Nostalgia KPM200CART Quick guide

All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2017 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 10/18/17 SN)

KPM200CART
Vintage 2.5 Oz. Popcorn Cart
Carrito de palomitas de maíz
Chariot à maïs soué
Instructions and Recipes
Instrucciones y recetas
Consignes et recettes

ENGLISH
2
Make every day a party!
Visit www.nostalgiaproducts.com for more fun products.
CONTENTS
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ADDITIONAL IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . .13
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SAFETY
Appliance Specications:
120 Volts, 60 Hz
300 Watts
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Refer to www.nostalgiaproducts.com/user-manuals/ for the most updated manual.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
cause serious injury to you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.

ENGLISH
3
IMPORTANT SAFEGUARDS
A person who has not read and understood all operating and safety instructions
is not qualied to operate this appliance. All users of this appliance must read and
understand this Instruction Manual before operating or cleaning this appliance.
When using electrical appliances, basic safety precautions
should always be followed, including:
1. Read all instructions before operating this appliance.
2. DO NOT TOUCH the hot surfaces. Use handles or knobs.
3. This appliance is NOT A TOY.
4. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
5. Close supervision is necessary when any appliance is used by or near children.
6. To protect against electrical shock do not immerse cord, plug or
any part of this appliance in water or other liquids.
7. Unplug from outlet when not in use, before removing parts and before cleaning.
Allow to cool before putting on or taking o any parts, and before cleaning.
8. DO NOT operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination, repair or adjustment.
9. The manufacturer does not recommend the use of accessory attachments other than
what is provided by the manufacturer. Use of attachments may cause injuries.
10. DO NOT use the appliance for other than its intended use.
11. DO NOT use outdoors. FOR HOUSEHOLD USE ONLY.
12. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
13. DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
14. NEVER leave unit unattended while in use or when plugged into an outlet.
15. Extreme caution must be used when moving an appliance containing hot food.
16. Always attach plug to appliance rst, then plug cord in the wall outlet. To
disconnect, turn any control to "o," then remove plug from wall outlet.
ADDITIONAL IMPORTANT SAFEGUARDS
Operating Safety Precautions
1. DO NOT touch kettle and keep door of main unit closed while
operating. Kettle gets VERY HOT during operation.
2. Ensure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
3. Check Kettle for presence of foreign objects prior to use.
4. DO NOT place butter, seasonings, or anything other than popcorn kernels and oil into
the Kettle. Use of these substances may cause hazards and may damage the unit.
5. DO NOT operate unit without oil as the popcorn kernels may burn or smoke.

ENGLISH
4
6. DO NOT leave Kettle motor running once popping has ceased.
7. Exercise caution when emptying popcorn. Always use Crank Handle
to empty popcorn, and make sure the unit is over a countertop so
that residual hot oil running out will not cause burns.
8. DO NOT use the appliance for other than its intended use.
Instructions for the Electrical Cord and Plug
1. This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to t into a polarized outlet only one way.
If the plug does not t fully into the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do not attempt to modify the plug in any way.
2. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
3. If a long detachable power-supply cord or extension cord is used:
• Extension cords can be used if care is exercised in their use.
• The marked electrical rating of the cord or extension cord should
be at least as great as the electrical rating of the appliance.
• When using a longer cord or extension cord, make sure that
the cord does not drape over a countertop or tabletop where
it can be pulled on or tripped over unintentionally.
4. The manufacturer does not recommend using this machine in countries that do not
support 120V AC even if a voltage adapter, transformer, or converter is in use.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the VINTAGE 2.5 OZ. POPCORN CART by Nostalgia™. This 45" tall
vendor-style popcorn cart will be the hit of every party. Enjoy up to ten cups of hot, fresh,
kettle cooked popcorn per batch. It features a large, stainless steel kettle with a built-in
stirring system. There is a compartment in the base of the unit to store supplies, making it
easy to keep the cart well stocked and organized. The POPCORN CART has an easy-to-clean
design, and its accessible height makes serving a snap with old-fashioned style to spare.
Visit www.nostalgiaproducts.com to nd out which kits
and accessories are available for this product!

ENGLISH
5
PARTS & ASSEMBLY
Hardware
#1 Bolt (55mm)
Qty. 4
#2 Bolt (65mm)
Qty. 2
#3 Screw (10mm)
Qty. 2
#4 Screw (8mm)
Qty. 22
#5 Flat Washer
(8mm)
Qty. 2
#6 Flat Washer
(6mm)
Qty. 2
#7 Locking Washer (6mm)
Qty. 2
#11 Locking Washer (3mm)
Qty. 2

ENGLISH
6
Parts
(G) Storage
Compartment
(E) Wheel (2) (F) Door (H1) Kernel Measuring
Cup (2-oz.)
(O) Back Cross Bar (P) Screw Driver
(K1) Wrench
(K2) Wrench
(I) Support Bar (4)
(H2) Oil Measuring
Spoon (1 Tbsp.)
(J) Screw Driver
(A) Main Unit (B) Top Cover (C) Push Handle (D) Bottom Plate
(L) Legs (N) Right Bar
(M) Left Bar

ENGLISH
7
Use provided tools for assembly: Wrench (K1), Wrench (K2), and Screw Driver (J).
1. Use 12 #4 Screws to assemble Top Cover (B), Bottom Plate (D) and Storage
Compartment (G) together. Make sure that the "X" on the Bottom Plate
is facing DOWN and the at edge of the Top Cover faces forward.
2. Attach Push Handle (C) and Storage Compartment (G) using two #3 Screws,
two #11 Locking Washers and two #9 Nuts. Use Screws to attach Push Handle
to exterior of Storage Compartment. Use Locking Washers and Nuts on
interior of Storage Compartment to secure Push Handle.
3. Lift the upper piece of the Top Cover to t the Door (F) into place. Use six #4
Screws to attach the Door (F) to the main compartment assembly in Step 2.
Assembly

ENGLISH
8
5. Use one #4 Screw to attach a Support Bar (I) to one of the wheel assemblies.
Repeat process using the second wheel assembly and second Support Bar (I).
4. Connect one Wheel (E) and the Left Bar (M) with a #2 Bolt, a #5
Flat Washer, a #6 Flat Washer, a #7 Locking Washer, and a #10 Nut
Cap. Repeat process with second wheel and Right Bar (N).
6. Use the Back Cross Bar (O) to connect the wheel and support bar assemblies.