Novell SUSE LINUX ENTERPRISE DESKTOP 11 SP1 - 8-18-2010 VIRTUALIZATION WITH... User manual

SUSE Linux Enterprise
Desktop
www.novell.com11 SP1
August18,2010 Virtualization with Xen

Virtualization with Xen
All content is copyright © 2006–2010 Novell, Inc. All rights reserved.
Legal Notice
This manual is protected under Novell intellectual property rights. By reproducing, duplicating or
distributing this manual you explicitly agree to conform to the terms and conditions of this license
agreement.
This manual may be freely reproduced, duplicated and distributed either as such or as part of a bundled
package in electronic and/or printed format, provided however that the following conditions are ful-
lled:
That this copyright notice and the names of authors and contributors appear clearly and distinctively
on all reproduced, duplicated and distributed copies. That this manual, specically for the printed
format, is reproduced and/or distributed for noncommercial use only. The express authorization of
Novell, Inc must be obtained prior to any other use of any manual or part thereof.
For Novell trademarks, see the Novell Trademark and Service Mark list http://www.novell
.com/company/legal/trademarks/tmlist.html. * Linux is a registered trademark of
Linus Torvalds. All other third party trademarks are the property of their respective owners. A trademark
symbol (®, ™ etc.) denotes a Novell trademark; an asterisk (*) denotes a third party trademark.
All information found in this book has been compiled with utmost attention to detail. However, this
does not guarantee complete accuracy. Neither Novell, Inc., SUSE LINUX Products GmbH, the authors,
nor the translators shall be held liable for possible errors or the consequences thereof.

Contents
About This Manual vii
Part I Getting Started with Xen 1
1Introduction to Xen Virtualization 3
1.1 BasicComponents......................... 3
1.2 Understanding Virtualization Modes . . . . . . . . . . . . . . . . . 5
1.3 Xen Virtualization Architecture . . . . . . . . . . . . . . . . . . . . 5
1.4 The Virtual Machine Host . . . . . . . . . . . . . . . . . . . . . . 6
2Setting Up a Virtual Machine Host 9
2.1 Best Practices and Suggestions . . . . . . . . . . . . . . . . . . . 10
2.2 Managing Domain0 Memory . . . . . . . . . . . . . . . . . . . . 11
2.3 Network Card in Fully Virtualized Guests . . . . . . . . . . . . . . . 12
2.4 Starting the Virtual Machine Host . . . . . . . . . . . . . . . . . . 14
2.5 PCIPass-Through......................... 15
3Setting Up Virtual Machines 19
3.1 Creating a Virtual Machine . . . . . . . . . . . . . . . . . . . . . 20
3.2 Installing an Operating System . . . . . . . . . . . . . . . . . . . 21
3.3 Including Add-On Products in the Installation . . . . . . . . . . . . . 25
3.4 Using the Command Line to Create Virtual Machines . . . . . . . . . . 26
3.5 Deleting Virtual Machines . . . . . . . . . . . . . . . . . . . . . 26
3.6 Using an Existing SUSE Linux Enterprise Desktop Virtual Machine . . . . . 27
3.7 Troubleshooting ......................... 28

4Updating SLE 10 Systems to SLE 11 29
4.1 Boot Loader Conguration . . . . . . . . . . . . . . . . . . . . . 30
Part II Advanced Congurations 31
5Managing a Virtualization Environment 33
5.1 Virtual Machine Manager . . . . . . . . . . . . . . . . . . . . . 34
5.2 Controlling the Host by Modifying Xend Settings . . . . . . . . . . . . 36
5.3 Conguring a Virtual Machine by Modifying its Xend Settings . . . . . . 37
5.4 The xm Command......................... 38
5.5 Automatic Starting of Domains . . . . . . . . . . . . . . . . . . . 40
5.6 Migrating Xen VM Guest Systems . . . . . . . . . . . . . . . . . . 41
6Virtual Networking 45
6.1 VirtualBridges.......................... 46
6.2 Network Devices for Guest Systems . . . . . . . . . . . . . . . . . 47
6.3 Host Based Routing in Xen . . . . . . . . . . . . . . . . . . . . . 48
6.4 Creating a Masqueraded Network Setup . . . . . . . . . . . . . . . 51
6.5 Special Congurations . . . . . . . . . . . . . . . . . . . . . . . 53
7Block Devices in Xen 59
7.1 Mapping Physical Storage to Virtual Disks . . . . . . . . . . . . . . . 59
7.2 File-Backed Virtual Disks and Loopback Devices . . . . . . . . . . . . 61
7.3 Resizing Block Devices . . . . . . . . . . . . . . . . . . . . . . . 62
8Virtualization: Conguration Options and Settings 63
8.1 VirtualCDReaders........................ 63
8.2 Remote Access Methods . . . . . . . . . . . . . . . . . . . . . . 66
8.3 VNCViewer........................... 67
8.4 VirtualKeyboards......................... 69
8.5 UsingPVUSB........................... 72
8.6 UsingLockFiles.......................... 74
8.7 HVMFeatures.......................... 74
Part III Administration and Best Practices 77
9Administration Tasks 79
9.1 The Boot Loader Program . . . . . . . . . . . . . . . . . . . . . 79

