
17 PPPP
18 TTT
19 UUUUU QQQQQ
20 DDD
21 UUUUU S FFFFFFFF
22 N
23 NNN TTT
24 DDD
25 YYMMDDHHmmss
26 SSSSS EEEEE N
27 UUUUU FF
28 DDD
29 29
34 128 (321H/721H/725H/757H)
34 064 (331H) 34 000 (Disable)
9