9.2 Sparse Image Files and Disk Space . . . . . . . . . . . . . . . . . . 82
9.3 Migrating Virtual Machines . . . . . . . . . . . . . . . . . . . . . 84
9.4 Passing Key Combinations to Virtual Machines . . . . . . . . . . . . . 84
9.5 MonitoringXen.......................... 85
9.6 Extra Guest Descriptions in Xen Conguration . . . . . . . . . . . . . 87
9.7 Providing Host Information for VM Guest Systems . . . . . . . . . . . 88
10 Save and Restore of Virtual Machines 91
10.1 Saving Virtual Machines . . . . . . . . . . . . . . . . . . . . . . 91
10.2 Restoring Virtual Machines . . . . . . . . . . . . . . . . . . . . . 92
10.3 Virtual Machine States . . . . . . . . . . . . . . . . . . . . . . . 93
11 Xen as High Availability Virtualization Host 95
11.1 Xen HA with Remote Storage . . . . . . . . . . . . . . . . . . . . 95
11.2 Xen HA with Local Storage . . . . . . . . . . . . . . . . . . . . . 96
11.3 Xen HA and Private Bridges . . . . . . . . . . . . . . . . . . . . . 97
12 SUSE Linux Virtual Machines 99
12.1 Using the Add-On Products Program . . . . . . . . . . . . . . . . 100
12.2 Virtual Machine Clock Settings . . . . . . . . . . . . . . . . . . . 100
12.3 Updating a Network Installation Source . . . . . . . . . . . . . . . 102
13 Virtual Machine Drivers 105
Part IV Appendix 107
AVirtual Machine Initial Start-Up Files 109
BSXP Conguration Options 113

About This Manual
This manual offers an introduction to virtualization technology of your SUSE Linux
Enterprise Desktop. It features an overview of the various elds of application and in-
stallation types of each of the platforms supported by SUSE Linux Enterprise Desktop
as well as a short description of the installation procedure.
Many chapters in this manual contain links to additional documentation resources. This
includes additional documentation that is available on the system as well as documen-
tation available on the Internet.
For an overview of the documentation available for your product and the latest docu-
mentation updates, refer to http://www.novell.com/documentation.
Quality service is also available. Experts can answer questions about installation or
conguration, make reliable security updates available, and support development
projects.
Documentation regarding the Open Enterprise Server 2 is found at http://www
.novell.com/documentation/oes2/index.html.
1 Available Documentation
We provide HTML and PDF versions of our books in different languages. The following
manuals for users and administrators are available on this product:
KDE User Guide (↑KDE User Guide)
Introduces the KDE desktop of SUSE Linux Enterprise Desktop. It guides you
through using and conguring the desktop and helps you perform key tasks. It is
intended mainly for users who want to make efcient use of KDE as their default
desktop.
GNOME User Guide (↑GNOME User Guide)
Introduces the GNOME desktop of SUSE Linux Enterprise Desktop. It guides you
through using and conguring the desktop and helps you perform key tasks. It is
intended mainly for end users who want to make efcient use of GNOME desktop
as their default desktop.

Application Guide (↑Application Guide)
Learn how to use and congure key desktop applications on SUSE Linux Enterprise
Desktop. This guide introduces browsers and e-mail clients as well as ofce appli-
cations and collaboration tools. It also covers graphics and multimedia applications.
Deployment Guide (↑Deployment Guide)
Shows how to install single or multiple systems and how to exploit the product
inherent capabilities for a deployment infrastructure. Choose from various approach-
es, ranging from a local installation or a network installation server to a mass de-
ployment using a remote-controlled, highly-customized, and automated installation
technique.
Administration Guide (↑Administration Guide)
Covers system administration tasks like maintaining, monitoring and customizing
an initially installed system.
Security Guide (↑Security Guide)
Introduces basic concepts of system security, covering both local and network se-
curity aspects. Shows how to make use of the product inherent security software
like Novell AppArmor (which lets you specify per program which les the program
may read, write, and execute) or the auditing system that reliably collects informa-
tion about any security-relevant events.
System Analysis and Tuning Guide (↑System Analysis and Tuning Guide)
An administrator's guide for problem detection, resolution and optimization. Find
how to inspect and optimize your system by means of monitoring tools and how
to efciently manage resources. Also contains an overview of common problems
and solutions and of additional help and documentation resources.
Virtualization with Xen (page 1)
Offers an introduction to virtualization technology of your product. It features an
overview of the various elds of application and installation types of each of the
platforms supported by SUSE Linux Enterprise Server as well as a short description
of the installation procedure.
In addition to the comprehensive manuals, several quick start guides are available:
KDE Quick Start (↑KDE Quick Start)
Gives a short introduction to the KDE desktop and some key applications running
on it.
viii Virtualization with Xen

GNOME Quick Start (↑GNOME Quick Start)
Gives a short introduction to the GNOME desktop and some key applications
running on it.
OpenOfce.org Quick Start
Gives a short introduction into the OpenOfce.org suite and its modules for writing
texts, working with spreadsheets, or creating graphics and presentations.
Installation Quick Start (↑Installation Quick Start)
Lists the system requirements and guides you step-by-step through the installation
of SUSE Linux Enterprise Desktop from DVD, or from an ISO image.
Linux Audit Quick Start
Gives a short overview how to enable and congure the auditing system and how
to execute key tasks such as setting up audit rules, generating reports, and analyzing
the log les.
Novell AppArmor Quick Start
Helps you understand the main concepts behind Novell® AppArmor.
Find HTML versions of most product manuals in your installed system under /usr/
share/doc/manual or in the help centers of your desktop. Find the latest documen-
tation updates at http://www.novell.com/documentation where you can
download PDF or HTML versions of the manuals for your product.
2 Feedback
Several feedback channels are available:
Bugs and Enhancement Requests
For services and support options available for your product, refer to http://www
.novell.com/services/.
To report bugs for a product component, please use http://support.novell
.com/additional/bugreport.html.
Submit enhancement requests at https://secure-www.novell.com/rms/
rmsTool?action=ReqActions.viewAddPage&return=www.
About This Manual ix

User Comments
We want to hear your comments and suggestions about this manual and the other
documentation included with this product. Use the User Comments feature at the
bottom of each page in the online documentation or go to http://www.novell
.com/documentation/feedback.html and enter your comments there.
3 Documentation Conventions
The following typographical conventions are used in this manual:
•/etc/passwd: directory names and lenames
•placeholder: replace placeholder with the actual value
•PATH: the environment variable PATH
•ls,--help: commands, options, and parameters
•user: users or groups
•Alt,Alt +F1: a key to press or a key combination; keys are shown in uppercase as
on a keyboard
•File,File >Save As: menu items, buttons
•Dancing Penguins (Chapter Penguins, ↑Another Manual): This is a reference to a
chapter in another manual.
xVirtualization with Xen

Part I. Getting Started with Xen

1
Introduction to Xen
Virtualization
Virtualization of operating systems is used in many different computing areas. It nds
its applications in server consolidation, energy saving efforts, or the ability to run older
software on new hardware, for example. This chapter introduces and explains the
components and technologies you need to understand to set up and manage a Xen-based
virtualization environment.
1.1 Basic Components
The basic components of a Xen-based virtualization environment are the Xen hypervisor,
the Domain0, any number of other VM Guests, and the tools, commands, and congu-
ration les that let you manage virtualization. Collectively, the physical computer run-
ning all these components is referred to as a VM Host Server because together these
components form a platform for hosting virtual machines.
The Xen Hypervisor
The Xen hypervisor, sometimes referred to generically as a virtual machine monitor,
is an open-source software program that coordinates the low-level interaction be-
tween virtual machines and physical hardware.
The Domain0
The virtual machine host environment, also referred to as Domain0 or controlling
domain, is comprised of several components, such as:
Introduction to Xen Virtualization 3

• The SUSE Linux operating system, which gives the administrator a graphical
and command line environment to manage the virtual machine host components
and its virtual machines.
NOTE
The term “Domain0” refers to a special domain that provides the manage-
ment environment. This may be run either in graphical or in command
line mode.
• The xend daemon (xend), which stores conguration information about each
virtual machine and controls how virtual machines are created and managed.
• A modied version of QEMU, which is an open-source software program that
emulates a full computer system, including a processor and various peripherals.
It provides the ability to host operating systems in full virtualization mode.
Xen-Based Virtual Machines
A Xen-based virtual machine, also referred to as a VM Guest or DomU consists
of the following components:
• At least one virtual disk that contains a bootable operating system. The virtual
disk can be based on a le, partition, volume, or other type of block device.
• Virtual machine conguration information, which can be modied by exporting
a text-based conguration le from xend or through Virtual Machine Manager.
• A number of network devices, connected to the virtual network provided by the
controlling domain.
Management Tools, Commands, and Conguration Files
There is a combination of GUI tools, commands, and conguration les to help
you manage and customize your virtualization environment.
4Virtualization with Xen

1.2 Understanding Virtualization
Modes
Guest operating systems are hosted on virtual machines in either full virtualization
mode or paravirtual mode. Each virtualization mode has advantages and disadvantages.
• Full virtualization mode lets virtual machines run unmodied operating systems,
such as Windows* Server 2003 and Windows XP, but requires the computer running
as the VM Host Server to support hardware-assisted virtualization technology, such
as AMD* Virtualization or Intel* Virtualization Technology.
Some guest operating systems hosted in full virtualization mode, can be congured
to run the Novell* Virtual Machine Drivers instead of drivers originating from the
operating system. Running virtual machine drivers improves performance dramat-
ically on guest operating systems, such as Windows XP and Windows Server 2003.
For more information, see Chapter 13, Virtual Machine Drivers (page 105).
• Paravirtual mode does not require the host computer to support hardware-assisted
virtualization technology, but does require the guest operating system to be modied
for the virtualization environment. Typically, operating systems running in paravir-
tual mode enjoy better performance than those requiring full virtualization mode.
Operating systems currently modied to run in paravirtual mode are referred to as
paravirtualized operating systems and include SUSE Linux Enterprise Desktop 11
and NetWare® 6.5 SP8.
1.3 Xen Virtualization Architecture
The following graphic depicts a virtual machine host with four virtual machines. The
Xen hypervisor is shown as running directly on the physical hardware platform. Note,
that the controlling domain is also just a virtual machine, although it has several addi-
tional management tasks compared to all other virtual machines.
Introduction to Xen Virtualization 5

Figure 1.1 Virtualization Architecture
On the left, the virtual machine host’s Domain0 is shown running the SUSE Linux op-
erating system. The two virtual machines shown in the middle are running paravirtualized
operating systems. The virtual machine on the right shows a fully virtual machine run-
ning an unmodied operating system, such as Windows Server 2003 or Windows XP.
1.4 The Virtual Machine Host
After you install the virtualization components and reboot the computer, the GRUB
boot loader menu displays a Xen menu option. Selecting the Xen menu option loads
the Xen hypervisor and starts the Domain0 running the SUSE Linux operating system.
Running on Domain0, the SUSE Linux operating system displays the installed text
console or desktop environment, such as GNOME or KDE. The terminals of VM Guest
systems are displayed in their own window inside the controlling Domain0 when opened.
6Virtualization with Xen

Figure 1.2 Desktop Showing Virtual Machine Manager and Virtual Machines
Introduction to Xen Virtualization 7

2
Setting Up a Virtual Machine
Host
This section documents how to set up and use SUSE Linux Enterprise Desktop 11 SP1
as a virtual machine host.
In most cases, the hardware requirements for the Domain0 are the same as those for
the SUSE Linux Enterprise Desktop operating system, but additional CPU, disk,
memory, and network resources should be added to accommodate the resource demands
of all planned VM Guest systems.
TIP
Remember that VM Guest systems, just like physical machines, perform better
when they run on faster processors and have access to more system memory.
The following table lists the minimum hardware requirements for running a typical
virtualized environment. Additional requirements have to be added for the number and
type of the respective guest systems.
Table 2.1 Hardware Requirements
Minimum RequirementsSystem Compo-
nent
Computer with Pentium II or AMD K7 450 MHz processorComputer
512 MB of RAM for the hostMemory
Setting Up a Virtual Machine Host 9

Minimum RequirementsSystem Compo-
nent
7 GB of available disk space for the host.Free Disk Space
DVD-ROM DriveOptical Drive
20 GBHard Drive
Ethernet 100 MbpsNetwork Device
IP Address • One IP address on a subnet for the host.
• One IP address on a subnet for each VM Guest.
Xen virtualization technology is available in SUSE Linux Enterprise Desktop products
based on code path 10 and later. Code path 10 products include Open Enterprise Server
2 Linux, SUSE Linux Enterprise Desktop 10, SUSE Linux Enterprise Desktop 10, and
openSUSE 10.x.
The virtual machine host requires a number of software packages and their dependencies
to be installed. To install all necessary packages, run YaST Software Management, select
View >Patterns and choose Xen Virtual Machine Host Server for installation. The in-
stallation can also be performed with YaST using the module Virtualization >Install
Hypervisor and Tools.
After the Xen software is installed, restart the computer.
Updates are available through your update channel. To be sure to have the latest updates
installed, run YaST Online Update after the installation has nished.
2.1 Best Practices and Suggestions
When installing and conguring the SUSE Linux Enterprise operating system on the
host, be aware of the following best practices and suggestions:
10 Virtualization with Xen